New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Finished something...sort of...

Posts

Finished something...sort of...

#1

Chris Scholz

Finished something...sort of...

Chris Scholz

Here's another practice version of a "Real Asian Style" table. I tried to use traditional Chinese joinery (or at least what I think would be traditional Chinese joinery). Design is as simple as I could possible think of, not waisted as it really should be, no moldings.

Material are a few 2x4's that probably don't quite have the right proportions. At this stage for me it is really about learning the joinery so I did not bother preparing the stock.

I got this done much faster than the previous version, that took me 2 years I believe (to be honest I get to dabble

with wood an hour or two on the weekends).



What can I say, it did not turn out that well...

The main learning form the previous version was the order in which to cut mortises and miters.

The next think I need to learn is how to make this miters nice and tight. Any great ideas appreciated. Maybe I need to do some major investment in high-end tools but probably it's as simple as cutting exactly to the line.

The design:


The "final" table:


Few detailed views:




In short, I think I'll end up with a few more practice pieces before I'll tackle indoors furniture.

Re: Finished something...sort of...

#2

Thanks for putting up practice pieces

Bill Houghton, Sebastopol, CA

It takes courage to put up your practice pieces, but the improvement from table 1 to table 2 is inspiring to those of us (my hand goes up) who hesitate to tackle the tough stuff because we think we'll fail.

Nice designs - looking forward to the next version.

Re: Finished something...sort of...

#3

Re: Finished something...sort of...

roger lance

Chris....congratulations for taking on such complicated joinery.....we had a discussion here not so long ago about the rarity of western woodworkers making Chinese joints/furniture....you must be a fan of Chinese furniture (so am I, but I've not attempted their joints)....since you plan to make more practice pieces, I'd suggest that you also mill your boards flat and true before building....these skills need development as well and the result will help improve your joints....any thoughts on using woods that would fair better outdoors ??

Re: Finished something...sort of...

#4

Jack Guzman from Maine

Re: Finished something...sort of...

Jack Guzman from Maine

Thanks for sharing your progress. I think you'll find that better stock preparation will make all the difference for you in getting tighter joints. No tricks,just careful step by step precision(or as close as you can to it). Please post any further progress.---Jack

Re: Finished something...sort of...

#5

Re: Finished something...sort of...

Robin Corell in Atascadero CA

I think rogers sugestuon about preping the stock is a very good one and I would also strongle recomend somethng other than 2x4's. Western hemlock is notoriously difficult to work with hand tools and I think your results reflect that more than any short coming on your part, I suspect that just switching to a beter quality wood , even something like western red cedar woud result in a significant improvment in your joinery.

High quality tools can make a difference. A while ago I picked up a mitsukawa x-cut dozuki and it is an increadable saw. it is very easy to holt to a knife line and produces a very smooth cut. Compared to the piece of garbage replaceable handle dozuki sold to me by Tools For Working Wood it is night and day.

Robin