Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Very basic tablesaw question

Posts

Re: Very basic tablesaw question

#26

I think you have it there...

John in NM

Anyone can run out and buy a saw, and start using it with little or no instruction. I tend to think that this is as it should be, but I also understand that this freedom comes at the price of an increased incidence of accidents.

Ignorance of the machine, ignorance of the predictability of simple physics, and the complacency that comes with repeated actions are what cause the accidents in my experience. For what its worth, I have had a total of two table saw accidents in my lifetime, neither drawing blood and both the direct result of complacency. I have avoided countless accidents through a thorough understanding of the former two components however. For what its worth, the three other accidents I have witnessed also were the result of complacency.

I've not watched the vids, I don't have handy a computer that will play them at the moment. I do however use two push sticks, needless to say I'm very curious to discover the mortal danger I seem to be in :D

Re: Very basic tablesaw question

#27

Bob

If you have a ...

Bob

I had been using my table saw for just about everything I cut until I need to rip something and I had a dado set up in the saw so the light bulb goes off and I decided to use my band saw and have been using it for just about everything now. I had to rip some 8/4 maple for a bench I am making, I built a sled and mounted rubber wheels on it to keep the 10 foot boards tight against the fence and got perfect cuts and no burns it beats my uni-saw hands down I use a 1" King blade with 2 TPI.

Re: Very basic tablesaw question

#28

Re: another video link to European setup

Sgian Dubh

Rick, the saws used in those videos to demonstrate the European/ British configuration of the rip fence, the riving knife, crown guard, and the mouth piece (where fitted) are indeed typical of larger industrial saws, and the settings of the various parts and the techniques used to rip wood is also typical.

However, the majority of saws sold and used in Europe are generally much smaller and typically use something like a 10" diameter sawblade, similar to typical and common US saws. Many professional woodworkers use saws like this, as well as amateurs, but the basic layout of the various parts is essentially the same as the large saws in those videos, and their method of use is the same too, at least it either is, or should be, in professional workshops.

What amateurs get up to is up to them. I'm aware that some amateur woodworkers in this country rail against using saws in the manner sanctioned by the HSE, and acknowledged as being good practice by the woodworking industry. In many cases they've learnt of typical US table saw practice through seeing the woodworking shows featuring Norm Abrams, and perhaps others, and reading US magazines like Fine Woodworking. They want long fences, dado blades and all the other goodies (sic) seen on US style table saws, and they often want to copy the techniques demonstrated. I don't agree with that stance, seeing as there is nothing advantageous or beneficial in US style saws and how they're used in North America, but it's not for me to stop those amateur woodworkers working that way if they want to. Slainte.

Re: Very basic tablesaw question

#29

I've got a question for you Sgian

Joe Burke

Having watched the You Tube clips I've understood for the first time what I've heard for years about Euro saws ... crown guards ... splitters and short fences. Very interesting. It looks safe in spite of that huge, attention getting blade in the videos, and it all makes perfect sense. I'd tried ripping with a short fence some time back and it scared me to death. Now I know why. No crown guard ... no splitter etc. etc.

I'm impressed with the setup, but my first thought was that, I change what I'm doing so often I wouldn't know how to make it work. I'm subject to rip solid stock, rip a sheet of ply, mdf or some other 4x8 monster, and make blind cuts (I assume that's what you'd call cuts that don't go through) and even crosscut something all in the same hour.

So how does the typical Euro shop handle the crosscutting, blind cutting and sheet goods processing? I'm sure large shops will have separate saws set up for individual tasks, but what does the little guy do?

The crown guard alone on those saws looked as if it would tip smaller saws over.

It's certainly interesting to see how others work though.

Interestingly, I've also started using a 7 1/4" blade for the bulk of what I do on my tablesaw. Sorry I don't remember who in the thread to credit with having said that. I stumbled upon the virtues of a 7 1/4" blade on my PM 66 quite by accident, and I've been wishing I'd stumbled earlier ever since.

Re: Very basic tablesaw question

#30

Re: I've got a question for you Sgian

Sgian Dubh

Joe, I think it may have been Bill Tindall who talked about using a 7-1/4" blade. If it wasn't that he was talking about, he certainly mentioned using a thin kerf blade.

I'll try and respond to your questions in order, but first I should mention that what you saw in those videos were examples of industrial saws dedicated to ripping, and no other task. Where the saw has a large sliding table capable with an 8' or 10' stroke you're looking at another industrial machine which in all probability will only ever really be used for breaking down large panels accurately, cross cutting operations of solid wood, and for such tasks as various angle cuts, eg, compound angles. These large dimension saws (to give them their other common name) are generally not particularly well suited to ripping because of the large amount sliding mechanism hanging off to the left and front (operators side) of the sawblade that makes pushing solid stock past the blade, even with a pushstick, rather challenging.

Moving on to the sort of machines used by amateurs and small professional businesses, many, but not all, of the smaller table saws here in the UK extend their capabilities with sliding tables so that cross cutting is possible as well as ripping operations. True, on the smaller saws where sliding tables are fitted, the stroke tends to be limited meaning they can't easily handle large panel products.

However, for large panels, two approaches are fairly common. Firstly, panels can be broken down roughly to size with hand held power saws, and some users swear by such tools as the Festool or Mafell saws and their guides.

http://www.festool.co.uk/Products/Pages/Product-Overview.aspx

http://service.mafell.de/index.php?IdTreeGroup=12967

The second approach is to rig up roller supports or similar to support the offcut to the left of the sawblade, and extension tables at the outfeed end. It is possible using an arrangement like this to rip large panels lengthways, if you have the workshop space. On the whole though, I think the rough cutting down of large panels into manageable units using buzz saws (or even perhaps a jigsaw) is probably more popular prior to accurate sizing on a (smaller) table saw.

Blind cuts, or non through cuts as we tend to call them, can be done with routers of various sorts-- mostly you're talking about grooves or channels (frequently and incorrectly called dados in the US) and rebates, along with cross cuts such as a housing or a trench, which is the alternative name for a dado! Some non through cuts are possible with machines like radial arm saws, and interestingly, dado heads can often be fitted to radial arm saws because the arbor is long enough, something which is rarely the case on a table saw, usually because the arbor is deliberately too short. Slainte.

Re: Very basic tablesaw question

#31

Thanks for the info

Joe Burke

It's always interesting to me to see, or hear, how others work. More often than not we're all making what we have work for us as best we can. I often wonder if I'm the only one doing things a certain way. Case in point ... using the 7 1/4" blade on my PM 66. I thought I was an innovator. Back to being a face in the crowd I suppose.

I admit to being relieved to hear that those saws were industrial and dedicated to ripping. Seemed obvious enough, but those were some healthy saws none the less.

Thanks Again.

Re: Very basic tablesaw question

#32

Re: Thanks for the info

Larry in nw ohio

Joe It is Bill that uses a 7-8" blades. Larry

Re: Very basic tablesaw question

#33

Re: I've got a question for you Sgian

Rick Christopherson

The danger of this is that you are advocating techniques used for tools that do not exist here in the U.S. Over-championing these concepts loses sight of the fact that these concepts are not universal for all tools. The novice woodworker is going to be enamored with the idea that he is doing something "European posh" but he doesn’t realize that it actually doesn’t apply to the tool he actually owns.

The original poster asked about blade height, but you went off on this European tool design tangent. This is dangerous because you are discussing European techniques as though they apply to U.S. tools. They are not the same, and you know that.

This is not an argument I really wanted to enter in to, but when I see novice woodworkers buying into these concepts without understanding them, then I need to step in. What you are advocating is fine with European tools, but it is not fine here with U.S. tools.

Re: Very basic tablesaw question

#34

Re: I've got a question for you Sgian

Sgian Dubh

There certainly are differences in saw configurations between one geographical area and another Rick. And your point about "advocating techniques for tools that do not exist here..." applies in both directions. Some British woodworkers, only a few I suspect (and possibly other people from a range of geographical regions) are inspired by woodworking techniques, including table saw techniques, described by American woodworkers through a range of media-- magazines, TV shows, various internet sources, etc. Perhaps their interest is kindled through limited knowledge and experience of 'normal' woodworking practices in their area.

You suggest I'm wrong to describe well established practices for using typical European style saws, but couldn't the same be said for yourself in light of the fact that anyone anywhere in the world can read your Table Saw Techniques article here: http://www.waterfront-woods.com/Articles/Tablesaw/tablesaw.htm ? This article could include some sort of indication that the saw configuration and techniques described really only apply to certain types of machine and their users, and that some of the of the techniques and advice may be inappropriate for users of saws configured differently. Your article might suggest to the unwary that US style saws and the way they perhaps are best used are universal, which of course they're not, but that's the complaint you made against me.

In reality, I didn't instigate the tangent about European table saw techniques. What actually piqued my interest was your response to Eliot where you said you did not like the "lack of control toward the end of the cut using a short set rip fence". I've used American style saws quite a lot, including a Delta Unisaw with the Unifence along with a splitter and an aftermarket crown guard. In my case I didn't experience this lack of control you seemed to experience. I can only speculate about the reasons for that, but perhaps it's because I'm used to using a saw that way and it all came completely naturally to me. On the other hand, using Powermatic and Grizzly brand machines, and one or two others along with their full length fences and usually an absence of all guards just felt all wrong. Slainte.

Re: Very basic tablesaw question

#35

amen to that

Bill Tindall, E.Tn.

"Interestingly, I've also started using a 7 1/4" blade for the bulk of what I do on my tablesaw. Sorry I don't remember who in the thread to credit with having said that. I stumbled upon the virtues of a 7 1/4" blade on my PM 66 quite by accident, and I've been wishing I'd stumbled earlier ever since."

People that have tried it usually come to the same conclusion. I've had one on the saw for years, ever since I saw the person demoing his hold downs at a show use one.