Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Finally a fence to the router cabinet

Posts

Finally a fence to the router cabinet

#1

Finally a fence to the router cabinet

Stephen Kirk

It seems like I put this off for too long and just kept clamping a board to the cabinet. Sure that works, but it's kind of a pain to adjust, doesn't support taller workpieces, etc. So I knocked out this nice little fence over the weekend. It's all pretty standard stuff. Slides on t-track mounted on the table, adjustable faces and the top track for mounting other accessories. I've always found a good fence on a router table to be nearly indispensable - they can do so much.


Re: Finally a fence to the router cabinet

#2

And the back

Stephen Kirk


Re: Finally a fence to the router cabinet

#3

Re: And the back

roger lance

Congratulations on your fence.....looks very good.....are you planning to add dust control/vacuum to the back ??

Re: Finally a fence to the router cabinet

#4

Re: And the back

Joanne in Point Pleasant, PA

Nice job!

Re: Finally a fence to the router cabinet

#5

Re: Finally a fence to the router cabinet

Dick Coers

That's a beaut! My only suggestion would be to back chamfer those sliding faces. It's easier to send them into a spinning cutter if you need zero clearance on the infeed.

Re: Finally a fence to the router cabinet

#6

Re: And the back

don stephan

From personal experience, I'd suggest whacking back the long bolts, so that things "temporarily" put behind the fence are easier to place and extract.

Re: Finally a fence to the router cabinet

#7

Re: And the back

Stephen Kirk

Yeah, I definitely intend to do that. Or next time I'm out get shorter t bolts. They are a knuckle hazard too.

Re: Finally a fence to the router cabinet

#8

Re: Finally a fence to the router cabinet

Stephen Kirk

That's a good idea. I did that on my previous fence ( on an older table ). I also should put a slight bevel on the bottoms of the fences to make chips less of a problem.