Will Delta Machinery bounce back ?
ChuckinND
I have my thoughts, what are yours ?
Knowledge You Can Build On — Est. 1998
Will Delta Machinery bounce back ?
ChuckinND
I have my thoughts, what are yours ?
Not with current owner
Dick Coers
I guess it may depend on what generation of the past Delta you think they might return to. Rockwell days? Industrial machinery? Deltagram days? I'd just be happy with parts and customer support. Since I stopped buying from them from poor support on a 46-460 lathe, I really can't say how they are currently doing.
Re: Will Delta Machinery bounce back ?
roger lance
I have a shop full of Delta machines (and Porter-Cable) and it saddens me to say that I doubt Delta will return to its past glory. The fall of this once dominate company has been ongoing for years and has had a number of steps and stages which would require many different positive moves to restore this product line. The thinking.....the values....the attitudes required to make this transition may belong to a bygone era.
If I were outfitting a shop today, I guess I'd be looking at PowerMatic/Jet...SawStop....and some others....but Delta would not be a first choice.....unless you wanted to buy my older Delta stuff that is.
Re: Will Delta Machinery bounce back ?
Ron Pemberton
Back in the days of New Yankee Workshop and Norm Abram, Delta and Porter Cable were the gold standard that young inspiring woodworkers had dreams about owning. Sad to see tools such as Delta going down the tubes.
Exactly so.....
roger lance
Ron.....My dad was a carpenter and I remember our fascination with watching the early This Old House shows where they were actually showing a carpenter (Norm Abram) working at his trade.
When The New Yankee Workshop came on, I naturally followed along and took a cue as to which brand of tool to get. There was also a passage in The Workshop Book (I believe) that referred to Delta tools as the Ford/Chevy of woodworking tools.....that is; every hardware/tool store in America had Delta or Delta parts and knew how to service Delta products.
When I went to a local retail store that serviced the building trades, they literally had dedicated a very long wall in their showroom to Porter-Cable tools.....just about everything PC made was on display. Now, they maybe only sell a couple of PC products which they don't really push.
Sad but true.
Re: Will Delta Machinery bounce back ?
BrianMonumentCO
Who or what is Delta PEC?
Not just the acronym please but reality.
The answer to whether Delta and PC will return has to do with who is running the show and what their attitude is.
Re: Will Delta Machinery bounce back ?
BrianMonumentCO
Previous post asked who they are.....
Chang type machinery.... But same question who and what they are.
Are they entangled with other companies in the same area?
And above all how much leadership/interference will they impart on the American workers.
Another thought about the bounce back
Dick Coers
Ellis and I (and others of course) were invited to Delta Headquarters in Pittsburgh in the late 90s. It was a show and tell, and product discussion about new equipment to woodworking magazine editors. Even then, they were worried about the diminishing sales of serious hobby woodworking equipment. They could see the decline of numbers due to baby boomers all having a unisaw. The machinery lasted so long, that sooner of latter, people would be able to take over Grandpa's machines and new sales may have reached the peak. It could be that there are not the sales needed to keep all the machinery companies solvent. Not near the number of young folks entering the hobby. It's very interesting reading about all the business that the baby boomers drove in this country. Looks like nursing homes, funeral homes, and cancer clinics are on the climb right now. Woodworking, not so much.
Re: Another thought about the bounce back
Matthew Robinette Mt Juliet Tn
Share holder returns forced the decision makers to sell the company and diversify. It is not a bad thing because others have filled the void . Yes I lament the loss of American manufacturing but we now have Saw Stop and others who produce their machines overseas and deliver at price points that folks find affordable. The various small businesses that make hand tools have managed to keep most of the manufacturing within the countries where they are based.But if they become large enough and offer their stock for public offering all bets are off because most investors are looking for returns and have no dog in the fight as to where it is made or by who. Capitalism ya gotta love it, to a point.
Re: Another thought about the bounce back
TomD
Dick, that is what I have been expecting to happen to many of my hobbie "investments", not to mention real estate. Can you elaborate on what is happening, any industry type trade numbers. You mention young people aren't coming into these hobbie, which I assumed to be true, any numbers we know about that.
--------------------------------------------------------------------------------------------------------------------
Sometimes people talk about offshoring production, another part of that is population growth. If you constantly grow gross population from offshore sources, the mix of hobbies may not be the same, which is fine, but it is part of the deal.
---------------------------------------------------------------------------------------------------------------------
All that speaks to the fact that if you want Delta quality check out online auction and classified sites, now is the golden age for anyone wanting to get in.
Re: Another thought about the bounce back
Dick Coers
I don't have any numbers Tom, just based on the two clubs I belong to. The woodworking club had to discontinue the senior discount, the majority was eligible for the discount. Average age at those meetings has to be over 60. Turning club is nearly the same way. A lot of white hair, if there is hair at all. No 20 year olds in either club.
got a new unisaw 2 years ago; Nice!
Ronster
Our tendency in judging machinery quality is to wax nostalgic because of our average age -- old -- and largely because you bought machinery that you are content with today. That doesn't infer that new is bad; particularly if your remarks are based on presumption rather than experience. Dick is right; demographics is driving things. The kids want machines of a different type (touch screens and social media buttons), and they did not take shop or drafting in H.S., and dad did not ask them to saw a board once. So why should companies make a big effort to make machines without big revenues? It's our fault just as much if not more than Delta's.
Re: got a new unisaw 2 years ago; Nice!
ChuckinND
Ronster, let me tell ya a little story. Up here in the Dakotas there is a business that use to manufacture skidstear loaders. They were union until they got sold out to a company in Taiwan. Now they are nolonger union, and nolonger manufacture parts in this town, they only assemble parts at much less wages, $13 an hour. Are you going to blame those blue collar workers for not being able to afford what they use to ? Trust me, those are not the only blue collar workers that are lagging behind in this country. Blaming the consumer is misguided. Delta chose a path, and now they may not survive the trip. The trouble of availability of parts to it's existing customers was a HUGE mistake, having everything made out of this country is another. There is noway that they are going to compete with Grizzly when it comes to cheap imports, not that Delta would pass those savings along. Don't get me wrong, I'm not a big fan of Grizzly, Harbor Freight, or ToolShop at Menards, I don't buy junk. In a nut shell, Delta isn't what is use to be, and neither is this country. I've been mostly a blue collar worker all my life, and I'd rather support American jobs. My last purchase this summer was a new Kalamazoo belt sander. It wasn't a huge purchase, but I'm proud to own the machine.
He's not blaming anyone really...
John in NM
By "blame" I suppose he meant that the changing tastes of the younger demographics is the root of the problem. I don't think he's saying its the workers' fault or the consumers' fault per se. The kids want ipads mostly, not table saws, not shiny bronze planes.
Sure, Delta or your skidstear company could have stayed domestic, stayed union, stayed high wage. Maybe they would survive doing that, a few do. Most likely they would have gone under like so many do.
If anything, I think Ron's point was that our pop culture does not encourage kids to get into trades any more, like it did when you were a kid, or even (just barely
) when I was.
gotta disagree!
Ronster
First, my new unisaw is more American made than anything else available I believe. That's purposeful on my part and on Delta's. They, like me, tried harder than most, in the face of tough overseas competition and the lack of continued customer support for American made. Unfortunately for them, they made great tools that last a life time. Unfortunately for them and us, woodworking as a hobby has been in decline (my primary earlier point). Unfortunately for them, they can't operate profitably without changing -- something it is hard to blame them for when a great many U.S.-based businesses have been forced to reorganize or fold up for exactly the same reasons.
Second, I missed the part where I might have been blaming US workers for not being able to afford something. If you want to help there, next time you're voting look deeply for candidates who thinks our income tax system should be thrown out and replaced. Better equity is going to take a long time to achieve. Here I will blame US citizens in general, including blue collar. Regardless of party affiliations, we're pretty uneducated about the important stuff, and we're too self-absorbed to think long-run. But we cannot discuss that here without broaching the rules -- a good thing.
oops; didn't see John's comment
Re: gotta disagree!
ChuckinND
I'm not sure that your Unisaw is Made in the USA, assembled in the USA with imported parts maybe. And sure it's a lifetime machine, unless your incredibly brutal with it. It's an industrial saw in a less used hobby shop. I get the less interest of the younger generation, can't blame them there, even I'm losing interest, and I had a passion for it for many years, including dust collection improvements. I guess what I don't understand is that we have a group of people who take pride in their work in this country, basically anti import furniture people that don't see a problem with imported gimmicky junk machinery, eventually all thats it's good for is filling up landfills. I don't see anything out there now that I'd sell the Contractor's table saw that I have had since 94. I don't need an over powered industrial and stationary table saw in my mostly hobby shop / garage that we park our vehicles in. SawStop, don't even get me started on that.
Foggy remembrance of Delta's decline.....
roger lance
As I mentioned above, I bought my Delta equipment during the early years of The New Yankee Workshop which were golden years for Delta. Now, I'm trying to recall events that I became aware of after buying that signaled a possible downfall of Delta and, by no means, is this an all inclusive recollection.
First, there was a change of ownership.....seems the company was sold more than once. I remember people in the tool stores saying that "well, we will just have to see how things will go".
Then, there was a decision made by new owners to centralize Delta's warehouse and distribution operations. I recall that there was some huge warehouse facility built and then a period of closing the usual distribution sites and items then being shipped to this new facility. This may be the step that doomed Delta. I clearly remember talking with various retailers who were becoming very angry with Delta as they were not able to get product from Delta as this massive new warehouse was in total disorganization. No one knew were anything was. Retailers were having to disappoint customers over and over.....telling them that their product would be there next month.....and then next month, telling a customer to be patient that it would be another month.....etc.....etc. So retailers started to not sell Delta at all.....could not rely on the company.....better to sell something else and keep customers happy and spending.
This mess continued on and on.....I remember at some point, after years, that a trailer was opened that had been left sitting at this new warehouse and there were 6 brand new DJ-15 jointers found.....and this was years after Delta quite making/offering this tool.
I can remember trying to buy accessories for my Delta lathe that were in the current year catalog and these items were discontinued. Some new owner had decided to discontinue many many Delta parts, Delta accessories, Delta tools.....and just blow off customers and take away product support which is vital if you want to keep your customer base.
I remember looking at a thread on another forum where someone had asked for recommendations of a good 14 inch bandsaw.....I certainly expected the Delta saw to be recommended as it was always considered to be the "gold standard" of 14 inch saws....it was the saw all others were based on.....to my surprise, Delta was not even mentioned. That told the tale.
Just some thoughts I have....YMMV....you must have other experiences....post away.
Delta
Ivan Warrington
I made a decision some 20 years ago to go with Jet. My first tool was a Jet table saw. I was impressed with Jet quality that all my tools are Jet. I can buy any part I needed since then. The only part I ever needed was the base to my drill press (broke it moving). Sadly, today they are just sitting unused. I seemed to just lose interest. I am still happy that I invested in Jesada router bits, they are still the best.
Re: Foggy remembrance of Delta's decline.....
ChuckinND
If I remember correctly Pentair had it for awhile, then Stanley, Black and Decker had it for a short while until it was in 2011 when Delta was bought out by Chang Type, then things went south. We have a ACME Electric ( Tool Crib of the north ) up here and I remember that they nolonger had Delta machines on the sales floor. When I asked a salesman about it, I was told that the new owners requested the machines, accessories, and even the parts in the parts department to be returned to the company. Now I see that ACME is back to selling some Delta machines and accessories. Not sure if they are stocking parts. I had a discussion with a guy about a week ago that said that he has a Delta dust collector that was a fairly new model and the capacitor went out. Delta nolonger stocked the part and he had to buy one through Grainger. It doesn't fit inside the capacitor cover, so now it's taped to the side of the motor.
Re: gotta disagree!
William Duffield
No, it is really made in the USA! The only reason for the caveat on the place of origin is because Delta decided they could not manufacture all their commodity UNC nuts, washers and bolts themselves in house, and their suppliers dumped all the basic hardware from THEIR suppliers in the same bucket, so they couldn't guarantee to Delta, and Delta in turn couldn't guarantee to us, that 100% of it was made in the USA. Every bit and piece of their Unisaw that you can't buy in a bubble pack at you local Borg (and a vast majority of the parts that you can) is made in the USA.
Re: Foggy remembrance of Delta's decline.....
William Duffield
My recollection is that parts and service "went south" during Stanley/B&D's watch, not after Delta was sold to the Taiwanese.
Re: gotta disagree!
ChuckinND
William, I'm guessing that it has a Marathon, Lesson, or Baldor motor then.
Re: Foggy remembrance of Delta's decline.....
ChuckinND
William, thats possible, my memory is foggy also. If so it surprises me that Black and Decker would of messed up a good thing. Look at where they are with DeWalt now. If I'm not mistakin DeWalt has always been Black and Deckers industrial line.
A somewhat different take.....
roger lance
IMO, Black and Decker took over Dewalt when they were THE maker of radial arm saws and then proceeded to run that business into oblivion. Other factors were at play, I'm sure.....but B&D played a major role.
IMO, B&D ownership can be a death sentence for a company. What is now Dewalt bears little to no resemblance to the original company beyond the name.