Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Now that's what I need from Lee Valley *LINK*

Posts

Now that's what I need from Lee Valley *LINK*

#1

Now that's what I need from Lee Valley *LINK*

Lee Schierer McKean, PA

Now this is a tool I could use from time to time for clamping up those odd shaped pieces.

Lee


Spider Vise

Re: Now that's what I need from Lee Valley *LINK*

#3

I'm always amazed...

John in NM

Just how much effort they put into those every spring....

More amazed that there is also an explanation page, maybe I never looked before, but that is the first time I've seen it. Kinda like explaining the punchline, not sure that's such a good idea...

Re: Now that's what I need from Lee Valley *LINK*

#4

Re: I'm always amazed...

Stuart Hough

SO COOL! And at a "svelte" 99.9kg, I could move it with wherever I want to...AFTER enloying a box of Wheaties! Kudos to Rob and the Lee Valley team for another great April Fools's tool! The neat thing is, they ALL really do work!

Re: Now that's what I need from Lee Valley *LINK*

#5

Is it just me?

Thomas Skaggs, Foothills of Mount Level

Every year I love the "latest from LV" on April 1rst. I laugh and roll my eyes. Am I the only one who looked at this year's offering and actually thought it could be useful? It's not that ridiculous!!

T.

Re: Now that's what I need from Lee Valley *LINK*

#6

Alan Young

Two Old Fools

Alan Young

OK yeah I'm with you on this one. Kinda like the Jupe Table design.

-Alan

Re: Now that's what I need from Lee Valley *LINK*

#7

Re: Is it just me?

Bill Tindall, E.TN.

I was about to order one till I saw the price.

Re: Now that's what I need from Lee Valley *LINK*

#8

JL

I wanted the full round spokeshave...


Re: Now that's what I need from Lee Valley *LINK*

#9

I wonder if the guys at BenchCrafted.....

roger lance

are laughing as much ??

Re: Now that's what I need from Lee Valley *LINK*

#10

Not so far from your wish

Gary Smyth

Ta Daaaa

Re: Now that's what I need from Lee Valley *LINK*

#11

I was feeling cheated ! Now, all is well.


Re: Now that's what I need from Lee Valley *LINK*

#12

JL

That's closer to a scorp..

JL

Or inshave rather than a spokeshave.

Re: Now that's what I need from Lee Valley *LINK*

#13

The funniest part....

John Pappas

motion is translated into a single revolution of each arm screw, moving the jaws 0.0769230769230769"

can't stop laughing

Re: Now that's what I need from Lee Valley *LINK*

#14

moving the jaws 0.0769230769230769"

Bill Houghton, Sebastopol, CA

Roughly. Approximately. More or less.

Re: Now that's what I need from Lee Valley *LINK*

#15

You're correct of course, that pic could

Gary Smyth

be considered both a scorp and a converted inshave. My intention was to play against the earlier April 1 LV fake round spokeshave tool with one that using the same words could be named. Bad communication and misapplied thought on my part...

Re: Now that's what I need from Lee Valley *LINK*

#16

Re: Now that's what I need from Lee Valley

Joanne in Point Pleasant, PA

And I've been agonizing over the details for a leg vise in a new bench I'm building--Now I want one of these instead!

Re: Now that's what I need from Lee Valley *LINK*

#17

Curiously, 0.0769230769230769..." ...

Larry Barrett

is exactly 1/13", and 13 tpi is no doubt commonly used on LV special tools.

Re: Now that's what I need from Lee Valley *LINK*

#18

I'm slightly disappointed

Bill Houghton, Sebastopol, CA

that they didn't also mention that the dimension is 1.953846154 millimeters.

Not sure what it is in cubits.

Re: Now that's what I need from Lee Valley *LINK*

#19

Re: 0.004273504273507691 cubits


Re: Now that's what I need from Lee Valley *LINK*

#20

I love it ! And I want one.