Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Favorite shooting plane?

Posts

Re: Favorite shooting plane?

#26

Re: This works really well

HC Sakman @ Victoria, BC

>The one in the picture can handle 1-3/4" thick stock easy, 2" thick depending on type of wood.

Chico...

Re: Favorite shooting plane?

#27

Well if you really want Ugly

John Edwards

>Langdon Miter Trimmer.

4" left and right skewed iron. Plane rides on it`s own track.

Turrent is adjustable to any angle. Set stops at common angles.


img

Re: Favorite shooting plane?

#28

Re: Well if you really want Ugly Part 2

John Edwards

>Ugly from a different angle


img

Re: Favorite shooting plane?

#29

Steve Kubien

That settles it. You suck!!!

Steve Kubien

>

Re: Favorite shooting plane?

#30

P51 Mustang?

Denis Ch�nard, Orl�ans, Ont.

>

Re: Favorite shooting plane?

#31

Re: That settles it. You suck!!!

John Edwards

>Ahh, Geez Steve if you must that way 8>)

Thanks

Re: Favorite shooting plane?

#32

Re: Well if you really want Ugly

Dave Thompson

>Hi John, That looks so clean but I don't recognize it.... is that a contemporary miter sold today, or did you just find one in good shape?

First one looks great too... is that a St James Bay Tool Spiers miter?

Re: Favorite shooting plane?

#33

Re: unless...

Dave Thompson

>That's a beauty Paul. I'm not quite sure how that can be improved upon. Thanks for sharing.

What's up with that disrespected Witherby and Japanese chisel in the background??? ;-)

Re: Favorite shooting plane?

#34

Re: Well if you really want Ugly

Frank D. in Montreal

>Boy,

Things are getting worse with every post John!

Since you were such a good sport about my snide comments, I'll say that those are some very droolworthy tools you have there! I didn't even know that skewed mitres with 2 mouths existed! Still wouldn't mind knowing who made the first miter you showed (i.e. Dave Thomson's question: is it from a kit?...).

Thanks for showing...kind of...

Re: Favorite shooting plane?

#35

Hmm.. interesting idea

Dave Thompson

>Hey Bill, Now that's thinking outside of the box. Trying to imagine a techinque for setting that, I suppose one might lie the plane on it's side, extend the blade out far and then hold a square up to it and adjust the lateral adjustor for square.

Is that how you do it?

Thanks for sharing,

Dave

Re: Favorite shooting plane?

#36

Re: LN 62

Dave Thompson

>Just like everything else in the world companies are trying to sell you a different product for each operation we perform. Stanley was no different and thats why they created the #9 as opposed to suggesting you use a #5 or another one of their planes

Yep, Sure makes good business sense. I'd do it if I ran Stanley ;-)

Re: Favorite shooting plane?

#37

Re: This works really well

Dave Thompson

>Wheh, an Oliver trimmer? And I thought a #51/52 might be the ultimate contender.

Nice find.

Re: Favorite shooting plane?

#38

Groan...knew it was coming before posting ;-)

Dave Thompson

>

Re: Favorite shooting plane?

#39

Enough pics of the quadrant...

Bob Hackett(Mainely,Bob)

>"De plane,De plane boss"

How`s that for asking nicely?.

MB

Re: Favorite shooting plane?

#40

You're right, that's really gross

Bill Houghton, cold and rainy in Sebastopol, CA

>I specialize in de-contaminating ugly tools like that. Ping me offline and I'll send you my address - you can ship the tool to me and never have to see it again.

Re: Favorite shooting plane?

#41

I use something similar - a morso foot guillotine. *LINK*

Andrew F in Australia

>Hi Chico,

I use a Jyden guillotine, similar to a Morso foot powered mitre guillotine as detailed in the attached link- also cuts square ends on up to 5" wide, about 4" capacity on a 45 degree mitre.

Step on the foot pedal, the head of the machine comes down with a direct attachment and you can guess the rest.

THis is the picture framers' tool - fast, accurate and dead straight cuts. I use it for cleaning up cuts off the saw and for the non-standard compound angles (such as chair side rails)

Purchase was cheap second hand (AUD300) - new price here is about AUD4000/USD3000.

If you come across one of these second hand, don't discount it - sharp blades are suspended in midair, so it needs a bit of care, similar to the Lion trimmer and variants. Well worth a couple of hundred more than a new Lion variant.

Dollar for dollar, it far outweighs the Lion trimmer - that's why framing shops use them.

Weightwise too, it's very heavy - mine is a light model and probably weighs about 80kg/200# or thereabouts.

Cheers,

Andrew


http://www.pictureframingequipment.com/Morso%202_0

Re: Favorite shooting plane?

#42

Re: Lion Cutters and such...

paul womack

>I have seen them[mitre trimmer] shave a pretty fine cut.

I have an old British made one.

The action is "interesting", especially if you're used to planes.

Since there's no mouth, the shaving thickness is set by the projection of the stock; it would be very difficult (IMHO) to get a shhaving beloew a hundredth, which is chunky by plane standards.

However, since this is an end grain cut, tear out is NOT an issue. And trimmer are the ULTIMATE low angle device. They have zero bedding angle, and zero clearance. The effective cutting angle is the blade bevel angle, around 20-25 degrees. Eat that, bevel-up-plane fans!

The result is a glassy surface.

However, for shooting accurately to length as well as angle, I prefer shooting boards, since one can creep up to a knifed line one thin plane shaving at a time. It's not especially hard to LEAVE the "witness mark" of the knifed line.

BugBear

Re: Favorite shooting plane?

#43

Re: a novel solution!

paul womack

>How do you come up with all these clever ideas?

I read a lot. Most of the ideas I talk of were not created by me. Some of them do come from reference works old enough and/or obscure enough that they aren't widely known.

As far as I know, the only idea I've ever come close to originating is this:

gadgety work holding

I don't know if this idea pre-existed, but if it did, mine was a case of parallel invention, not duplication.

BugBear

Re: Favorite shooting plane?

#44

Dave and Frank

John Edwards

>Thanks for the kind words.

The Langdon dates back to the turn of the Century era. Was pretty crusty but a bit of tlc bought her back to life.

The Miter plane is a one off made by Bob Baker of Maine. 10 1/2 x 2 1/4 or so. Desert Iron Wood infill.

Re: Favorite shooting plane?

#45

empirical

bill tindall

>When using a Bailey type plane (none of mine are square) I nibble, check end for squarness, adjust, then repeat until all is well, or good enough. It seems a small price to pay to be able to use a cheap plane for this task. This is not a lengthy process to get to an end.

I adjust about everything empirically.

Re: Favorite shooting plane?

#46

Re: empirical

Pam Niedermayer - Austin, TX

>Then why not simply square up the plane's body? Your way, you kind of always have to cut things a bit long in case the fiddling takes off more than you'd want, which means you always have to fiddle and cut. No?

Pam

Re: Favorite shooting plane?

#47

Steve Kubien

Re: That settles it. You suck!!!

Steve Kubien

>Ah c'mon John, you gotta know I don't really mean it....too much. In all seriousness, that is a mighty fine looking set up. Being somewhat new to this old-tools-vintage-iron-really-snazzy-gizmo world, I've never seen one of those. Can we see a few pics of the plane itself? Also, a question... Is there a concern with 'wear' in such a set up? I mean, iron plane + iron runway = wear or am I just trying to think of a good reason not to hunt for one of those?

Cheers,

Steve Kubien

Re: Favorite shooting plane?

#48

Finding excuses....

HC Sakman @ Victoria, BC

>I think your imagination is running wild Steve. Mind over matter...mind over matter.... keep repeating this to yourself and you'll be safe..... 'til the next "ugly" thing comes along.

;-)

Chico...

Re: Favorite shooting plane?

#49

True up a metal plane?

Dave Thompson - Champaign IL

>Maybe I'm not being very imaginative, but how does one do that? The first thing that comes to mind is a purchase of metal working equipment that would cost me as much as a half dozen LN#9's.

Oh wait, I see, this is a setup for you to plug the virtues of one of your woodies ... isn't it? ;-)

Re: Favorite shooting plane?

#50

Re: True up a metal plane?

Pam Niedermayer - Austin, TX

>No, not at all, but if you can flatten a sole you should be able to flatten a side. Right?

Pam