Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Close call

Posts

Re: Close call

#26

Why no auto-start for me

John K Jordan

Everything I read indicates the motor is stressed more starting than running and can even overheat if started and restarted repeatedly. In addition, the current draw on a cyclone is less when the blast gates are all closed and the impeller is in a partial vacuum, not moving air. This is a 5 hp ClearVue cyclone - I might think differently about a different collector.

When working, I often turn off a machine to change something then turn it back on after a short time. I might cycle the bandsaw multiple times then move to the drum sander or a vacuum hose for cleanup. Between these I leave the cyclone running and just close the blast gate.

I use a wireless remote to control the cyclone and keep a keyfob transmitter handy at the major work areas.

If my cyclone were in the open shop I might be more tempted to turn it off just because of the screaming sound level. However, I house the cyclone and big compressor in a sound-insulated closet and it's quiet.

JKJ

Re: Close call

#27

Re: Close call

John McGaw

Yeah. Capacitors of all sorts are susceptible to all sorts of failures and they can sometimes be spectacular. While working on the late shift at the AFRTS station on Okinawa I heard what sounded like a pistol shot. Later, after I signed the station off in the wee hours I went out into the big studio to make sure everything was as it should be and found that the side panel on one of the three huge TK-31 cameras was hanging open and a paper streamer seemed to be draped from the side. It turned out that an AC capacitor in the 'orbiter' (threw that term in for any ancient TV people in the audience) had exploded blowing the door open leaving an oval dent from the inside of the aluminum side door and shooting the cap's steel case across the studio until it hit a set wall maybe 20 feet away and leaving a spiral of oil-soaked paper and foil behind it. No fire or anything but the violence was a real revelation. The case on that camera was really thick and the dent was quite pronounced.

Re: Close call

#28

Re: Close call

Bill Turpin in WNC mountains

Do not just fear the compressor and dust collector. Almost any stationary motor, without brushes, and with the metal hump has a capacitor. THIS INCLUDES MOST TABLE SAWS and some lathes and bench grinders. I have seen motors with two start caps and two run caps. They look like a double dromedary camel!

Re: Close call

#29

Re: Close call

Michael Wilkins

I have that same dust collector and the capacitor failed about 5-6 years ago. Luckily there was no fire; just the motor shutting down before getting to full speed. I am glad you avoided another big fire.

Re: Close call

#30

Wow, better check mine!

Tony Leonard

I have the same model. I have made a note to check it. I have had mine for around 18 years with no issues thus far. Thanks for the heads up!

Tony

Re: Close call

#31

Re: Close call

Tony Leonard

Thanks for the heads up and glad it wasn't any worse. Please let us know what you find. I took a look at mine and it looks very different. It really doesn't look like a cap at all. It has a rubbery cover on it with no markings that I could see at a glance and has a potting material on the bottom. I think mine was purchased around 1998 or 9? Not sure.

Tony

Re: Close call

#32

Ellis Walentine

Obsolete

Ellis Walentine

eReplacement parts doesn't sell that capacitor. Apparently, Delta no longer supports that machine. I did find out that it is a "run" capacitor, though, 30µF, 250VAC. My motor repair guy is trying to find a replacement that fits into the little cover on the motor. Meanwhile, I have my shop vac hooked up to the planer for small jobs, and I'm taking major planing jobs over to a friend's shop. You don't miss your water 'til your well runs dry.

Ellis

Re: Close call

#33

Re: Close call

Joanne in Point Pleasant, PA

Wow. That's scary. So glad you caught that in time to put out the danger. The only experience I ever had with a blown capacitor was in a flat screen tv. No fire or smoke, thankfully. Just no image. I actually took it apart myself and fixed it. Added "soldering on electrical components" to my resume'.