Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

36" Rule?

Posts

36" Rule?

#1

36" Rule?

Tony-Memphis

I have a nice Starrett 12" and 24", but I find myself wishing I had a 36" rule often, so I thought I'd dig around a bit. The Starretts are sweet, but I really hate to spend over $130 on a ruler right now. Any decent models out there for a "reasonable" price?

Thanks,

Tony

Re: 36" Rule?

#2

JL

Re: 36" Rule?

JL

If you don't want a precision one - try Lee Valley.

The LOML got me a set of the stainless steel cabinetmaker's rules a while back - quite inexpensive. They also have a 36" rule.

She also got me a set of the phi rules at the same time - those I really haven't used much.

Re: 36" Rule?

#3

Re: 36" Rule?

Bill Tindall, E.TN.

I have survived adequately with a 36" aluminium rule. I saw a nice steel one at Micheal's (not sure of spelling) mega craft store and I suspect any art supply place would have something similar.

I also use a clear plastic affair that I bought from a quilting supply place.

I use these things as straight edges more than rulers. Not sure I ever use them as rulers.

A dry wall T-square is also handy.

What is your application?

Re: 36" Rule?

#4

Bill's right about application

Gary Smyth

Sewing supply houses may be a better bet. Less expensive too. Art stores also have cutting mats along with straight edges and rules. My favorite is the one that uses the edge as the first measuring mark, not one inset by 1/4"

Re: 36" Rule?

#5

Application?

Tony-Memphis

Uh, measuring things!

I use mine to lay out joinery for the most part. The way I work, consistency is more important than accuracy, otherwise, I'd buy another Starrett. May do that anyway as it is something I'll have for life. I use my 24" alot, but it just seems like a lot of things are just over 24" these days.

Tony

Re: 36" Rule?

#6

Re: Application?

Bill Tindall, E.TN.

I find most lay out can best be done with dividers. For example I lay out drawers for a chest of drawers with two dividers one set to the first drawer height and the second set to the divider thickness. Over time I use a ruler less and less.

I have a Starret 12' tape measure that I use for most of my long measuring needs. It is small, easily handled.

Re: 36" Rule?

#7

Re: 36" Rule?

Thomas Skaggs, Foothills of Mount Level

I have both precision rules and cheap metal rules. I use them both but the results are about the same.

Tom

Re: 36" Rule?

#8

Re: 36" Rule?

Robin Corell in Atascadero CA

about 15 years ago I picked up a used 48" sterrett for $50, its not hard chrome but it still works the same. I also picked up a 36" raybone & chesterman for $25 mostly because it is a much lesser known brand of precision rule.

Having both a 36" and a 48" I would suggest the longer.

Despite what others have said I do think that a precision rule is money well spent.

Robin

Re: 36" Rule?

#9

Reference Rule

Mark Mandell - Gone Round In New Jersey

I have had, for more years than I care to remember, a 30" Starrett rule (in a nifty Naugahide sleeve). I use it not as a working tool, but rather as a standard against which all my shop measuring tools are compared and (of needed) calibrated. That way, everything in the shop "rules" to the same tolerance, be it a tape measure, a yardstick, the tablesaw fence, or whathaveyou.

Re: 36" Rule?

#10

PS

Mark Mandell - Gone Round In New Jersey

Where I got a 30" Starrett rule is long gone in the mists of time as they don't list such a product on their site and I haven't been able to find another. Memory being what it is, I may have gotten it from somebody who whacked off the last 6" for some reason.

Re: 36" Rule?

#11

Re: Reference Rule

Robin Corell in Atascadero CA

It woudn't surprise me if your 30" rule was made that way. All the sterrett rules I have are marked on both edges and on both sides so if two of your scales start at 6" that would tell you if it has been cut down.

There are a lot of sterrett tools floating around out there that are no longer available from sterrett. I have a 3" rule that has graduations on each end and it is no longer being made.

Robin

Re: 36" Rule?

#12

Re: Reference Rule

Larry in nw ohio

I also have Starett rules, 4 of the. They are 2 and 3 foot for around the TS and the other 2 are a 4 foot and a 6 foot for around the assembly area and where ever I need an extra long measure or straight edge. I know they are pretty much overkill, But I used them at the old job I had and I really like them and thought at the time, whenI retire and work in my shop I would like a few of them. I found them on ebay and got them fairly cheap. It took awhile to find good ones for the price I wanted to pay, but they are worth it. Larry in NW Ohio

Re: 36" Rule?

#13

You Pay a Premium for Starrett

Joe Burke

Starrett tools are good, but you pay a premium for the name.

There are several other brands with good quality and lower prices. I have more than one machinist tool made by Pec, but again, there are others. Enco and MSC are two companies that sell machinist tools so try those. One company (I can't recall which) lists options for specific tools in what amounts to a "good, better, best" arrangement. You'll see the word "import" down the list from the premium brands. There are price point options.

For what it's worth, I like the hook rules.

Re: 36" Rule?

#14

Good thought...

Tony - Memphis

I should use my dividers more than I do. Great tool and very traditional.

Tony