Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Lignum Vitae lawn bowls

Posts

Lignum Vitae lawn bowls

#1

Lignum Vitae lawn bowls

I have been given two Lignum Vitae lawn bowls. Their value lies in the wood, as modern versions are made of henselite. What I would like to do is cut them up into sections, and use these to build mallet heads. I imagine that the density of the wood will enable the (rectangular) mallet heads to be smaller for the same weight. 


 

The issue I have is how to safely saw a round ball on a bandsaw? My thought is to use a hot glue gun to attach to a board, and run this through the saw blade. I am being cautious here - any advice or suggestions welcomed.


 

Regards from Perth

Derek


Re: Lignum Vitae lawn bowls

#2

Re: Lignum Vitae lawn bowls

Hi Derek,  I am not an expert but have done a fair amount of bandsaw work.  It would be helpful to know the size of the lawn bowls since we Yanks are not familiar with the term. .

My first thought would be to make a hole in a flat board into which the work-piece could be hot glued and therefore stabilized, then sliced in the manner you need.  If that idea is of no use please disregard.  Phil


Re: Lignum Vitae lawn bowls

#4

Peter Martin

Re: Lignum Vitae lawn bowls

Hmmm... $3148 per ball?

https://www.1stdibs.com/furniture/more-furniture-collectibles/collectibles-curiosities/sports-equipment-memorabilia/lignum-vitae-bowling-ball-rack/id-f_410782/


Re: Lignum Vitae lawn bowls

#5

Re: Lignum Vitae lawn bowls

Drilling a large diameter hole on a scrap for a carrier ought to do it. The biggest danger is right at the start, but only if you come in too fast and especially if using a rip blade with some hook angle to the blade. Also think about grain orientation. I would think that vertical grain would be best for ease of cut in that really dense wood. 


Re: Lignum Vitae lawn bowls

#6

Wow......if they are that valuable......

no way I'm going to cut them up......I'd, at the least, find a place to display them as conversation starters.......that's some expensive wood......


Re: Lignum Vitae lawn bowls

#7

Re: Lignum Vitae lawn bowls

There is a company near me that specializes in Lignum Vitae.  They search the world for it and have quite a stash.  They have no such thing as a scrap, down to the sawdust.  they clean up around the equipment when they saw and then collect all the sawdust and sell it to the cosmetics industry.  I asked them if they had a scrap they would give me or sell me they just laughed.  So you might want to consider selling what you have.

If I were to cut it I would make a board the wide of the diameter of the ball and drill something like a three inch hole near one end and hot glue the ball into it and then clamp two sides on tightly and then slice the end off.  Once you get a flat side it will be easier.  If this makes me sound over cautious and slightly afraid, you are correct.

I might also mount this on the lathe and turn it down to a hammer head and use that.  Or you could turn it to a mallet shape.


 


Re: Lignum Vitae lawn bowls

#8

Special for Roger and WC members …

… only $450 per plane hammer.

WAIT, THERE’S MORE!! 

For each hammer you buy, I will throw in FREE, yes FREE sawdust!!!


 

Peter, your link was to bowling (alley) balls. LAWN bowling balls are offered on eBay for around $50 (AUD) each. Here is one eBay auction (in the UK):  


 

https://www.ebay.com.au/itm/SET-OF-2-CLARES-OF-LIVERPOOL-LAQUERED-LIGNUM-VITAE-CROWN-GREEN-BOWLS-SIZE-2-6/155422327940?hash=item242fe48484:g:Kd8AAOSwolhj9jmD&amdata=enc:AQAHAAAAoFn8O/D/bgj+6AEHax7V018YaJrOwgmt28xuFxXlC46gtcUx5CVAmls/UPrMuv/ojuFV7TeZdRhG/vFYVr055pCKskbNEctVub2JljcMd8SdkWi6TEp258jE6Bxeo+Tk0JJLw7gisx2LBTgc+cz+Teoqho4GYP98A01mGITBh2XepgdY6MEt2+9C/097YcNSf6cVe6Crw9fwGaTvBRmYrXE=%7Ctkp:Bk9SR8Cx5-DQYQ&pageci=2b3ec587-3257-4ad4-99e2-bc97c2d96fb4&redirect=mobile


 

Peter, I suspect that the bowling balls you linked to are being auctioned for their rarity value.

Regards from Perth

Derek


 


 


Re: Lignum Vitae lawn bowls

#9

Derek.....thanks for the clarification.......

"lawn bowls" are not very well known in these parts.......might be the first I've heard of them.......


Re: Lignum Vitae lawn bowls

#10

Re: Lignum Vitae lawn bowls

All "lignum vitae" is not the same. True lignum vitae (Guaiacum officinale or Guaiacum sanctum) is almost unobtainable, except in antique form, due to the usual suspects (habitat destruction, over harvesting, etc.).

https://www.wood-database.com/lignum-vitae/

Most "lignum" wood currently for sale is Argentine lignum vitae or verawood (Bulnesia arborea, or Bulnesia sarmientoi, etc.). It is more readily available, the trees tend to be larger and straighter, and it is less expensive.

https://www.wood-database.com/verawood/

For other differences in the physical properties, refer to the Wood Database links. 


Re: Lignum Vitae lawn bowls

#11

Ellis Walentine

Geez, and to think that ...

... back in the 70s, when I was buying my exotics direct from the importer's warehouse on the docks in Brooklyn, they had big piles of lignum vitae, some as big as 8x12x24 blocks destined for pillow blocks for oceangoing propellor shafts. Occasionally, after I had loaded up with Brazilian rosewood or English oak or satinwood or tulipwood, the warehouse manager would throw in a barrelful of lignum chunks, boxwood log ends and other goodies in appreciation for my business. It never crossed my mind that this stuff would appreciate so much in value, but now I wish I had thought more of wood as an investment. Hindsight is 20/20.

By the way, if you've never turned lignum vitae, you're in for a treat. The shavings come off in perfect ribbons the consistency of butter. Never heard of the dust being used in cosmetics.

Ellis


Re: Lignum Vitae lawn bowls

#12

Re: Geez, and to think that ...

Ellis, you have experienced part of the Golden Age. You're a lucky guy.

Thanks for sharing.


Re: Lignum Vitae lawn bowls

#13

Re: Lignum Vitae lawn bowls

I was always wanted to ask people that do mallets out of lignum: don't you guys think lignum a little bit too precious to make something like a mallet? It's not harvested anymore, maybe something a bit more interesting, idk, a speciality plane or something like that? 


Re: Lignum Vitae lawn bowls

#14

Re: Geez, and to think that ...

 Had the pillow blocks replaced on the ship I was working on in 77, at the Alabama Drydock Co.

To the best of my recollection the wood cost about $20K .


Re: Lignum Vitae lawn bowls

#15

Rafael from PA

Re: Lignum Vitae lawn bowls

I'd clamp the ball using two boards horizontally so that the ball could be run through the band saw, if grasped vertically the band saw would be trapped. Once a flat side is formed, the other cuts are easier.

I've a block of what I've been told is LV. It's about 4"x10"x24". It's not going to end up as a mallet since I already have one. I've been thinking plane soles, knife handles? chisel handles? ideas?

Rafael


Re: Lignum Vitae lawn bowls

#16

Retirement fund.......

at these prices.......better than stocks or bonds...


Re: Lignum Vitae lawn bowls

#17

Re: Lignum Vitae lawn bowls

3 ways jump to mind:


 

Sidle up to the disc sander and make a 2 inch flat on the downside.  Freehand it.  If you cut a lot of bowl blanks that will seem pretty routine.  Sell dust on ebay.


 

Take a large forstner bit, and make a pocket in a piece of scrap.  Epoxy lawn bowl into hole, possibly fillet more epoxy around it.  But as if it were a square.


 

Make two pocket, in two pieces, put them on edge around the blade, use clamps to center and capture the ball, and saw away.


 

Of course, if a handsaw would dent it, I would freehand it.  That is how I did this project with my daughter.  It is some kind of cell.  We didn't have any time, or materials, though we had wood.  So I turned the ball, then freehanded the cuts.  What you see is off the saw. The little internal ball was also freehanded, but it is foam. I think the main piece is poplar.  There is a flat on the bottom, but otherwise it is a pretty good sphere of about 5 inches.


Re: Lignum Vitae lawn bowls

#18

Re: I used to sell lawn bowls

40 years or so ago, I worked in a sports store, that sold water skiing and tennis on the main floor and outdoor gear upstairs.  But we also sold lawn bowls for our distinguished elder patrons.  While I was there, the company came out with a zero size lawn bowl, previously the smallest size was a 1.  There was a device for measuring hands, and people were to hold the bowls with the tips of their fingers in tiny divots, in bands around the bowls.  This promotes a cleaner release. Or at least that was the idea.  Almost all my clients had arthritis, so holding a heavy ball by the tips of their fingers was not going to work for them.  They all wanted the O ball when they came out, because they were lighter.  We did good business that summer, and the clients always paid with cash.

Later, my cousin married a lawn bowler, whom I believe currently captains the UK bowling team, not completely sure, and they spend a lot of time in Australia.  I believe he is headed back this summer.  He has always been a bowler, and the team puts a rather more youthful spin on a lawn bowl.

The game is somewhat like curling, and the bowls come in different biases (or did in the 80s), this mean one side has more weight than the other so one can curve one's shots.  Is there anything behind that medallion like a cavity, or weights?

My main attraction to bowling is that the field looks like a magnificent place to play association croquet.  :)  The mallets have become very sophisticated, employing carbon fiber, milled aluminum, etc...


Re: Lignum Vitae lawn bowls

#19

Re: Lignum Vitae lawn bowls

Derek, I believe a safe way would be to make a crude wooden box and trap the ball into it so that it touches at the obvious tangent points and then screw it in there with substantial crews. Then make one cut  safely on a band saw, obviously staying away from the screws. Once you have one flat, unscrew it and you're safe to go for the rest of it.


Re: Lignum Vitae lawn bowls

#20

Re: Lignum Vitae lawn bowls

It would be even safer NOT to cut all the way through on the first pass. Perhaps cut about one inch less deep than the center, rotate 90 degrees keeping the same side of the box against the fence, make a similar cut, do this four times. This procedure will leave a small (2x2 in.) square connecting the two parts of the sphere inside the box.Then cut that last 2x2 on the band saw or even by hand. I was a little worried about the part of the sphere (that has only one screw) spinning and wobbling at the last second and binding up the blade. Also, it occurs to me that after this cut is all the through, you may want to leave the five screws alone in one part of the box and safely make whatever cuts you need. The other piece has a nice big flat, so it should be safe to cut up with the flat part down on the band saw platform. Even then, when I do this kind of thing, I hold the work piece with a big Jorgenen wooden hand screw clamp.


Re: Lignum Vitae lawn bowls

#21

Re: Lignum Vitae lawn bowls

So, have you cut them up yet? You must see that my suggestion for doing so is the best one ever!


Re: Lignum Vitae lawn bowls

#22

Re: Lignum Vitae lawn bowls

Of course your ideas were the best, Eliot! :)


 

But, no, not cut yet … hopefully this weekend. My nephew Luke is dropping in from a galaxy far far away with his light sabre. If that does not work, it will be the bandsaw and a boxed up and screwed and glued lawn bowling board.


 

Regards from Perth

Derek


Re: Lignum Vitae lawn bowls

#23

Re: Derek.....thanks for the clarification.......

I think that in the US we call them Bocci balls. A game where the balls are rolled on a lawn. 


Re: Lignum Vitae lawn bowls

#24

Re: Lignum Vitae lawn bowls

I'm with you. Sell it and then buy a good selection of woods with the money it brought in.


Re: Lignum Vitae lawn bowls

#25

Re: Derek.....thanks for the clarification.......

Different game.  Bocce is Italian, and very popular.  Bowls is somewhat different.