New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

The Cohen/Vogt/Lance shooting board...

Posts

The Cohen/Vogt/Lance shooting board...

#1

The Cohen/Vogt/Lance shooting board...

roger lance

Derek....here are some photos of the board I spoke of....I'm still new to posting pics so I've got my fingers crossed


just a general picture of the board with the various fences...board set at 90 degrees....a ramped board


45 degree fence....just trying to use one tool to make all adjustments....used your running fence....and Tico's two part fences


used PSA sandpaper set in a shallow dado to bring the work level with the board surface....no sliding of the work


the donkey's ear is big....but it works well....hope you liked the board....will be using it for awhile to discover where I need to improve it....hope the photos worked.

Re: The Cohen/Vogt/Lance shooting board...

#2

Re: The Cohen/Vogt/Lance shooting board...

TomD

Very clean execution. What is the fence on the right for. Looks like it would eat errant fingers.

Re: The Cohen/Vogt/Lance shooting board...

#3

Re: The Cohen/Vogt/Lance shooting board...

roger lance

that is Derek's running fence which is well discussed on his site (In The Woodshop)....its purpose is to help keep the plane running against the work as oppose to drifting away....this fence will accommodate planes from a 3 to a LN 51....the assumption is that you would be gripping the shooting plane on its left side and your fingers will not be in any danger from the running fence....also the top of the bolts on that fence are below the plane's knob and tote....so no damage there either.

Re: The Cohen/Vogt/Lance shooting board...

#4

Re: The Cohen/Vogt/Lance shooting board...

Derek Cohen (in Perth, Australia)

Hi Roger

That is beautifully machined. Really, excellent work.

Question: have you included a way of making micro-adjustments for the fences? Wood moves, gets bumped, becomes worn. To add this to an existing set up, but enlarge the outside hole on the fence so that it can move back-and-forth.


The reason I attach the secondary fences to the main (straight fence) is that the latter has micro-adjustment. Automatically, all the other fences (mitre and donkey's ear) also have micro-adjustment.

The running fence makes a HUGE improvement to the accuracy of shooting and in the ease of using a shooting board.

Links: http://inthewoodshop.com/ShopMadeTools/RunningFencefortheShootingBoard.html

On the most recent boards I designed, the fence also slides back-and-forth, and as a result, it does not require a two-part fence.

http://inthewoodshop.com/ShopMadeTools/ShootingBoardsfortheLNHandtoolEvent.html

Regards from Perth

Derek

Re: The Cohen/Vogt/Lance shooting board...

#5

Re: The Cohen/Vogt/Lance shooting board...

roger lance

Derek....yes, all fences and the donkey's ear have micro adjustability....I'll eventually try to make a decent hotdog for the LV LAJ....how goes the bench after the first day??

Re: The Cohen/Vogt/Lance shooting board...

#6

Re: The Cohen/Vogt/Lance shooting board...

Michael Brady

Nice design and execution. The exposed bolt heads on the runner make my knuckles recoil a bit, however. Evenfall's shooting board is bit simpler and way less money than the Vogt. Ramped boards to me are more for show than go. I doubt that they really are effective in retaining edges and prolonging sharpening intervals. I guess that if you are building a complex board like this one you might as well include it. Shooting boards wear out fairly quicky on the vertical part of the ramp that faces the sole of the plane. That part can get out of square readily. I would like to see that face made replaceable and/or adustable.

Re: The Cohen/Vogt/Lance shooting board...

#7

Re: The Cohen/Vogt/Lance shooting board...

roger lance

Michael....its very difficult to see, but there is a "spacer" of hard maple that I've fitted into a rabbet along the right side of the ramp....the plane never touches the ramp (if the user does not tilt the plane over to the ramp and then plane away, that is)....the spacer can be accessed by removing the board that the plane rides on ....now that hard maple strip can be repositioned 4 times (ie 4 edges) before it would need to be replaced which I believe will be a very long time....watch Tico Vogt"s video of his Super Chute II board on his site....it runs about 6 minutes and will explain this concept....he uses a man-made product....but I felt hard maple was hard enough.

Re: The Cohen/Vogt/Lance shooting board...

#8

Re: The Cohen/Vogt/Lance shooting board...

roger lance

Michael....also go to Derek Cohen's inthewoodshop.com and see his "hotdog" and manner of gripping a plane for shooting....I do not see how the bolt heads should get to my knuckles....but if it happens, you can bet your last money I will make a change.

Re: The Cohen/Vogt/Lance shooting board...

#9

A modification for Tom & Michael....

roger lance

while visiting the hardware, I ran across these screws with the nice gently rounded heads that are shorter than the height of the hex headed bolts I was using on the running fence. Even though I had not run my knuckles into those bolts, I remember your comments and made a change....improvement is the name of the game.


Re: The Cohen/Vogt/Lance shooting board...

#10

Re: A modification for Tom & Michael....

Bill Houghton, Sebastopol, CA

Always better to be safer than you absolutely have to be. Good improvement.

You might look for "pan" or "truss" head screws, ideally in internal hex ("Allen") head. These are even lower profile, and don't have a slot to create an edge.

The next step would be making a recessed slot (wider slot) partway into the fence to receive the screw heads; but this may be more work than value.

Re: The Cohen/Vogt/Lance shooting board...

#11

Re: A modification for Tom & Michael....

Michael Brady

That is the uber-schuten platz, for sure. Nice modifications. Based on what I see commercial shooting boards being sold for, you could ask big$ for that one. Very nice.