Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

OT: Pressure Washer

Posts

OT: Pressure Washer

#1

OT: Pressure Washer

Joanne in Point Pleasant

Looking for opinions on pressure washers. My little cheapie Karcher is leaking like a son of a gun and there is no pressure. Most reviews say not to bother with another unit like the one I have. I figured it was time to step up and buy a bigger and better unit. But I read the reviews of the various models at the big box stores with either Honda or Briggs & Stratton engines and they don't get the best reviews either. They may be good engines, but the AAA pumps are crap, or the hose, or the way the nozzles attach, or where the gas tank is, or the size of the tank--various complaints. Anyone have anything good to say about any of them?

Re: OT: Pressure Washer

#2

leaking where?

John in NM

I've had several of those disposable Karchers and always kept a supply of o-rings for replacing the one on the high pressure hose where it screws in. They wear out quickly if you remove the hose often. I also used to put a little grease on them after tearing the first one, that helped a lot but also holds dust.

Of course, if the pump housing is cracked, I could see it leaking there too :D

For anything heavier than these little machines, I would recommend renting one instead. Unless you need daily access to it, the reliable ones are simply too expensive IMHO.

Re: OT: Pressure Washer

#3

Re: leaking where?

Joanne in Point Pleasant

Thanks. No--not leaking at the hoses. Much. It is definitely leaking underneath somewhere.

Re: OT: Pressure Washer

#4

Re: leaking where?

TomD

I have a cheap one. The first one I ever tried to use was my neighbour's industrial one and it leaked profusely where the bronze pump housing had cracked. I think it is worth upgrading the small ones beause whatever the reliability ratio fo small to large, the large ones will do stuff like strip wood, the small ones don't work fast enough before the whole tri-state is soaked. Still useful to have though.

What I would do is either build one from parts or buy one that is laid out where when one component fails you can just buy and bolt on the replacement. Many places sell the pumps and connectors, and motors. That way the next one you buy will be your last, but the parts replacement may go on for ever.

Re: OT: Pressure Washer

#5

Re: OT: Pressure Washer

Bill Tindall, E.Tn.

go to Northern Tool, or mail order, and get anything with a blue pump (CAT).

Re: OT: Pressure Washer

#6

Re: "Build one from parts"

Joanne in Point Pleasant, PA

Thanks, Tom. Interesting idea, but not quite in my skill set. I do try to challenge myself to do things I've never done before, but I think even I have limits there. I have been trying to find something with quality parts that are replaceable.

Re: OT: Pressure Washer

#7

Some thoughts and a recommended vendor *LINK*

Grant in Iowa

Joanne,

pressure washers require proper winterizing and layup procedures. There are winterizing kits you can get that essentially allow you to fill the pump with RV antifreeze, or special pump antifreeze. I tend to keep mine in a heated space, and actually use it year round when weather here in Iowa permits. Therefore I don't winterize mine.

Most of the units available at major retailers are not among the best quality available. They usually have good motors and pumps that are a compromise. Pretty much the same approach as they have with mowers (good motor, poor transmission).

If you are serious, and are willing to lay out some cash for a quality unit that will last indefinitely and be supported by a multi-generation business, see the link below. They are great folks to ask questions of as well. Their low end units are better than most of what the big box stores have. And, if they ever give you grief (they won't), I'll drive over and slap them for you :)

Have a look at the electric ones, as that can make sense for many needs. Best bet is to tell them what your usage needs are and let them recommend a unit.

FWIW,

Grant in Iowa


Sprayland

Re: OT: Pressure Washer

#8

Re: OT: Pressure Washer

Joanne in Point Pleasant, PA

Thanks for the good input, guys. Renting might have been an option, but the thought of hauling one home when I need it--I nixed that idea. Tom suggested I build one from parts--a little beyond my skill set. Grant's recommendation of units at Sprayland--very nice looking washers, but way beyond my budget. After reading reviews (both pro and con) in many places, I followed Bill's advice and looked on Northern Tool. I bought the best reviewed one I could afford. It was on sale AND I found a keycode online for another $50 off the price. Free shipping, no tax and a 2 year warranty. I can deal with that. Thanks Bill!

Re: OT: Pressure Washer

#9

That's why I shop at Northern Tool

Bill Tindall, E.Tn.

And if you have a farm number, there is not tax

Re: OT: Pressure Washer

#10

Re: That's why I shop at Northern Tool

Joanne in Point Pleasant, PA

Didn't need a farm number to be tax exempt. I guess they do not have nexus in PA.

Now I need to shop for a tractor/lawn mower. I think I need to take over that job from the guys who have been cutting it and doing only a fair job.

Re: OT: Pressure Washer

#11

Re: That's why I shop at Northern Tool

Jerry Roberts

I wish I had listened to advice I had as to not buying a pressure washer. I just had to have one from Costco so I got it at a pretty good price, I THINK I used it 3 times and I didn't notice the high pressure hose got wrapped around he exaust muffler. It melted a pretty good hole in it and it shot water ill bet 100 feet. I haven't been able to fix it yet.

Re: OT: Pressure Washer

#12

Re: That's why I shop at Northern Tool

Allan Wessel

Check with a automotive or truck supply store for repair fittings for hydraulic hoses. You should be able to find either a union that you can use to fix the hose.

Re: OT: Pressure Washer

#13

Re: That's why I shop at Northern Tool

walta

I have never owned a pressure washer.

How do you get the water out before it freezes in the winter?

Walta

Re: OT: Pressure Washer

#14

freezing

Jerry Gibbs

for the small electric washers, you don't. Prepare to store the washer where it can't freeze. I don't know about the larger gasoline washers.

Re: OT: Pressure Washer

#15

Re: That's why I shop at Northern Tool

Cameron Hood

To winterize, instead of using water, grab a gallon of RV antifreeze and use it. Even if there is antifreeze in the pressure washer, it won't freeze up and break anything.