New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Four drawer nightstand

Posts

Re: Four drawer nightstand

#26

Simple solution ...

Derek Cohen (in Perth, Australia)

... just build everything with three legs, never four. :)

I cannot recall ever building something and preempting a levelling issue.

Regards from Perth

Derek

Re: Four drawer nightstand

#27

Re: Another undiscussed design element....

roger lance

These particular glides/levelers are solid and there is no rattle (if the piece of furniture does not move = no rattle.....and the felt pads which could be added in addition to preventing scratching a wood floor also resist movement....could also use the black self stick rubber padding Lee Valley is selling on their hockey pucks to make stock supports....that would resist movement as well)....obviously, no one was aware of the presence of this hardware until I pointed it out, so it passes the obtrusive test. I found that the current Stickley/Audi company uses levelers on their very expensive furniture except their hardware is of a much lower quality grade (often just plastic)....I don't know what your experiences have been but I've run into many a floor that was not flat....carpeted floors help to alleviate this problem but wood or tiled floors of various hard goods present a potential problem to furniture and it seemed a simple solution to me....one or two levelers backed out a small amount and problem solved and hopefully with little to no visual attention drawn to it.

Re: Four drawer nightstand

#28

Re: Simple solution ...

roger lance

Derek....certainly you have designed and built items with a look toward being able to handle a potential problem or issue....a workbench for example....don't you have to consider how will my workbench design handle this clamping situation or that....even though you personally have not worked this particular way....but it is very possible that you might??....it is very possible that you might encounter an uneven floor....why not design for that ??

Re: Four drawer nightstand

#29

Re: Four drawer nightstand

Pam Niedermayer

OK, with me, but I'm not the one you need to please. :)

Pam

Re: Four drawer nightstand

#30

Re: Another undiscussed design element....

TomD

Yeah, your feet are way nicer than the ones I got. Mine were not that nice. Another reason I don't like them is I don't really like fritzing with them, cranking the furniture up and screwing stuff in and out. Then it gets moved and it starts all over again. Level hasn't been a problem for me, and I think they were onto something with the wedge. But that piece you have would be super rigid so you are going to end up doing something.

Speaking of 3 legs, before I got my South Bend Heavy ten with the cast iron base, I worried quiet a bit about how I would level it since it looked as though the base would settle and make it very difficult not to really torque the outboard part, and damage something, even just while getting everything organized. When I got the lathe it had the old leveling instructions and the cabinet/base part was only in contact at one point. Technically it was called a leg. Crafty people those machinists.

A 2" point of the base under the orange door is the only part that touches the floor:

http://shanewhitlock.com/photo/d/3995-2/IMG_8162.jpg

Re: Four drawer nightstand

#31

Re: Four drawer nightstand

Charles Jackson III

Nice nightstand.

Re: Four drawer nightstand

#32

A pretty critical element

James Watriss

I've been using a lot of levelers lately. In fact, on anything designed to butt up against a wall, I've started making the back legs automatically shorter... rooms up here in the Boston area always seem to slope towards the middle of the room.

About a year ago I was building a built-in bookcase that wrapped around a french door. Originally, the design called for levelers in the bases, and as the project wound down, I decided to skip it. Big mistake. The room dropped by over an inch across 12 feet, and I basically had to make a pedestal for the left stack to sit on, so the whole thing would come together square.

Built-in desk over the summer had 2 filing cabinets and a chest of drawers supporting the work surface. Again, old house. I made the back legs shorter by an inch on all of the carcases, and installed levelers inboard from there. I ended up taking the levelers out... the whole inch was needed to level out every cabinet.

Bookcases for a friend, I made a separate pedestal, and simply installed the levelers inside the pedestal, so I could level that, and then drop the bookcase in on top. These were made high enough to get the bookcases clear of the baseboard, so he could screw the bookcase directly to the wall, as his infant son is crawling now, and starting to stand up. The 8' baby gate I built for him to wall off his 'office' area had to be scribed to the floor to make the top part level. Almost 2" drop across the 8 foot span, with the high end butting up against the exterior wall of the house.

Yeah, levelers are a good thing. :)

Old New England homes... gotta love em.

Re: Four drawer nightstand

#33

Re: A pretty critical element

roger lance

James...its good to get some agreement on this issue....I was thinking of the process of building a grandfather's clock....and thinking of how small the footprint is in comparison to the height of the clock and the weight of the mechanism high up in the clock....how would you make such a thing with out a leveling system (and a way of attaching the back to the wall for safety)??....where are you in Boston??....I've got a brother in Bedford.

Re: Four drawer nightstand

#34

Re: A pretty critical element

James Watriss

I'm in Arlington... it's pretty close to Bedford.

Some of those clocks were huge. There's one in the White House that was made by the Seymours, that's 9 feet tall. I haven't lookied inside of one, but I'm sure that whoever set them up made sure they were leveled out... and possibly fastened to the wall somehow.

Re: Four drawer nightstand

#35

Re: A pretty critical element

Warren in Lancaster, PA

18th century tall case clocks don't have levellers and are not usually attached to a wall, but I have a friend whose child pulled one down and after that he secured it. The mechanism has to be level to work well and accurately so levelling is taken very seriously at the time of set up.