Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Top of the world to you!

Posts

Top of the world to you!

#1

Top of the world to you!

Derek Cohen (in Perth, Australia)

Well, my wife is partly Irish, and we are getting close to completing her Lingerie Chest.

My last post completed the drawers, and now attention is turned to the top of the chest ...


This was a saga. I built and rejected three tops before settling on the one below. There were a variety of mouldings, and none fitted in, even the subtle ones. In the end it was a case of less is more. Book matched Makore (as with the carcase) ...


As seen here, the panel is reinforced by breadboard ends. The breadboards line up with the side frames.

So here is the completed carcase. I apologise for the inaccurate colour - it should be a little more red. New camera and still trying to sort out the lighting. To enhance the details I blocked the background. Trying to learn to take better photographs!


Here's the obligatory dovetail picture, which most have seen already. The bowed drawers (figured Jarrah) are difficult to judge in this photo, but the curves will show up in the top shortly ..


So, let's see what happens when we lift the top ...


The chest is just 48" high, and the mirror allows it to double as a dressing bureau. This will be covered in dark blue leather.


The hinges for the top are heavy-duty Brusso butt hinges that have a built-in stop at 95 degrees. Holding up the top and mirror is not a problem - my concern was to ensure the lid did not fall down! I searched for months for a suitable brass stay, but could not find one anywhere. The problem was that it needed to fit into a narrow space, and all the ones I looked at needed more room than I had. In the end I designed and built my own.


A brass bits-and-pieces, reshaped, fitted together ...


The stay and catch are french fit into the top. There is a finger hole to access the head, then swing it over and into the catch. It works really well.


And one last photo. Apologies for the gruesome person in the background :)


I am now working on the last part of the Lingerie Chest: sliding jewellery trays in the top drawer.

Regards from Perth

Derek

Re: Top of the world to you!

#2

Ellis Walentine

May I assume, sir,...

Ellis Walentine

...that you are getting a lot of points for this little project? :)

Derek, it's beautiful. The lid stay is brilliant, the wood is gorgeous, and your documentation is over the top, no pun intended. Thanks so much for the inspiring post, and here's hoping she likes it. :)

Ellis

Re: Top of the world to you!

#3

Wow!

Tony - Memphis

Just wow!

Re: Top of the world to you!

#4

Re: Top of the world to you!

Gary Smyth

Exceptional work. Kudos for the unique top hardware.

Re: Top of the world to you!

#5

Re: May I assume, sir,...

Ray Newman

Agree with Ellis' comments. Fine craftsmanship and design!

Re: Top of the world to you!

#6

Re: May I assume, sir,...

John K Jordan

Amazing!

Re: Top of the world to you!

#7

Nice!


Re: Top of the world to you!

#8

Re: Top of the world to you!

Jim Dillon

Beautiful chest of drawers and I echo what others have said about the brass lid-stay. Wonderfully thought out! Jim

Re: Top of the world to you!

#9

If my wife every finds out . . .

don stephan

about all the treasures you've made for wifey, . . . :(

Always rewarding to read your posts.

Re: Top of the world to you!

#10

VERY nice,  Derek


Re: Top of the world to you!

#11

Re: Top of the world to you!

Matt Robinette

Very nice I can appreciate the patience needed while working with the wood chosen to build the cabinet That wood has some wild grain.

Re: Top of the world to you!

#12

Alan Young

Simply Fascinating

Alan Young

The subtle details are superb. I am curious about the use of Makore. I have only used that species once-and at that- only one board that I ripped twice-and it smelled like skunk puke! I can't imagine building anything with that species in spite of it's visual appeal. Excellent work.

Re: Top of the world to you!

#13

Smell

David Yoho

I'm wondering how you know what skunk puke smells like!! ;)

Perhaps a skunk did puke on your Makore before you got it. I cut quite a bit of it last year and this year and there was no bad smell from it.

Re: Top of the world to you!

#14

Makore

Derek Cohen (in Perth, Australia)

Hi Alan

No smell that I can ascertain. Makore is a really nice timber with which to work. Although the boards I have are figured, it handplanes well and chisels cleanly. In texture and chatoyance it reminds me much of Tasmanian Blackwood/Koa. I am used to working West Australian woods, such as the Jarrah drawer fronts, and these are very interlocked, hard and brittle.

The downside of Makore is that it is abrasive (contains high levels of silica). I am used to that, however. I sat on the stash I used for about 3 years because I had read many stories of how allergenic it is. I bumped up my dust collection and purchased a better face mask. As it turned out, the wood has not appeared to affect me.

Regards from Perth

Derek

Re: Top of the world to you!

#15

Re: Allergies

Mark Mandell - Gone Round In New Jersey

Derek,

Some woods, walnut for instance, can be sensitizers over time; the more you're exposed to them, the worse the toxicity. Be mindful of that the next time to work that species so you don't get surprised by a reaction.

A very fine piece. (but you already knew that, eh?)

Re: Top of the world to you!

#16

Alan Young

I'm not going to tell you!

Alan Young

Heh heh- Well You and Derek seem to have had no issues. - I bought the board at the local Woodcraft outlet-It was labeled Makore- but maybe it was a different species and was mislabeled?...I can only say it was the most putrid smell I had experienced since our children were under 2 .....

Re: Top of the world to you!

#17

Re: Allergies

John in NM

Everywhere I've worked, I've been allergic to something - first job after college it was the Palo Santo tree (Mexico) then later on it was mesquite dust, then Emory oak pollen, then miller moths.

I finally concluded that the sensitization was to work itself!

Re: Top of the world to you!

#18

Re: Top of the world to you!

Joanne in Point Pleasant, PA

Gorgeous! Beautiful! Wish I were there to see it in person! I KNOW your wife will love it and you for making such a beautiful chest! Thanks for sharing all the details. Love those dovetails!

Re: Top of the world to you!

#19

Re: Work Allergy

Mark Mandell - Gone Round In New Jersey

It is, after all, the curse of the drinking class.

Re: Top of the world to you!

#20

Spectacular!