Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Pssst! Wanna see spme pretty cherry?

Posts

Re: Pssst! Wanna see spme pretty cherry?

#51

comments

Bill Tindall, E.TN

>"my finish method of choice is pretty labor intensive" I don't think there are any shortcuts to a good finish. They are all labor intensive, even if you spray to cut out some of the labor.

"I see a good finish as an optical path to the inside of the wood," Agreed

"One more argument for the Super blonde as a surface filler, there were a few spots on teh lid where the grain was softer and while it didn't exactly tear out, the pores really opened up, and it got a lot darker."

I have had the same problem with mahogany and garnet. In fact this is the potential problem with supplying the color with the film forming top coat. I think it is more reliable to supply the color with stain and not use a highly colored top coat whose thickness may vary.

Nice trunk! Nice boards in trunk!

Re: Pssst! Wanna see spme pretty cherry?

#52

Thanks, What flavor did you use?

Scott Burr in Ben Lomond, CA

>

Re: Pssst! Wanna see spme pretty cherry?

#53

Nice ! Thanks James...

Scott Burr in Ben Lomond, CA

>I personally like what you did to finish that piece. I've never seen the need to fill cherry, myself. Thanks, I think I finally figured out why one would want to. I'll probably never do it, old fart set in wasys I guess. Never the less I would like to give it a one time.

Thank you for sharing how!

Re: Pssst! Wanna see spme pretty cherry?

#54

Re: Thanks, What flavor did you use?

ThomD

>Regarding Watco? If so I pretty much use the "natural" for everything. When I use Watco. I just keep the stained version around for stuff other people bring to me. Like a guy walked into my shop once and said he wanted woodwork that looked like stuff he had seen in "Crouching Tiger, Hidden Dragon", could have been spray painted foam for all I know. I used a combination of stains to get the effect without having to build much oppacity on the surface. So it can help to have a lot of things so that one can build the effect. Also useful for patching floors. I hope that answers your question, and that your question was directed at me. Sometimes hard to tell with the Guestbook format.

Watco is a lot like other finishes one can buy or make. But within that range, it is reasonably bright for an oil finish. And it comes in a can. It spreads like water, but fills a little faster than some. Has a pleasant odor, and that odor does not persist. After some weeks it is said to be foodsafe. Tage Frid used it. If I was going to put some wet glasses on it I would probably use Maloof, though I suspect cutting it so that it was 33% flecto varathane would achieve the same thing.

Re: Pssst! Wanna see spme pretty cherry?

#55

Re: Nice ! Thanks James...

James Watriss

>Yeah, Cherry's not a very porous wood, so it's not really needed for that reason... it's more to provide a way for the color to come to the surface.

That picture looks funny to me now, the chest has really darkened up nicely.


img

Re: Pssst! Wanna see spme pretty cherry?

#56

Very Nice !

Scott Burr in Ben Lomond, CA

>Good looking chest there. I like the inlay.