Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

crib ideas

Posts

crib ideas

#1

Jack Guzman from Maine

crib ideas

Jack Guzman from Maine

My daughter is expecting a new baby. She asked me to make her a crib. The last time I made one of those I bought plans from Rockler or Woodcraft and they included hardware for a raiseable side. Since then I hear that style of crib has been determined to be unsafe. What does a "safe" crib look like? Anyone have any ideas that cold help me design something? I don't necessarily need plans, just an idea of what it should look like.---Jack

Re: crib ideas

#2

Re: crib ideas

Bill Tindall, E.Tn.

Someone in our club gave a program on cribs, including a hand out copied from somewhere that described the government regulations on crib building. It was boggling. The factors included heights to prevent crawling out, latching to prevent a precocious baby from escaping, and spaces to prevent getting stuck or wedged. I will see if I can find where he got the information and report back.

Re: crib ideas

#3

Jason Roehl in Lafayette, IN

Here you go, sort of... *LINK*

Jason Roehl in Lafayette, IN

Yet another example of government over-regulation, in my opinion and experience. Yes, there are tragedies associated with cribs, but this particular regulation was pretty onerous and costly to day care providers (our church had to comply, but we've recently closed the day care). This regulation did not allow for grandfathering, so all new cribs had to be purchased. Perhaps crib manufacturers were regretting the production of overly durable cribs and lobbied the CPSC to make this change?

These types of regulations will bankrupt us eventually.

Jason


CPSC Crib Standards

Re: crib ideas

#4

Re: crib ideas *LINK*

Mark Mandell - Gone Round In New Jersey

The "regs" apply to commercial operations, of course (those who make a business out of making/using cribs) but the requirements are easy for anyone to meet, resulting in increased safety for the child. There are wide open spaces for design while still meeting the guidelines.

When I did my grandson's crib last year, I had my son and DIA research for ideas in style from the many on-line sources. From straight cribs to those that convert to youth beds, there are hundreds of choices in prices that range from several hundred to over $12,000.

We opted to keep things simple, so no drop-side or folding side-latch issues to deal with.

A tip. Since I did the side rails out of 1" stock (with 3/4" balusters), it would have been a tough job to put the plastic teething shields on the tops as the shields are made to fit 3/4" rails. Instead we chose to use the lace-on teething shields which do just fine.

There's a great satisfaction waiting for you when you see your grandchild sleeping in the crib that you have made. Go For It!!


Crib Specs

Re: crib ideas

#5

Re: crib ideas

Bill Tindall, E.Tn.

When I built one a VERY long time ago I hinged the slatted side for easy access. The side just swung down between the vertical posts like a door on edge. It was pinned in place in the upright position.

A lot of the safety stuff seems geared to leaving the kid in the crib till they are old enough to get into trouble from its design (letting themselves out, climbing out, etc.) The crib is being employed as a playpen.

We got our kids out of the crib and into a small low bed in short order. A crib is something that may only be used a short time. Personally I would not devote a lot of effort to making one. Better to spend the effort on a youth bed or a chest of drawers or a desk that will be of lasting value.

Re: crib ideas

#6

some simple guidelines *LINK*

GolfSteve in Calgary

Many of these hazards are not obvious to the consumer or even to manufacturers, but these hazards have resulted in deaths - not a lot of deaths, but enough deaths and close close calls. A few simple design changes, and you have a safe crib.

I posted this on the hand-tool side yesterday, but I'll copy it here so more people can see it:

The Government of Canada used to have a good bulletin giving some safety based design guidelines for cribs. The bulletin has disappeared, probably because drop-side cribs are no longer allowed.

Keeping safety in mind with the design:

- corner posts are not allowed to protrude more than 3 mm above the rails (so that if a child crawls over the top of a rail, they cannot hang themselves if their clothes get caught on the post).

- the slats must be close together so that their head cannot get caught between the slats.

- the mattress must fit within the crib with a specified tolerance so that the child cannot become entrapped between the mattress and the crib, resulting in suffocation.

- the floor must be firmly attached so that the mattress cannot drop, causing a entrapment hazard.

- the rails must be a certain height so that babies cannot easily climb over them (at least until they are older, then they love doing that!)

This picture, copied from the outdated government brochure, pretty vividly highlights the hazards:




Crib design and safety bulletin (outdated)

Re: crib ideas

#7

Re: crib ideas

GolfSteve in Calgary

Having just raised two kids through the crib years, I agree fully with Bill's statement:

"A crib is something that may only be used a short time. Personally I would not devote a lot of effort to making one. Better to spend the effort on a youth bed or a chest of drawers or a desk that will be of lasting value."

A crib is only needed for about 1.5 years. If someone had made me a nice heirloom crib, I would feel bad disassembling it and stowing it into the attic for the next 30 years.

We bought a crib that converts into a double bed (I think they are called three-in-one beds). This worked very well, and can be used into adult-hood. The one I bought was very well made out of solid birch.

Re: crib ideas

#8

On The Other Hand

Mark Mandell - Gone Round In New Jersey

There is great personal satisfaction in creating something unique for your children and grandchildren (perhaps even your great-grandchildren) and lends a bit of magic to life.

Re: crib ideas

#10

Re: Here you go, sort of...

Howard Acheson

Yes, under the new regulations even items made in the home shop are required to be tested by a certified testing organization. It makes no difference if the intended use is for your own child. Anyone who makes an item that fits the definition is classified as a "manufacturer" and is subject to the regulation. The regulation covers anything intended for use by a child 12 years old or less.

Here is some info on the regulation.

http://www.cpsc.gov/Business--Manufacturing/Business-Education/childrens-products/

Re: crib ideas

#11

Not Quite True

Howard Acheson

>>>> The "regs" apply to commercial operations,

The regulations applies to any "manufacturer" and anyone who makes an item intended for use by a child 12 years old or less is defined as a "manufacturer". Take a look at the reference in my prior response. The regulation covers anything you make, sell or give away.

In addition, adherence to the regulations is not very easy and complying with the testing regulations is not inexpensive.

Re: crib ideas

#12

Re: Not Quite

Mark Mandell - Gone Round In New Jersey

Howard,

I suggest you take a day or so to dig into the Consumer Products Act and it's enabling regulations to find out what the scope of "consumer products" is and the definition for the standard of "manufacturer". I am fairly confident that the Act does not reach to someone making a crib for their own grandchild, and that I am not required to submit my grandson's crib to some testing company.

Re: crib ideas

#13

Jack Guzman from Maine

Re: crib ideas

Jack Guzman from Maine

I've seen alot of designs for cribs that convert to a child bed without alot of effort. I'm thinking of looking in that direction when I design this crib. I'll get some feedback from my daughter on her wants.---Jack

Re: crib ideas

#14

Jack Guzman from Maine

What size mattress?

Jack Guzman from Maine

How big was the crib? Were you able to use the same mattress to convert it?---Jack

Re: crib ideas

#15

Jack Guzman from Maine

Re: On The Other Hand

Jack Guzman from Maine

The first crib I built years ago was for one of my sister's 11 children to use for her first child.That crib has been passed around the family quite a few times. That is a very nice feeling to know that. My daughter was going to use it but decided instead to ask me to make one just for her. Of course I accepted.---Jack

Re: crib ideas

#17

Re: crib ideas--Convertibles *LINK*

Joanne in Point Pleasant, PA

For some inspiration on building a crib that will convert to a bed later, take a look at Young America's Built to Grow beds. That's exactly what they do. You can probably build something like that pretty easily. It may just be a matter of changing rails and feet/legs.


http://www.youngamerica.com/built-to-grow

Re: crib ideas

#18

Re: crib ideas

Larry in nw ohio

Jack Over the years I have made 3 baby beds, one for each of our children. The last one I made was a 3 in 1, it has not gotten out of the baby stage as of yet. they are in the process of moving and I think it`s going to be a single bed after they move. If you want to see them, they are all in the Shop Shots. One is in the 400-500 8-14-03, the second one is at 7-05-04,600-700, and the 3in1 is at 890 at 8-03-08. Good luck with you bed, it is a very great project and very satisfying to do, and make sure you put your name and date it was made. I would like to make more of them. Larry

Re: crib ideas

#19

Re: Not Quite

Howard Acheson

Mark, the woodworking club I belonged to before moving to the golf course spent time last Fall exploring the ramification of the Consumer Products Safety Improvement. One of the members is a lawyer practicing in that area of the law.

There is no where in the current law excluding certain types of children's items. There is no exclusion for who uses the item. The regulations apply to any item manufactured intended for use by a child 12 years old or younger. There is no exclusion for family members.

For a number of years the woodworking club made small toys and/or items for use as gifts for disabled or otherwise challanged children. The charities we supported also told the club that they could not accept any items and longer unless they had the certification attached.

Mark, I am not trying to act as a policeman in this issue. I am not a lawyer. If one disagrees with this interpretation of the regulation then the onus is on the manufacturer to prove the regulations do not apply to their particular situation.

Re: crib ideas

#20

Very Different

Mark Mandell - Gone Round In New Jersey

In your scenario, that charity becomes like a retail store, your group becomes a "manufacturer", and the toys become "consumer products" all within the meaning of the Act, so I can see why you might be deemed to run afoul of the regs. I do remember the brouhaha over the charity toy-making issue several years ago. That, however, is a very different situation from you, me, or Jack making a crib for our grandchild.

All that said, voluntary adherence to the regulatory standards and restrictions still makes sense as my (and over other grandpa-maker) effort should be to make something that is safe for the precious person who will use it. Were I to beat my chest over "nanny-state" principals, and make my kid a drop-side crib with nifty post finials only to get a call that my grandchild hanged himself or suffered some other egregious injury because of what I made or failed to do, it would be pretty hard to live with myself.

But then, that's just my take on things. Having dealt with Federal rule-making on a number of things over the years, I have more respect for the efforts that go into drafting regulations than many others do. Standards are very very rarely arbitrary.

Re: crib ideas

#21

Jack Guzman from Maine

Re: crib ideas

Jack Guzman from Maine

Nice stuff Larry. Your efforts will be helpful to me for ideas.---Thanks---Jack

Re: crib ideas

#22

Re: crib ideas

Larry in nw ohio

Jack Just like everyone around here, always happy to help. If you have any questions just ask. Larry