Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

17 Sep 2013

Good Morning Everyone,

I will start this off by saying......what AWESOME weather we had this entire weekend.!!!! Nice cool temps, a nice chill in the air at night, and comfy day time temps. I just LOVE cooler weather.!!!

The LOML and I have spent yet even more time in the shop cleaning up, organizing, throwing stuff away that we've collected for years and haven't needed nor even looked for in over 10 years. We are "de-junking" at the same time as cleaning up. The shop cleanup project is making some nice progress and I can now see floor space that hasn't seen day light in a few years. I'm really excited about the progress we've made and the desire to get back in the shop and make things again is beginning to return.

I know that many of you may think...I don't really know who this guy is that keep posting the weekend accomplishments, but he is at least consistent. ;)

Well, I've been an avid woodworker since the age of 14 and I owe the internet and a couple of woodworking forums my due diligence because these forums have been the source of knowledge for me and I have learned a lot from these forums and I am grateful for them. Life changes for us and we simply put woodworking down for a "season" and then we eventually get the desire once again to be creative and enjoy what was once our true passion. I'm that guy that used to live on the forums to try and learn as well as try and help those that were just starting out in woodworking. So.....a Thank You to all of you for helping me be the woodworker that I've become and I pray that I share life, experience, and knowledge with all of those that are where I was years ago....learning and practicing the art of woodworking.

I am committed to doing the Weekend Accomplishments for as long as I am able....so I guess that I'm saying....you're stuck with me until I ain't no more. :D

That's it for me....so what did YOU do this past weekend?

Best of weeks to you all.!!!!

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Went for a hike

Bill Tindall, E.Tn.


I suppose because I am a woodworker I like trees and enjoy hiking among nice trees. A friend owns some land with an outstanding waterfalls and I like to hike there. The more remote places have not been logged in a century or more and there are some massive oaks to be found. Those in the picture are not the largest by far but I thought it was a attractive grove of oak anyway. I counted 12 -24"+ from one spot where I stood to admire them.


Re: WC Weekend Accomplishments....

#3

A little shop organization.....

roger lance

In terms of woodworking, I did some re-organization and fitting of drawers on my main storage bench....lightly planed the drawers were there was binding and waxed all drawer runners and drawer side bottoms. A smooth, free running drawer is a thing of beauty.....and should be a pleasure to use for awhile....


Re: WC Weekend Accomplishments....

#4

What a beautiful place....

roger lance

that waterfall is fantastic.....and your pictures are first rate!

Re: WC Weekend Accomplishments....

#5

Alan Young

Re: WC Weekend Accomplishments....

Alan Young

Spent some time in the Michigan Upper Peninsula hideaway


and stopped in a flea market/antique store found this happy little camper for $50.00


Re: WC Weekend Accomplishments....

#6

Re: WC Weekend Accomplishments

Mark Mandell - Gone Round In New Jersey

Finally got to complete the 3-part urn commission. Walnut and Cherry with shellac and WB Enduro over a light application of Watco. Each section (to be held by 3 family members) is sized to hold 85 cu. in. in sealed plastic. The three boxes are made to interlock and, when "reunited", have pre-drilled mounting screws to fix them solidly. Whole assembly is 12" wide by 11" deep.


Re: WC Weekend Accomplishments....

#7

and made French Bread

Bill Tindall, E.Tn.


I have struggled to get this bread "right". It needs to look good, taste good and have an open crumb. The taste good is easy. I used to get a good crumb but lost it somehow. It usually looks acceptable. Tried the King Arthur commercial bakery formula and technique this time and I got closer. The color is outstanding so I must have gotten good sugar development in the fermentation. The house smelled delightful.

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments

Howard Norman

That is a very pleasant and appealing group.

Re: WC Weekend Accomplishments....

#9

and refinished another section of cabinets

Bill Tindall, E.Tn.



Refinishing is not as rewarding as making new stuff. The drawers are done in this section and they are lighter and brighter. The rest of this section (doors and frame)remain to be done.

I was fooled on this project. These cabinets were finished 21 years ago with Sherwin Williams "waterwhite" conversion varnish. They have darkened a lot as can be seen by the original white ash color under where the knobs went.

I finished a plant stand that is in a very bright room some years ago with a waterborne finish and it has stayed largely the original color, nearly white. So, I presumed the SW conversion varnish had yellowed a lot and colored the wood. In fact the finish had not yellowed much at all. Most of this color is in the outer layer of wood!

Theory: The plant stand was finished with a waterborne exterior finish. My theory is that the UV blockers in the exterior finish kept the wood from darkening. If this theory is true it provides a route to stabilizing wood color, namely finish with a water white exterior finish that has a load of UV blocker.

Re: WC Weekend Accomplishments....

#10

Thanks

Mark Mandell - Gone Round In New Jersey

Family's pleased. That's what really counts.

Re: WC Weekend Accomplishments....

#11

Re: WC Weekend Accomplishments

Jerry Roberts

Well, this isn't woodwrkn but me and my wife bought a new car. The old 2000 Honda Accord 150k miles on it and it wasn't big enough for all the grandkids. We bought a new Honda Odyssey that gives us plenty of room and enough room to fill it with lumber and it drives like...a new one.

Re: WC Weekend Accomplishments....

#12

that's a lot of drawers

Bill Tindall, E.Tn.

Bet you got good at it by the end of them all.

Re: WC Weekend Accomplishments....

#13

The stripped drawers really jump !!


Re: WC Weekend Accomplishments....

#14

Ellis Walentine

Excellent accomplishments this week, folks

Ellis Walentine

Dennis, your "weekend accomplishments" posts are always a highlight of my week, especially when we get such varied and interesting replies. So, I for one will be looking forward to many more of them.

Your concept of de-junking is mighty appealing, especially with your wife involved. In my case, dejunking will have to start with a 20 yard dumpster parked outside the barn.

My weekend was bittersweet, as we visited my brother and his wife outside Dallas, TX. She's fighting lung cancer and we wanted to support her in whatever way we could. She's keeping positive, which is a good thing. My brother is a master woodworker and contractor, and I got to visit a couple of his excellent recent renovation jobs. He specializes in kitchens and bathrooms, with a lot of tile and granite -- gorgeous work. I should have taken pictures of some of his projects. I was particularly interested that he was able to do such great work in a two-car garage. That gives me hope for when Candy and downsize our act one of these years.

Ellis

Re: WC Weekend Accomplishments....

#15

on cleaning

Bill Tindall, E.Tn.

It seems that every time I dispose of some "surplus" I acquire a need for it after it is gone. So, for as long as I have room for stuff I am keeping it.

Re: WC Weekend Accomplishments....

#16

Re: on cleaning

Dennis E Peacock

I thought I was the only person that experienced this Bill.!!! The LOML says I need to keep everything....just in case.......but I kept most everything and we ended up with next to ZERO space left in an 1800 sq ft shop. Soooooooooo....it's been de-junking time for the past several months. ;)

Re: WC Weekend Accomplishments....

#17

Indeed there comes a point....

Bill Tindall, E.Tn.

What I find as I "clean" is that I can reclaim much of the lost space by organizing, with little actually thrown out. But agreed, there does come a point.....

Re: WC Weekend Accomplishments....

#18

Junk?

Mark Mandell - Gone Round In New Jersey

You're kidding, right?

Good Stuff is not junk, it's money on-the-hoof!!!

Yard sale time, dudes! Get those hand-lettered signs out that almost nobody can read as they drive by! Don't forget freebee ads in the local throw-away!

There are hordes of people who ARE JUST ITCHING TO PAY YOU for the privilege to haul YOUR JUNK AWAY!

Be sure to put out something rusty and arcane that the proud buyer will then photograph and post on Sawmill Creek to see if anyone knows what it is and where they can get an owner's manual. :D :D :D

Re: WC Weekend Accomplishments....

#19

Re: WC Weekend Accomplishments....

Matt Robinette

I washed the house and then power washed the part of the roof that faces north. My neighbor gave me an odd look when I told him what I was doing. I even had moss in the valley of the hip. The black mold came off without having to blast holes in the shingles. I used my trusty old craftsman 1900 power washer and the shingles are 7 year old 40 year elk multi layer that are mold and mildew resistant . So I am up on the roof and it is going pretty good when the washer dies so down the ladder I go and I find the new extension hose I had just bought to reach the roof had rubbed the muffler and burned a small hole that was spraying water on the motor. Well the pressure washer is almost twenty years old and the pump has enough leaks that it can also be used as a sprinkler so I move the hose to spray in a different direction other than the motor, restarted the 5hp b/s and back up I went to get the job done. All in all not a bad day I even had enough time to get out to the shop and work on a drawer that goes under the extension table of the new table saw. But that is for another post.