Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Wooden Jewelry?

Posts

Wooden Jewelry?

#1

Wooden Jewelry?

Keith Newton

My young assistant has a couple of friends planning to marry, that have ask him to make wooden wedding rings for them. He was asking my advice. Well, obviously the easiest thing would to turn a ring with the grain running with the finger, but it would all be short-grain, and very easy to break.

Even if the grain were perpendicular to the finger, half would still be very short-grainedand fragile.

So, we were discussing doing some really small finger joints, on a 45º, or 60º, then turn it like a segmented bowl.

Then maybe steam bend some strips spiraling around a pipe / mandrel, followed by cutting a long scarf joints diagonally across the face, hoping to be able to pull the sides across to glue together.

And finally to wind venee?rs around a mandrel, building upon itself, but this would be a pretty tight bend for that.

Do any of you have any experience doing this, and willing to share your technique

Re: Wooden Jewelry?

#2

Re: Wooden Jewelry?

William Duffield

I would build plywood from veneer, bonded with epoxy, and reinforced internally with two plies of carbon fiber tow. Then, drill a hole in the middle to fit the finger. I can't imagine any other structure which would be both strong enough and also constructible at that scale.

Re: Wooden Jewelry?

#3

You are trying to make it even more difficult.

Keith Newton

One is size 8 and the other 10. By plywood, I hope you mean multiple plys running around the ring, which will be difficult enough. But trying to lay in carbon fiber, which I do have, but keeping it toward the inside layer, then getting a good clean cut and finish gives me pause. Some of these new tough fibers are really tough to get a really clean cut on without some fuzz, not to mention how the black line would look.

Re: Wooden Jewelry?

#4

Re: You are trying to make it even more difficult.

William Duffield

Well, no, I wasn't thinking a bent lamination, but that might work even better structurally, but would definitely be more difficult to build than what I was thinking. I would try to lay the layers out flat. You could make a prototype from a couple layers of aircraft ply, and then choose dark woods that would hide the carbon. You might get by without the carbon tow, or even use fiberglas fiber, but I think carbon would add significantly to the durability, and wedding rings (like marriages) can be subject to a lot of stresses.

Re: Wooden Jewelry?

#5

Re: You are trying to make it even more difficult.

TomD

I would set my hand plane so it takes a saving that does not curl, because often the curl means it was broken all along the outside of the bend. Then I would glue it up, and wrap it tightly around a mandrel.

Re: Wooden Jewelry?

#6

Re: Wooden Jewelry?

roger lance

Keith.....I'd make two suggestions and you've already done the first which is to post this on the Turning board. I'd also suggest that you go to Lumberjocks and do a search for wood rings.....that's a project that has been done over there often.

Re: Wooden Jewelry?

#7

You should have been to our last WW club meeting

Bill Tindall, E.Tn.

We have a short demo before the program. Jeff Neil took a thick plane shaving off the edge of a board. Wrapped it around a mandrel of appropriate size, slathered it with cyanoacrylate glue and produced a ring. Sanding and shaping refinement followed. They were quite attractive.

Re: Wooden Jewelry?

#8

Contrarian viewpoint...

John E. in SC

Understand, I love making things out of wood. But in my mind, despite that, wood isn't the best medium for every creation. I think wedding rings would be pretty high at the top of the list where I would NOT use wood. Ornamental rings / jewelry - no problem. You wear it off and on, and if it breaks, no major deal. Wedding rings are (should be) worn every day, hopefully for decades, and have lots of sentiment attached. I can't see any way a wooden ring would last decades with that kind of wear and tear. If cost is the issue, there are lots of inexpensive choices, but I don't think wood is the way to go here. Perhaps a little guidance to the couple from someone familiar with working wood is in order.

Re: Wooden Jewelry?

#9

Re: You should have been to our last WW club meeti

Larry in NW Ohio

Keith I hope when you finish the rings, that you post pictures. Larry

Re: Wooden Jewelry?

#10

Resin impregnated?

Tony - Memphis

Wonder if some of that resin impregnated stuff would work?

Tony

Re: Wooden Jewelry?

#11

terry gearhart

Re: Wooden Jewelry?

terry gearhart

Take a look at the web site bangleguy.com this may help

Re: Wooden Jewelry?

#12

I'm with you

Bill Howatt

If there is some special sentiment associated with wood they could be used in the ceremony then displayed or whatever. For daily use unless very carefully handled they won't last years. Of course, these days it's hard to say if that is inadequate time.

I'd be looking at some hard exotic for the wood or perhaps an impregnated blank rather than a domestic wood.

Bill

Re: Wooden Jewelry?

#13

Compwood, or cold-bend *LINK*

Dick Coers

Pretty pricey stuff, even the sample pack. Would make bending easy. Sample pack link is puretimber shown below. Compwood is a different product, must be really close to the same technology, but I didn't read the details.

http://www.compwood-products.com/index.php?mm=technology

Also Google Gustav Reyes for bentwood jewelry. His contemporary styles may not appeal to everyone though. I love the look!

http://gustavreyes.com


http://www.puretimber.com/small-orders-and-samples/

Re: Wooden Jewelry?

#14

WOW, Thanks everyone for the great links.

Keith Newton

I'm finding plenty of things to inspire trying new things.

Ben and I have set aside Wednesday evenings to experiment with new ideas, purely for fun, the artistic pursuit or learning something new.

Re: Wooden Jewelry?

#15

Re: Wooden Jewelry?

John in NM

The most durable way I've seen it done is a silver channel forming the ring with a wood band inside the channel. That way the silver takes most of the stress of use.

Resin impregnated wood is probably the best way to go without adding metals to the mix. I would drill a blank the right size and make a mandrel to hold it while turning.

All that said, I'm in the no wood jewelry camp. Jewelry just tends to be too small to show wood's beauty, so I usually find wood jewelry to be underwhelming. But to each their own :D

Re: Wooden Jewelry?

#16

Ellis Walentine

Anything is possible, but

Ellis Walentine

...metal is your best bet. I made our wedding rings out of ivory, 36 years ago, because the gold ones we had ordered weren't going to be ready in time for our wedding day. They got us through the ceremony, but mine broke on the way to the hotel that night and Candy retired hers the same day. The axiom here is, anything breakable is going to break, especially anything that has short grain.

So how do you make it unbreakable? If you think about the structural requirement of a wedding ring, it needs to be crush proof within limits. No matter what you do, you won't be able to sit down hard on your hand (to dream up a semi-plausible example), but gold rings have limits, too. Laminations that go all the way around the ring with long grain would be the only way I'd trust to be possibly strong enough, and even then, you'd have to come up with a section profile that is strong enough based on the wood you're using. And to make that tight bend, you'd need to start with very thin -- think hand plane -- shavings. Maybe take a heavy pass with a plane, then soak the pieces in epoxy, then clamp them with masking tape around a waxed, slightly tapered mandrel. Shape the final ring on a jam chuck on the lathe.

Interesting question.

Ellis

Re: Wooden Jewelry?

#17

Total Alternative...

Barry Irby

I made a bunch of wooden rings when I was in high school and gave them away to the ladies. I would be astounded if any of them still exist. (the rings, not the ladies.)

My son had a wedding band made of the same thing Carborundum is made of. Silicon Carbide? It was beautiful and nearly black. They explain that in the event of an accident, it basically could not be cut. They would have to break it to get it off. Very nearly scratch proof.

Re: Wooden Jewelry?

#18

Re: Anything is possible, but

TomD

I think that ones made as I suggested would last a good long while. Anyone see the bent ones not even laminated that go up and down a mast all the time? Leather is pretty fancy, normally just wood on wood.


Second point is that made as I suggested, they could be refreshed, like those "600 year old" wooden temples in japan.

Third, Wedding rings are made of softer gold than engagement rings, so that the wear will take the wedding ring first. Nice sentiment, but when it comes to that engagement ring, it doesn't seem to mater as much. Eventually the wedding ring get's built up.

Four, more romantic stuff is based on impermanence than permanence. That is why we give women roses, or flowers. They don't (in traditional conceptualization) want the Hotley plane that can be handed down for generations, a power fantasy. They understand that the valuable, beautiful things are living and perishable. So if you want to hive off of those life giving ideas like "diamonds are forever", why not.

Five, I made some earings from ebay parts. I bought some diamonds for 350, and a setting for 110, and they were nicer than the earing of the same size that Costco sells. You can get gold wedding rings for very little money.

Six, what is with all this rings stuff? Is that typical in the US. To be honest it seems to be in Canada too. But none of my UK or Canadian relatives or people I knew through school wore male wedding rings. Traditionally we weren't owned. Now that nobody is, we still cling to these odd traditions. Head scarves are controversial, some jurisdictions have banned them, yet we get married in burkas. The Burkas are white, another thing that lacks permanence past the first night, if that...

Seve, if you make the rings as suggested, using epoxy, they will be impregnated.

Re: Wooden Jewelry?

#19

Re: Wooden Jewelry?

Charlie belden

Turn The rings out of wood, preferably an open grained wood. Use the wooden rings to cast metal versions. If you put a little soft wax on the bottom of the wood ring pattern, and have him press his fingerprint into the wax on her band - and visa versa - it will be in the cast metal piece, as will the open grain of the wood.

I did a half dozen pairs of wedding rings this way backing my jewelry making days