I finished my first guitar
GolfSteve in Calgary
I finished my first guitar - a classical guitar based on the John Bogdanovich plans & DVD, modified to include a cutaway. I started construction in about March 2012 and finished June 01, 2013. I have no idea how many hours I spent - probably around 200 hours plus another 200 hours looking up stuff on the Internet.
The guitar is loud with very clear trebles and nice deep bass. Lots of sustain and sympathetic vibrations between the strings.
Italian red spruce top (sourced on a business trip to Hearne Hardwood in Pennsylvania).
East Indian rosewood & yellow cedar sides.
EIR back and bridge.
Curly mahogany binding.
Spanish cedar neck.
Ebony fingerboard.
Maple burl in rosette.
Gotoh premium tuners.
Shellac and Mohawk nitrocellulose lacquer finish.
I posted numerous construction photos here if you care to look: https://www.facebook.com/media/set/?set=a.10150707942520772.422729.569885771&type=1&l=63e80d3519
The hardest part of the construction was bending the binding strips (with side purfling) for the cutaway. I broke or had kinks in about 8 binding strips before I got it right. I wouldn't recommend a cutaway on a builder's first guitar unless they only plan to build one guitar in their life. I will also avoid using curly mahogany for binding a cutaway - too fragile at the thickness you need to achieve the bend.
The most stressful part of the construction was routing the binding channels. I still have the shakes from that.
The rosette looks great. I thought that would be difficult, but it turned out to be relatively easy except it consumed about a million dollars worth of veneer. Using the Bogdanovich method you make enough herringbone to complete numerous guitars.
I have a pretty well set-up shop, but I still spent a small fortune on wood and specialty items. The biggest unplanned cost was when I bought a heating blanket and controller after I had so much trouble bending the binding on a hot iron. For the most part I avoided buying unnecessary specialty tools, but did get sucked into a few that, in hindsight, were not necessary. I ran out of veneer a couple of times and could not find a local source, so that got expensive.
I thought the Bogdanovich book and DVD were very good. There were a few mistakes and inconsistencies, but overall the instructions were top notch. I had a few questions and John was kind enough to answer them for me.
Finishing a guitar is strangely satisfying compared to completing any other woodworking project.
Now my poor old Taylor DN4 steel string, which I used to love, sits unused and lonely in the corner...
















