Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

tail vise vs. end vise

Posts

Re: tail vise vs. end vise

#26

Think you're right...

Joe Shelton

>...your bench is the one I want: Buried under clean shavings.

Can't you fit a dust collector to that thing?

JS

Re: tail vise vs. end vise

#27

One thing about end vise *LINK*

Wiley Horne--So. Calif.

>that I like, is having one well-lit corner which is square and plumb, and with access from two directions, side and end. That is where all the joinery happens.

The access is particularly good on tasks like transferring the dovetail pattern from the tails board to the pins board, with the pins board held vertically in the vise (see link). The pins board is held vertically, and the tails board is clamped down onto it, so it will all hold still during the transfer. There is another shot in that sequence, showing the actual marking, and the access you have from the end. Note that this operation is done in the clear space _outside_ the screw. That turns out to be the best clamping spot on the whole bench. I was expecting that clamping between the screws was the point of a twin-screw, but find that clamping outside the screw at that corner is the best place for so many things.

Also, when a tenon is being sawn onto a rail, the access from both directions is useful in that you can saw the cheeks from the bench front, say, and then saw the end pieces by stepping around to the end side, with the rail still upright where it was.

Wiley


Transferring marks using twin screw end vise

Re: tail vise vs. end vise

#28

Don't know???

roninkokomo

>I have a fairly massive end vise and a leg vise. I have never missed not having a tail vise. I have no idea what I would gain by having one.

Ron

Merry Christmas to all

Re: tail vise vs. end vise

#29

Re: Don't know???

Joe Shelton

>Ron, I also don't know what, if anything, I'd gain with a tailvise instead of my big 'ol end vise. And I also don't know why I'm so overwrought about it. Truth is, I'd be a lot better off if I used the pretty decent bench I've got waiting on me right now, and not worrying any longer that it isn't a tail vise.