Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

leaving WC

Posts

leaving WC

#1

leaving WC

Joseph Mulherin

I am leaving notice that I am leaving this WC website and just finish up on my two present chairs, then probably just sell all of my tools and end the woodworking....why??? seems no one is interested in my projects and workings...even here at home.

Re: leaving WC

#2

Re: leaving WC

Jim Breeden

WHAT !!!! :(

Re: leaving WC

#3

Before You Go . .

Mark Mandell - Gone Round In New Jersey

You seem rather angry although you got a number of responses to your chair posts, Joseph. Can't speak to "home" of course, but curious as to what were you expecting from people here that you didn't get.

Re: leaving WC

#4

Ellis Walentine

Not interested?

Ellis Walentine

Hmm, it seems to me that you had a pretty lively discussion going on your chair seat project, Joe. I'd be really curious to know what prompted this declaration. You've been a pillar of the community here forever. Surely you don't feel disrespected?

What's going on? What can we do better?

Ellis

Re: leaving WC

#5

Re: Before You Go . .

Ken Oakley-Sunny St. Cloud, FL

Sounds like a major pout to me

Re: leaving WC

#6

Something to think about

John Pappas

Joe,

I read most, but not all, of what is posted on WC. Occassionally I will feel that I have something to contribute to a given thread, but more often I read them, with interest I might say, without leaving any comment. I hope you take time to reconsider. Tomorrow you may feel differently. Something else I have learned in my 75+ years, "Don't burn any bridges, we never know when we might need them."

John

Re: leaving WC

#7

Re: leaving WC - a different perspective

Carol Reed, Pahrump, NV

Joe, your reaction to recent events is troubling. Of course, you will be missed here if you do leave, but the more important thing is that you will miss something you obviously have cared deeply about for some time. Your proposal to dispose of all of your tools is a sign that something is amiss. I hope you have people in your life who care for you and that they will encourage you to get a complete medical workup to determine what may have brought about this abrupt decision. I say abrupt because from our perspective it is abrupt. Sometimes as we age our chemical balances in our bodies change and need to be addressed. Please go get checked out just to make sure that everything about you is good to go - and then make life changing decisions if you choose to.

For the rest of us, we will try not to take things personally and respond defensively, but rather try to find ways we can be support to you. Perhaps our days of sharing woodworking experiences has not yet come to a halt.

Re: leaving WC

#8

Re: leaving WC - a different perspective

Joseph Mulherin

Yes, Carol, I do have some medical issues, but that is not the problem with what is happening in my life here at home. I just feel that I fit in anywhere anymore and my projects do not fit into the family's "decors".

One year I made 19 mantle chime clocks for friends and family which were very well accepted, but in decideing to make these rocking chairs I am getting the distinct impression they are not wanted by anyone. So, I shall finish up with the two chairs I have ongoing and just piut them out for someone to come and take them away...... medical issues are being tended to and I do not have any "mental" problems... just total disgust with my surroundings in this later life.

Re: leaving WC

#9

Jesper, Denmark

Re: Sad to see you go......

Jesper, Denmark

But you gotta do wht you gotta do.

I trust that the members here were not part of your decision - there is room for all - lurkers, occasional posters and even those with verbal diarrhea (sp?).

There is no need for drastic decisions or other reactions. Take a break, and come back when you veel like it.

Re: leaving WC

#10

Do it for yourself!!!

Chad P

I don't know about you but even if my work did not appeal to my wife I would still do it because I know I am building things I like and I enjoy doing it. Even without a ready market of friends and relatives I don't think I would ever be "finished" with woodworking.

I will continue to build things as long as I enjoy doing it. Similarly, if my relatives were beating down the doors for my work but I didn't enjoy the process then I would stop.

Re: leaving WC

#11

Do what you like

GolfSteve in Calgary

Find project you like to do for yourself. I'vefound that doing projects for others us very hit or miss unless someone asks you to do something special.

After a while you find you don't need any more furniture in the house.

Find something that challenges and interests you and forget everyone else.

Re: leaving WC

#12

Re: leaving WC

Harry Ludke

I think maybe it's time to take a break from woodworking and find something new that might interest you. I'm easily bored and will do "flat" woodworking for a while, than switch to my lathe and so some turning. During the summer my woodworking shop is only used in conjunction with house renovation projects. In the Fall I'm eager to get back into the shop and have lot's of interesting ideas.

I usually don't make furniture for family unless they have a specific piece that they want. Than I build it to their taste and specifications. Usually I make thing just for the fun of it! I love the "process". Once it's made, I could care less what happens to the piece. Lot's of stuff is given away or donated. Our local historical society has a yearly silent auction to which I donate turned pieces and furniture.

Like you, I've made rocking chairs. My last 5 rockers were from the Hal Taylor design and were a real mental stretch to build. These rockers made me realize I could build whatever my brain set it's mind to. This let to the building of a 17' Ceder wood strip kayak the following winter.

What I'm really saying is build what's fun for YOU, broaden your woodworking horizon and take a break to recharge your battery!

Re: leaving WC

#13

Indeed, yes

Bill Houghton, Sebastopol, CA

Sometimes repotting is necessary. You might look into how else you can seek satisfaction in your work.

Perhaps there are programs - your local high school, YMCA, somewhere - that you could find a young person eager to learn what you have to share.

Perhaps you can build the pieces you'd like and donate them to charity auctions, or sell them.

If there's a woodworking guild/club in your area, members might have some ideas; or they may be the folks who can offer the kind of respect you'd like to get for your work.

If the frustration is external - look at how you can change the external. If, as you think about it, it's internal, then perhaps it is time to hang it up; none of us is you, and you alone can make that kind of decision.

Before I sold my shop, though, I'd lock it for a while and see if other things I enjoyed filled my life; or if I found myself wanting to get the key out and go back to the shop.

Re: leaving WC

#14

Re: I'm also sorry you feel like leaving WC

Gary Camp, Bend Oregon

I read your posts even though I don't comment. At this stage of my life I seldom get time for "projects" My time mostly goes to improving our property. The lessons I get here on WC will be saved for another day. I hope to be able to continue reading your posts and learn the lessons you can teach.

glc

Re: leaving WC

#15

Re: leaving WC

Joseph Mulherin

I have read many reply to my "decision" on leaving WC, and I do appreciate all of you guys and gals for your support in a trying time for me. And Harry, I shall take a break and wait until maybe summer of fall to get into some woodworking again. It really is a shame...because I have been doing such since 1977 and it has been an enjoyable time for me to make things which others appreciate receiving. I have spent maybe $6,000 for all of my equipment and tools. I have spent about $6,000 on the saws, drillpresss, planer, and all of the handtools over the years.

Might get back into making some pottery...I .built a table and it is motorized and does work nicely.

OK, I shall stay here on WoodCentral and offer any advice I can in areas I have vast knowledge of.

I worked as a pipefitter/ plumber/welder...and a session as an electrician. Also did some pipe insulation earlier. Much knowledge is there I could forward...if wanted. Also have repainted cars in the past....rebuilt engines and carbs...but no more.

Re: leaving WC

#16

don't quit.....

Bill Tindall

Take a break from woodworking for a while. Try something new. After a break you may find woodworking rewarding again.

Re: leaving WC

#17

Re: leaving WC

George Colonel's Workshop-Havertown PA

Good Afternoon Joe,

Every once in a while I've taken a little break from the shop, which sees me for several hours every day. There are times in my past life that I've had to walk away for a change of venue or a change of cast. Its refreshing, and brings a new perspective. My advice is to turn out the lights for a few weeks, and then try again. And, as you are taking a break from your physical routine, you do not have to quit the forum. Stay connected. I have valued your posts.

George

Re: leaving WC

#18

Re: leaving WC

Larry in nw ohio

Joe I hope you do not leave, but remember if you do there is an enormous amount of information that is going to go with you that a lot of us could benifit from. You were a pipefitter, electrition and a lot of other things the younger KIDS here could learn from. I can understand that if you need a little break from the every day things in your life, maybe you need a little vacation. Is there someplace you would like to go to just relax. I hope you change your mind. Larry

Re: leaving WC

#19

Re: Indeed, yes x2

RobCarr

I do woodworking because I enjoy it... it's a hobby of mine, one of many... there are no time constrains, no budgets, I'm the boss... whatever I build will take as long as it takes and cost as much as it cost and no one can tell me any different! :)

Re: leaving WC

#20

Re: leaving WC

Larry Clinton At Frankfort, (Central) Indiana

Joe, like many others I have read your posts with interest. I would certainly hate to see you leave. I read all your posts on the chair work, didn't comment as I haven't built any, have repaired several, but don't have any interest in building them. I do enjoy your posts and hope you change your mind. I haven't been too active in my shop this year as I have had some health issues that are now clearing up - so hopefully I can finish some projects soon. Maybe you just need a break, good luck.

Re: leaving WC

#21

Re: A beak is good & got me back into model trains

RobCarr

After a break of about 30+ years I now have a 10'x12' model train layout in a spare bedroom... as a kid, along with the help of my father, I had quite an extensive layout in our basement, but eventually grew tired of it and ended up box it all up and packing it away... well 2 years ago I thought it might be neat to have a train running under the christmas tree and well, I had so much fun with it that it got me fully back into the model train hobby... never thought it would, but here I am! :

Re: leaving WC

#22

Re: leaving WC

Joseph Mulherin

Thank you, Larry, I got a second wind and went back aqnd drilled the le4g and arm holes for the spindles, mounted the spindles in dry to the seat and arms so I could get a b3tter perspective....and it did re3fresh me to finish both of them. Have the other seat already for final sanding and drilling of holes, have made the arms and rockers too for both and they all do fit rather well dry. Still have to build the steam box and bend the headboards. Back seat designs are cut and sanded, splats are made, have to drill the holes for them yet in seat and headboards before steaming. Have to buy some more material to make the other spindles.

I used Charles Neil's method for scooping out the seats using the dado blade setup....it worked out real good and I used Barry Irby's suggestion of setting a stop block so I did not go past the line of the rear of the seat cove.....worked out fine. And using the Saburr carbide donut yesterday morning let me make the coves in the seats and still have to smooth out the gouges which inevably occur when using those tools. Am going to be buying some cabinet scrapers to smooth out better.

All in all, guys and gals....I got my perspective back in tow and shall stay here on WC, contribute as I can.

Thank you ALL..... Joe

Re: leaving WC

#23

Re: leaving WC

Jim Dillon

Joe,

I think, especially as I get older (I'm almost 69), I have periods of greater productivity and enjoyment, and periods when much greater effort must be summoned to complete (or even start) a project. You sound like you are at a low point right now where a break, suggested by many others, might be really worthwhile. I would use the time to reflect on the positive, especially all that you have accomplished, including building a nice shop that you are obviously proud of. Not to mention, turning out beautiful woodworking. While I hope that you will not cut your ties with WC, as we need someone with your vast experience in many areas to help out, I would understand if you just wanted to "tune-out" for awhile. If you do, I hope you won't stay away too long.

Jim

Re: leaving WC

#24

Re: leaving WC

Joseph Mulherin

Thank you, Jim, I am 77+...next is may 22nd for #78. I have been doing woodworking since 1977 and have made many projects for the family and for our own furnitures.

These rocking chairs I am designing and building I thought would one each would go to some family member so they would have something I had made aqfter i am gone from this crazy world. I just got myself into a snit after some words with the wife and sort of w2ent 'outbound" to outer space I guess.

I have "landed" and am going to stay on WC and contribute to the conversations as I can.

Re: leaving WC

#25

Medications

Bruce, a MN Galoot

I know you said that your health situation is under control, but the medications you take can have a significant effect on your mental outlook. I'm speaking from personal experience. I was taking a very common medicine that had a profound effect on me -- joint pain, muscle stiffness and as my brother said it it just made me feel old. Doing anything at all was just too much trouble. I stopped taking that stuff two months ago and I feel much better. Projects are beginning to have much more interest for me. It can change your outlook significantly.