18th century rivets, pics anyone?
Alan DuBoff
>Speaking of split-nuts, prior to the use of split-nuts, saw makers used rivets. Most all the pics I've seen of old saws, looking like they have some type of split-nut, but I think I might have some of the rivets possibly on one or two saws.
Did most of the makers file the rivets flat also? I have some saws that don't appear to have any split and/or way to tighten them, the maker appears to have done that purposely by filing both sides flat. I do have some that have rounded heads on them, but newer saws around the turn of the 20th century, and as such have slotted screws on them.
Is the two flats with no slot, a rivet? And for extra credit, how were the rivets swagged together? Did the makers use some type of tool? Were they just hammered together tight?
The Kenyon saws also appear to have flat, and I would guess those are most certainly rivets since they were made around the turn of the 19th century.
Saw screws do have an interesting history, with Washburn's patent in 1867 for brassing the screw shank to the head, Munger's patent in 1869 for swaging the shank to the screw head, and Glover's 1887 patenet for swaging the shank to the head of a label screw and stamping the head with logo/mark.
I suspect the saws I mention above are what the rivets look like? No split, just both flat faces on both sides?
Presumably MikeW will put split-nuts on copies of the Kenyon dovetail saw that resurrected at WIA. This will be the new holy grail of dovetail saws...:-) I wouldn't mind understanding the saw, hope Mike gets to disassemble it. Interesting that it is close to the Grammercy dovetail saw. Joel did his homework on that one. :-)