New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Thanks to Rob Lee/An Informal Plane review (LONG)

Posts

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#51

Re: That's a really nice shop.

philip marcou

Bruce, that band saw has no visible maker name, but I guess it might be German because it has Steyr bearings and the grease cups have a distinctly Teutonic embossed design on them. There might have been a name on the sheet metal wheel covers but these had been rusted and burnt beyond any practical recovery so I made those wooden ones. It took me four years to persuade the owner to part with it-even though it was dumped in a field outside his sheds he always insisted that he was "going to rebuild it one day". I eventually got hold of it in 1984.It has a tilting table and one can have it left or right handed.

I plan to rig it up with a reduction gear box so I can cut steel with it-one day.

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#52

Re: That's a really nice shop.

Bruce, a MN Galoot

Yeah, probably not a Crescent, which were made in Minnesota. There is one that looks exactly like it at a cabinet shop not too far from my home but the buggers won't sell it to me. I suspect there's not much chance that Crescents would have made it to the land of Kiwis. However, I did see one of these at the hot air balloon fiesta in Albuquerque, NM, in October (just a minor non sequitur).


Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#53

Re: Blade location in plane sole

bugbear

I want it to ride the existing surface and refine it by .001” increments, not change its shape.

Some Japanese smoothers only make a 2 point contact with the surface, and do exactly this.

http://swingleydev.com/archive/get.php?message_id=112166&submit_thread=1#message

BugBear

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#54

Crescent... Minnesota?

Mike L

I think the Crescent factory was in Leetonia, OH.

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#55

Double bevel *LINK*

Warren in Lancaster, PA

Thanks David, I realize that you do not discount the double iron.

You mentioned the "double bevel iron" of the 1820's. I have not seen the reference you mention, but I have seen two others references which are rather interesting. Charles Wilks Williamson (1793-1881), employed by a printer, claimed to have invented the back bevel. Interestingly he did not seem to know about York pitch etc. He claims the back bevel is helpful for woods that he could not plane cleanly with a double iron. The first reference is his pitch in the Transactions of the Royal Society. The second reference is a description in the Journal of the Franklin Institute. There is also a comment by the Journal Editor, who had just become head of the U.S. patent office. He dismisses the invention as just a variation of the high angle plane.


Royal Society Transactions

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#57

Re: That's a really nice shop.

philip marcou

Bruce, I have seen the remains of at least two Crescent band saws here in Kiwistan.

Just to be clear- that bandsaw and indeed most of the stuff you see in my shop came from Rhodesia (Zimbabwe) with me . I don't recall seeing Crescent machinery in Zim at any time but certainly plenty of Oliver, Parks and Delta stuff. And of course THE CRESCENT WRENCH which you Americans claim (erroneously) to have invented :D

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#58

Re: second reference *LINK*

david weaver

I can't find what I was looking for, but I thought this discussion was interesting, because it brings into play the idea of having a thick iron.

Best I can tell, though, the thick iron is for sharpening and to resist breaking, and not for the same thing people may prefer a thick iron now, especially in iron planes (stability when the bed isn't perfect).

I haven't got a great preference for any particular thing in planes, except to not have a steel with large carbides on a smoothing plane. And to not have a plane that is improperly made (which is usually a matter of incompleteness, not a terminal issue) or improperly fitted.

The rest is up in the air, though I'll admit I haven't played with double iron planes putting the second iron in play so that it's actually productive in quite some time - a year and a half lately (due to my comment above about ease of sharpening, replacement in the plane and resetting). I've been doing the back and forth between an infill and single iron planes (western or eastern origin), depending on the need.

I have a common pitch infill in the works, with a double iron. Maybe it'll give me a chance to play a little more. It is my preference still to break the chip with the mouth, something not quite so practical in smoothing with a wooden plane, except in the cases where a craftsman added a steel toe to their smoother.

(For whatever reason, my link isn't working - the source that it's coming from is the glasgow mechanics magazine to the left - 1826 - which is about the right time compared to your description of the lifetime of the person who credited themselves with the double bevel discovery)


Two Bevel Discussion

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#59

Crescent wrench

Bill Houghton, Sebastopol, CA

Another example of a company name becoming the generic term. Crescent wrench; kleenex; biro in England (I know there are others Over There; just not coming to mind right now). Lots of examples.

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#60

Adjustable spanner?

GolfSteve in Calgary

When I worked in Aussie land we/they referred to cresent wrenches as adjustable spanners. 10 years later back in Canada I still call them adjustable spanners and put petrol in my car :-) (Actually I have a diesel car, but my wife has a petrol car).

Pipe wrenches also had a funny name which I now forget.

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#61

Re: Adjustable spanner?

philip marcou

Actually, "adjustable spanner" is awfully posh, you know . Where I come from (not NZ) the tool is called a "shifting spanner". It was the same on the oil rigs in the North Sea. And a pipe wrench is known as a "monkey wrench"-can't think why. Then there is the King Dick.... (another type of shiftable spanner).

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#62

In Central Pennsylvania...

david weaver

.. with my relatives, at least, when I was growing up it was referred to as an "adjustable wrench".

The first time someone called it a "crescent wrench", I don't know how old I was, but I do recall looking for a wrench that was either shaped like a moon, or one that was intended for moon-shaped fasteners or some such thing.

Either that, or a wrench intended to adjust "high living" rolls (we didn't have things like crescent rolls, either - that was tall cotton kind of stuff - we ate potato rolls).

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#63

Re: Adjustable spanner? *LINK*

Bill Houghton, Sebastopol, CA

Pipe wrenches: Stillson, perhaps? If so, that's a designation of a particular type of pipe wrench (pic below), in which the moving jaw runs in a forging (or casting; I think it's forged, though) that pivots on the fixed jaw/handle.

As to monkey wrench, I'd heard that term used by people for pipe wrenches, too - so it's not just a geographic peculiarity - but the classic monkey wrench is quite different, as illustrated in the Wikipedia article linked: an adjustable wrench on which the movable jaw slides along the handle. I've heard the simple version of these called Ford wrenches, referring to the fact, I guess, that they were factory issue tools on Fords of early vintage.

Oh, well: I guess everyone needs to come up with names to get away from "Hand me that thing there...no, not THAT thing, the other thing."


img

http://en.wikipedia.org/wiki/Monkey_wrench

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#64

Adjustable wrench= Wescott up here.


Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#65

Re: Adjustable spanner?

Schtoo

Actually, in Oz they're called a "shifter". That's it. Never heard them called anything else by anyone who might actually use one to earn a coin.

(I found an 18" Sidchrome one a few years back. Worth about $400, and you couldn't buy one the same at that time. Just pulled it off a beam, got told by all and sundry to keep it. So I did!)

And Bill is right, they're called "Stillsons" or, I think, "Footprints", whether they are or not. Again, never heard them called much else, except in the tool stores where they were trying to flog off a different brand.

And King Dick are good tools. Always have been.

Yeah, I've used a few of these over the years, and grandpa has a garage full of them I've been allowed to use for 30+ years too.

Stu.

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#66

Re: Crescent... Minnesota?

Bruce, a MN Galoot

My mistake. I was thinking Northfield. Chalk it up to shift work.

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#67

Since we've wandered off topic

Bill Houghton, Sebastopol, CA

what do you folks who refer to wrenches as spanners call the closed wrenches that surround the nut? The American term is "box wrench."

When I hear "spanner," I think of the open end wrench that presses against two faces of the nut (as the adjustable spanner does); but the idea of a "box spanner" just seems so odd.

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#68

Re: Since we've wandered off topic

Schtoo

Ring spanner.

Stu.

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#69

What ever happened to "give me that wrench?"


Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#70

Was replaced by...

Bob Hackett

"Hand me that piano". :D

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#71

I did leave off the "please." 


Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#72

"no, not THAT thing, the other thing."

John in NM

That reminds me of one of our work place idioms from a few years ago. A phillips screwdriver was referred to as simply "a phillips" and a flat blade screwdriver was referred to as "a regular phillips"....

And who could forget the all time favorite, the "squammer"

(had to post it again, thread it was in before as a tad off color :D )

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#73

Mebbe it's French...

John in NM

And really a croissant wrench! :D

Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#74

Now, that's funny


Re: Thanks to Rob Lee/An Informal Plane review (LONG)

#75

Isn't that what these are? 


img