Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

31 Aug 2015

Good Morning/Evening Everyone,

Nothing for me to report on as I've been working the day job and oncall duty. I'm stuck here in the office right now working critical issues. I'll keep this short and sweet this week. :)

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

Kevin French

We I sat down the morning with my coffee checking out some of the sites I follow and on the Wooden Canoe site I clicked on the Classifieds to find -18' Prescott wood/canvas canoe "FREE" Western Mass after a call to confirm it was still available I call my canoe partner in crime (SWMBO was at work) and declared a "Road Trip"

Prescott Boat Company was in business from 1941-52 in Brewer Maine. I haven't found any thing else about the company but it's a great looking hull and with a little cleaning and a good sanding it will be ready for canvas.

 photo P1220440.jpg

 photo P1220441.jpg

My Lab did the final inspection and said it was a Keep'ah

Re: WC Weekend Accomplishments....

#3

Auction for Woodcentral Benefit Kick Ass #4

Matt Robinette

Hello my fellow woodworkers I have decided to cull the smoother plane till I have accumulated the past few years. I will be offering for your perusal a # 4 Bailey with fine but smaller tote and handle it is a fine fettle plane with a Hock blade and chip breaker. It goes without saying that the Hock blade and chip breaker is beyond reproach to fellow blade makers of today. It is a plane that is without competition sure you might fancy a Bedrock but the price for a simple adjustment that is seconds on Bailey is it really worth it. Hell No this blade and chip breaker negate the advances of the Bedrock. If one to slip and let the blade fall between legs while stropping it could split the the family twig and berries. To the ladies I digress. With proper care and mouth attention it will provide many years of excellent wood smoothing and full width shavings, I must confess that the only reason that this fine plane is coming up for benefit auction is because of my attendance of the local Cumberland Furniture Guild hosting of the Lie Nielson demonstration, further being bewitched by Deneb and his demonstration of the Lie Nielson line of tools I was powerless and bought a #4 and high angle frog. Didn"t the area that Lie Nielsen is at have all those witch happinings so long ago? So one of the smoothers has to go and since the bronze of the Lie Nielson has me hypnotized it is to the benefit of Woodcentral this fine plane becomes available. Woodcentral and Badgerpond before it when I was A Normite if that isn't a term it should be have been the fabric that bonds woodworkers and I hope that with this modest benefit it helps to pay for server fees. Proper pictures will follow as I have a hard time reducing the pic size on my phone to fit the under 100k size needed to post. If this plane fails to bring anything near what is worth let the buyer know that it has been refined to the standards professed in the books by Chris Schwarz,and the Editors at Popular Woodworking. But I must admit that I have neglected other teachings such as Graham Blackburn AKA English Bob who's thoughts of American made planes are inferior and only English infill planes are proper for smoothing of wood surfaces. I believe from my limited experience that a properly sharpened and proper adjusted Bailey will provide the results desired while smoothing wooden work. I believe in the fabric and continuance of Woodcentral that I will pay for shipping within the US 3 day USPS so all that is needed is a check to Ellis. I must also thank Ellis as many others would have moved on to more profitable endeavors.

Re: WC Weekend Accomplishments....

#4

Ellis Walentine

A gentleman and a scholar

Ellis Walentine

Matt, thanks so much for this generous donation. When you get your pics together, I suggest you post this plane on our Benefit Auctions board. Be sure to note the closing date and time of your auction.

Cheers, and thanks again...

Ellis

Re: WC Weekend Accomplishments....

#5

spruced up our bar and used some scraps

Grant in Iowa

LOML and I spent Saturday afternoon and a few hours Sunday improving the look of our bar. We took inspiration for the use of wood scraps from a pizza joint in Atlanta called Max's. Their version was oriented with the boards vertical, whereas we chose to place them horizontally.

Originally, the back of the bar (really more of a kitchenette, since we aren't big drinkers) was just drywall painted white. The cabinets are low cost red alder units we ordered when we built the house.

We wanted to add some shelves and doll it up a bit, so we sorted through the scrap in the shop. My wife was in charge of aesthetics, while I was in charge of production. Sure, logistics conflicted with the "art department" a couple of times, but we ended up with a nice product. We are pretty proud of it and the look warms up the space quite a bit.

The aesthetics department would like me to add some under cabinet lighting to finish it off. Scratch one project and add another to the list.

Regards,

Grant in Iowa


Re: WC Weekend Accomplishments....

#6

Jim in Burlington Ont.

Re: WC Weekend Accomplishments....

Jim in River Oaks, Ont.

Spent part of the weekend organizing my annual Pen Production Run for my Christmas shows, looks like 125 new pens to add to my current inventory, Going mostly wood this year, lets see how that goes!

Take care, Jim

Re: WC Weekend Accomplishments....

#7

Oh My Achin'

Mark Mandell - Gone Round In New Jersey

thighs!

A month ago a bud called for help getting his old house ready to market after he finally got the tenant out. Place was trashed, holes in the wall, broken this or that, and all the carpeting had to be ripped out and the floors redone; pretty much a full gut job.

So after the floors were refinished I got handed the job of putting in shoe molding on the entire 2nd floor. Set the chop saw and compressor up in the hall and 50 16' lengths of stock later 5 bedrooms, an office, and the hall are all trimmed out ready for the painters. Thigh muscles are like toothaches! Think I'm gettin' a bit old for this . . . . :( ;)

Re: WC Weekend Accomplishments....

#8

First lathe lesson

John K Jordan

New to lathe, 1st lesson. I started him with the skew chisel planing spindles, then v-grooves, then graduated to spindle gouge for coves and beads. He's ready to come back for more!




JKJ

Re: WC Weekend Accomplishments....

#9

Oh, and built a saw

John K Jordan

I needed a small coping saw to help with some carving on a bowl. I made this to use 5" spiral and straight blades (0.015" thick).

Bent and heli-arc welded 1/4" steel rod to 3/8" rod, machined, drilled & tapped, glued on a turned handle. It is so handy to have metal-working in the new shop!


JKJ

Re: WC Weekend Accomplishments....

#10

Re: Oh My Achin'

AZ in Colorado Springs

Cleaned and tuned the machines and did some sharpening. The TS blade was off parallel by just a smidgen, but what a difference a good alignment and waxing the tabletop makes.

Re: WC Weekend Accomplishments....

#11

Re: Oh, and built a saw

Brian Roberts

Very nice!

I can't believe I went without access to a metal shop for years....had no desire actually.

Now that I've gotten a taste of what I can do in a well equipped metal shop I can't imagine being without!

Re: WC Weekend Accomplishments....

#12

Re: Oh, and built a saw

Rum

May I be the first to compliment you on your lovely fillets?

Someday someone will be trying to figure out who made that saw :D

Re: WC Weekend Accomplishments....

#13

Re: Oh, and built a saw

John K Jordan

This was actually the first time I used that machine for more than a practice bead. As my heli-arc skills are sadly not yet suitably stabilized, those are Finely Filed Fillets.

This saw is partially patterned after one I saw in a friend's shop on Friday but with the benefit of a milling machine and a handle originally made for a rider's crop instead of from duct tape. I did brazenly steal his idea of mounting the hex key in the handle. This one fits into a hole drilled into the end.

JKJ

Re: WC Weekend Accomplishments....

#14

finished up a cabinet

Thomas S Stockton

I finished up a claro walnut cabinet. The claro veneer I resawed my self, the panels are crotch and the top is quarter sawn. The stringing on the doors and top is abalone. I had a great time building it.

Tom

Re: WC Weekend Accomplishments....

#15

Re: finished up a cabinet

Hank Knight

Wow! That's a beauty, Tom.

Re: WC Weekend Accomplishments....

#16

Re: finished up a cabinet

Bill Tindall, E.Tn.

Always nice to see your pieces. It would be a nice addition to the WoodCentral Gallery to post a few there.

Re: WC Weekend Accomplishments....

#17

Re: finished up a cabinet

mdclor

Tom, your work is always most impressive. Thanks for sharing.

Re: WC Weekend Accomplishments....

#18

Re: finished up a cabinet

Joe in a Cleveland suburb

That's beautiful! Great work.

Re: WC Weekend Accomplishments....

#19

Re: finished up a cabinet

Jesse Cloud

Awesome!

Tell us about abalone. What form does it come in from your source (sheets, strips, shells)? How do you cut it?

Thanks!

Re: WC Weekend Accomplishments....

#20

Delicious Work

David Yoho

Tom, as always, a very nice job. I enjoy your work and always am inspired.

Re: WC Weekend Accomplishments....

#21

Re: spruced up our bar and used some scraps

Barry L Elder

Grant, you and your clearly superior Aesthetics Dept. did an AWESOME job!

Re: WC Weekend Accomplishments....

#22

Re: finished up a cabinet

Barry L Elder

That is a GREAT job. I crave claro walnut!

Re: WC Weekend Accomplishments....

#23

Re: finished up a cabinet

Thomas S Stockton

Thanks for the great responses

The abalone comes precut in strips about 4 1/2" long and 1/16" wide so it is pretty easy to work with I cut the strips with a exacto razor saw and the file or sand the ends square. It is not that difficult to work but can get expensive.

I get my shell from www.rescuepearl.com great people to work with and some of the best prices around.

Tom

Re: WC Weekend Accomplishments....

#24

Beautiful work!

Mark Hennebury

Subtle lines and powerful grain patterns, A gorgeous piece of work!

Mark hennebury

Re: WC Weekend Accomplishments....

#25

Re: finished up a cabinet

Joanne in Point Pleasant

Jaw-droppingly gorgeous, as usual, Tom! Thanks for sharing!