Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

leaving WC

Posts

Re: leaving WC

#51

Re: You're a better man then me

Joseph Mulherin

Tuesday afternoon here in CA, just finished turning my last dowel for the chairs....except one, and I ran out of wood to do it. But, I have enough done to put together at least one chair totally, make some minor adjustments etc, see if it looks good enough to go ahead and glue up. If it is, then I can also put together the other chair and install that last dowel in the leg area anytime. Am taking a couple days of rest.

Re: leaving WC

#52

Re: You're a better man then me

Joseph Mulherin

Yes, people, I do have my perspective back....thanks for the wonderful thoughts and concerns. As far as having any medical problems...yes I do have RA, and kidney problems, but I have to do something to keep my sanity in this world and woodworking has been my salvation for 35yrs.

I find it gives me a sense of fulfillment to think of something...some furniture, and make it come to life.

These chairs are a first for me but I want to have my relatives have something I have made after I am gone, and a rocking chair seems to be the best for reflections and membrances of past family members.

It has been only 6 weeks since I first got the idea to build these chairs....now the two are ready for assembly....and I shall try to post some pictures....if I can learn enough on how to do it.

Using Charles Neil's method of sculpting the seats was an enlightening idea and I shall do the other seats the same during the next year....and chairs are Xmas presents...so I do have some time to do and finish them.

Re: leaving WC

#53

Re: You're a better man then me

Joseph Mulherin

Did a little sanding on the rockers, arms, back design and splats. Also, am cutting the bottom of the seat at a 22 1/2 deg angle just below the upper portion of the seat proper, then will finish sanding with my new

HF multi-sander to get the final curvatures smoothed out nicely. Then I shall fit all of the pieces together DRY and see how it looks...if OK to my standards then I shall glue it together. Haven't decided on what will be the finish colors yet, but Minwax is available and did nice for me on other projects. Still have the headboard to work on though.

Re: leaving WC

#54

Re: You're a better man then me

Joseph Mulherin

Well, today I brought the chair parts out to my table beside my computer desk; sanded the tenons a little, fit the parts together nicely, took some pictures, but I am frustrated in knowing how to send them out with these new fangled cameras!!! Am using the Kodak Easy share program with the M340 camera.

Still have to make a few more dowels spreaders for the legs and then glue up what I have. Seat needs some filler to smooth out better(first seat done) then sand evenly.

All in all, I am pleased that my ideas for making the chair were correct...and very few errors during making.

These can be modified for the next chairs....easily. Using the Shopsmith 5-in-1 woodworking tool is the

best for me...just have to schedule my methods from one step to the next.

I tried using the Google Sketchup program, but it too is way over my head for understanding, so I do my postervoards and 1/4" paneling for patterns cut on the bandsaw....tried and true.

Re: leaving WC

#55

Re: You're a better man then me

Mark

Keep going Joseph ...thanks for the updates....can't wait to see the pics...cause you can and will figure out how to post them...not so quick as I would like on that stuff myself.

Re: leaving WC

#56

Re: You're a better man then me

Joseph Mulherin

Hi, Mark, well, I have decided that the Kodak camera is going back into the spare parts area. I bought a new Nikon last Xmas and shall try to take some more pictures with it and see if I can forward them to WC.

The Kodak Eastshare program would just not work for me any more and I could not download an update, so put it away.

Am redoing the spindles for the first two chairs to a design I made about 10yrs ago. Did about 12 the other day and just called it a day to quit for awhile. Have to buy some more spruce and remake the front and side spreaders....later.

Re: leaving WC

#57

Re: You're a better man then me

Joseph Mulherin

Bought some4 more spruce...1"x4"x8ft. Will cut to lengths and redo all of the spindles.

Used one of them to make some patterns for my lathe duplicator...drew them out, will bandsaw to shape and sand till Spruce turns real well for me and I sand with 80 grit lightly to smooth out. Will have to redo 24 turnings for Shall try to send pics soon.

Re: leaving WC

#58

Re: You're a better man then me

Barry Irby

Joseph, I have he Kodak Easy Share software and camera. (Who ever named it EASY SHARE has a mind that does not work like mine.)

If you load a picture from the camera into the computer through the dock you can put it into a folder, lets call it Chairs. Then open the picture in the program and you can edit it. I often crop it by using the Crop tool or the Free form crop tool. Then go to the upper left and do a "Save As" and you can name the new picture lets say Spindle for Wood Central and at the bottom of that little screen you can choose to Resize the picture and choose Best for Web and then save and put both the original and new picture away. (Before you Save the program has both the old and new open.)

Then from Wood Central You can post a picture by clicking on "upload Embedded File:" Browse through your photos until the one you want shows up (Spindle for Wood Central), click on it and it will show up in the message.

I think the picture has to be less than 80 kb. and you can check that by opening the picture and clicking on "Properties". Cropping the pictures helps me get under 80 kb.

There are many other ways to do this, most of them probably better, but I have not learned and keep struggling with this crap software. Works for me, but just barely. Might be better if you learn how on your new Nikon. (Kodak has stopped making cameras.)

Re: leaving WC

#59

Re: You're a better man then me

Joseph Mulherin

Barry, the software did something which I could not get around and fix...and could not download an update either, so into the spare parts. I am going to be using the new Nikon camera which I found out does work for me.

I am in the process of turning the new dowel spindles...made the new patterns on 1x2 stork, bandsawed the patterns into the stock and started to do the spreaders...am using the Shopsmith duplicator and it does nice work for me. Legs and arms spindles, the seats, the back designs and splats, the rockers, the arm rests...all done and just need to finish the spreaders. Will assemble dry and take a few pics and try to send them to WC so you guy/gals can see what I have been doing. If things look and feel good I shall glue up .

Re: leaving WC

#60

Re: You're a better man then me

Joseph Mulherin

Today I am in the process of glueing up the first chair. Tried to assemble dry, but pieces kept falling off, so am glueing up. Will try to take some pics and send soon. I do like the design of the rocking chair I made, but will probably use a different design for the back center in the later chairs.

Re: leaving WC

#61

Re: You're a better man then me

Joseph Mulherin

I tried to make and send a couple pictures of the first chair, BUT these programs for these cameras befuddle me on how to use them.

Re: leaving WC

#62

Re: You're a better man then me

Joseph Mulherin

Well, I glued up the first chair....found out some mistakes I made, but will save this chair to remind me of what i need to do for the other chairs to make them correct....can correct later. The back design is also going to be remade thicker. Will turn some more dowel spindles and try them on the second chair.

These chairs are my first in trying to do this type of woodworking...interesting...but it keeps me active and gives me something to do in this infernal retirement.

Re: leaving WC

#63

Re: You're a better man then me

Joseph Mulherin

Am remaking the legs, arms and spreader spindles to another design than the first ones. Cut the rockers off, redrilling, installing new leg spindles and spreaders; then am going to be redoing the arm spindles too.

Also remaking theback seat design to a thicker material(seem a little flimsy to me when I sat in the chair).

Hey, this is my first one and problems do come up...but they are being corrected.

Stiil do not know how to send pictures to this site.

Re: leaving WC

#64

Re: You're a better man then me

Joseph Mulherin

I cut up the parts of the chair and made some changes. The only part I am really saqtisfied with is the seat....done using Charles Neil's method of using a dado blade and donut sander and angle grinder.

Made some new spindles and spreaders and legs, glued up everything into rockers and arms. Will put them into the seat tomorrow. Chair back is being redesigned to thicker material and different design.

Second chair is about ready to assemble too.

Re: leaving WC

#66

Re: You're a better man then me

Joseph Mulherin

Thank you, Bruce, I viewed and read all of Jack Guzman's words and the other guys comments on his "practice chair". In my first chair I too noticed that the arms were too close and a person had to squeeze into the seat.... so that is main reason I cut apart the chair into individual parts and remade the entire chair all over again. I shall try to go to the Turning section more often.

Again, thanks for the tip.