Good question. I don't know. I had made some assumptions, but I can't back them up with any facts, so they're not worth a thing. I found some good photos of the single phase motor for the new saw, but the labeling only says Delta. I can't assume Delta built them in house. I don't know enough about parts details of the motors built by the manufacturers you name, so the photos don't help the identification. The next time I run into the guy who I know who comes closest to an expert on the subject, I'll ask him.
Roger, for as long as I can remember my father has never been impressed with Black & Decker at all. I think that most of their stuff labeled B&D is probably home owner grade. A couple years ago I did however pick up a used B&D 2720 Industrial router that looks pretty promising. And come to think of it, just about all, if not all of the yellow colored DeWalt hand power tools that I bought quite a few years ago were made in the USA. They probably aren't made USA anymore either, like everything else is getting to be.
Chuck.....I'm not able to properly comment on the quality of the yellow Dewalt tools as I've not owned any. But, many others have reviewed these tools and seem well satisfied with their performance and I assume that they are good functional tools of a better grade than standard B&D products.
The very first significant tool I ever purchased was a Dewalt radial arm saw that my dad had me buy to use to build my house and make our own roof trusses.....the RAS made all those angle cuts. This saw was a contractor grade saw and bears the Black and Decker name as B&D had just acquired Dewalt. So this is why I'm somewhat familiar with what happened to Dewalt.....I was an interested by-stander. These tools were progressively cheapened and their quality reduced until there was no market for them.
I know that other tools appeared like the power miter box that contractors turned to which also added to the loss of market share for RASs. However, I'm sure you are aware that there remains a small percentage of woodworkers who still like and use a RAS and the old Dewalts are still prized if you are lucky enough to find one.
The comment above about tool retailers saying that we will have to wait and see what happens was in regard to B&D acquiring Delta given what had happened to Dewalt RASs. I do not know specifically what B&D did with/to Delta.....just that they held it for awhile and then sold them.
There appears to be some products common to both companies to this day. Both Dewalt (B&D) and Delta offer a scroll saw that appears to be the same product except for the paint.
In the early 1970s, Delta manufactured the Penncraft machines for department store chain J. C. Penney. I recently had this saw and regretfully sold it last year. It was in great condition.
Thanks for the link to the writeup William. It doesn't really tell me much more then what I was thinking is going on. I did notice the comment that while Delta will continue to try to help locate parts for out-of-production machines, those supplies must eventually dwindle. The company is committed to supplying parts for machines currently available for purchase. I looked up just the cabinet for the older Contractor's table saw and was shocked to see that it is around $250. They have always been proud of their parts. There are ALOT of older machines out there, older parts shouldn't be a problem for quite awhile on the internet. I will add though, that if I was looking to buy a new Cabinet saw, and price wasn't a concern, and if I knew that the company is going to be around for quite awhile, the Delta Unisaw would be my choice.
They aren't making much of a commitment. For years some parts for brand new machines have been nonexistent. Reads like a fluff article about a company that advertises with them. I don't read that magazine, or the ezine. Just not much to read in my opinion, and this article reinforces my feelings.