Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Question for stock makers

Posts

Question for stock makers

#1

Question for stock makers

Joe shelton

Getting more excited about the confluence of interests in woodworking and shotgunning. This means modifying stocks of guns to fit me so I can kill them pesky clays.

At issue is making and installing shims between the receiver and the stock to induce or to support cast and drop, so the shim is a compound bevel.

I've read that yellow birch is highly shock resistant, so I'm thinking of using it in one case where the shim will be confined in a recess of the receiver, not showing. Any comments on yellow birch?

Re: Question for stock makers

#2

Re: Question for stock makers

Bill Tindall, E.Tn.

I don't know anything about doing the modifications but I have worked a lot of different kinds of wood for various applications. I question the information on birch. If it was so shock resistant would it not be found in baseball bats and ax handles? I think that any hardwood would work just fine for the shims, including the traditional stock woods of walnut and maple.

Re: Question for stock makers

#3

Re: Question for stock makers

2b6

I'd use a wood that is diffused porous rather than ring porous. Maple, birch, cherry not oak, walnut, or ash. Early wood cells would tend to crush easier. After a round of clays you may find your gun pointing in a different direction. :\

Try Lexan.

Re: Question for stock makers

#4

think this through

Bill Tindall, E.Tn.

If the recoil impact crushed the wood what would become of the shooters shoulder?

Re: Question for stock makers

#5

Re: Question for stock makers

Basil

Can't help you with what wood to use but you are right to get the stock to fit you. My great uncle introduced me to skeet and trap shooting 50 years ago. He had a large assortment of guns and gauges to shoot. Out of all the guns he had, only one, a Remington 12 ga. pump, fit me and it made all the difference in the world.

Re: Question for stock makers

#7

Re: Question for stock makers

BrianMonumentCO

Joe,

I am a gunsmith.

I went to Trinidad State Junior College. Marvelous program.

When adjusting the orientation of the buttstock with relation to the receiver of the shotgun,

some of things we need to know are

1. how does your stock bolt stay accessible, ie not have to be redrilled.

2. Is the shim actually able to maintain FULL contact between the stock and the receiver

FULL contact is vital otherwise the stock could split where single point contact happens.

3. how are you going to keep the wedge from shifting in position as used.

4. we normally modify the buttstock directly if the stockbolt is accessible.

5. The best way to provide proper fit is to make a custom buttstock

a. to achieve proper heel drop

b. to get the right cast left/right.

6. if you must go the route of the shim, any wood solid enough wood would need to laid with grain perpendicular to the grain of the buttstock. Gaps could/should be filled in with epoxy.

Most important to remember is that the buttstock MUST make complete contact with the receiver.

On choice of materials, Benelli has a set of plastic wedges that do some angle adjustment.

But it is not enough and the main problem is that the angle desired makes the stock bolt not accessible.

Re: Question for stock makers

#8

Re: think this through

Tom

It isn't always pretty, if Youtube is any guide. The recoil on some guns is pretty fierce in the range of being shot by a 22.

The difference on the forward part of the stock is that it is smaller in diameter, usually pretty heavily inlet, so there is minimal material there. The recoil moves the receiver back, and the load hits the stock which is incompressible. When the recoil impulse reaches the butt, the butt is often soft, and the shoulder is soft, and there is a complex series of rotations that come into play.

Re: Question for stock makers

#9

Don't over think it

Joe shelton

If it weren't for tender body parts, I wouldn't be making adjustments. And Brian makes very good points below about pressure points and stock damage. What he didn't say is that, between one shell and the next, changes can be bad enough to get both painful and expensive.

DAMHIKT.

Re: Question for stock makers

#10

Re: Question for stock makers

Joe shelton

Hey, Brian, I understand your points, and agree with them. The gun I have in mind now is a Rem 1100, so the shim I use to insert cast and drop will be entirely or almost entirely inside the back end of the receiver. I'll keep the stock attachment and action tube from being impinged by relieving the thru-bore lightly, and I'll fabricate a replacement washer with an offset hole. That way, when I put it back together, the action tube stays straight, the stock doesn't bear against the stock, and the stock is fully engaged and supported at the front and back.

Re: Question for stock makers

#11

Re: Question for stock makers

roger lance

Why not ask actual stock makers like Boyds or Manners ??

Re: Question for stock makers

#12

I'm with Bill...

John in NM

Sure, use yellow birch if it makes you feel better to do so. The scientifically minded amongst us should perhaps just chuckle at the notion that any other hardwood would not do just as well, chuckle and go on about our productive day :D

Personally, I would use anything harder than white pine and just get on with it :D

If crushing of fiber is the concern, I would be looking at plastic shims myself - they are more homogenous than wood.

Re: Question for stock makers

#13

That's a no brainer......

Bill Tindall, E.Tn.

.....the recoil of a 300 Mag is like being shot by a 300 MAG. The recoil of anything is like being shot by it for the mass times acceleration (force) of the projectile is equal to the mass times the acceleration(force) of the gun striking the shoulder, unless there is a muzzle brake. (It is why people, and deer, don't in fact go flying backwards when shot while the shooter stays erect. )

And, it will be noted, that walnut is adequate for handling this force in any sporting rifle or shotgun. Depending on where one lives finding yellow birch could be a difficult task.

Compressive strength parallel to grain in kPa:

Brich 56,000

Walnut 52000

Hickory 63000

Re: Question for stock makers

#14

Re: Question for stock makers

Tom

Lots of stocks are made out of Birch.

Re: Question for stock makers

#15

Re: That's a no brainer..  perhaps in one sense

Tom

Not true as far as I know. The energy of say an elephant gun bullet at the muzzle if you are hit by the bullet, and it expended all of it's energy in you (unlikely if you are not an elephant, is 4000 footpounds and up. The recoil is in the 100 and up foot pounds range. This is because the bullet weighs, say 500/7000 pounds and is moving at 2600 fps, while the rifle weighs, say 11 pounds and is moving at whatever the math says that works out to, but a low number of fps. Since velocity is a second order effect, and mass a first order, only, the effect on energy of 2600 fps second is significant.

As far as the effect on a body at the terminus is concerned, bullets are designed to destroy the target, not move it. So on big game there is a trade off between penetration and the destructiveness of the wound channel. To have assurance the bullet will be effective, it has to be designed to survive for the maximum penetration required from the worst angle, and the worst impact against target elements. But at the same time, ideally, it will be as destructive as possible along the way, and waste no energy outside the target. On average you are looking at dumping energy from a light object into an object that may well weigh thousands of times more than the bullet, while the ballet decelerates over a distance as long as ten feet..

Re: Question for stock makers

#16

Re: That's a no brainer......

BrianMonumentCO

The impact on a target hit by a bullet is less than the recoil effects as the bullet slows down due to drag and other factors. The recoil has its own limiting factors.

Most important is the weight of the gun as it is in the denominator of the recoil equations.

Certain other factors such as the presence of a muzzle brake, The exact size of the bullet relative to the actual dimensions of the barrel diameter and rifling depth has much to do also.

And finally another key player in felt recoil is the burn pattern of the powder.

If you statement was true then a 300 mag fired at a target would have the same impact over the entire flight,

it DOES NOT!

Re: Question for stock makers

#17

Re: Question for stock makers

BrianMonumentCO

I believe that many of the stocks made by savage are birch.

So it is not a bad choice. Just is not up to the look and feel of a fine walnut.

But then again guys who buy savage guns are looking for accuracy and durabilty not beauty.

Re: Question for stock makers

#18

Re: Question for stock makers

Tom

Good info. Also some, or all of those stocks made of laminates, some of which look quite wild, and others of which are very woody looking, as you know.

http://www.boydsgunstocks.com/content/Boyds/CustomPages/colorchart.htm

Re: Question for stock makers

#19

Ouch!

Joe shelton

My Savage 101L is beautiful rifle. Beauty in a rifle is a cloverleaf.

Re: Question for stock makers

#20

Correct...

John in NM

Many military stocks have been made of birch, both in the US and Europe. Additionally, I've seen many modern inexpensive rifles stocked in birch. Nothing wrong with it at all, but also no point to specifically seeking it out for these stock shims.