Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

My Grex 23 ga. pinner is having problems

Posts

My Grex 23 ga. pinner is having problems

#1

My Grex 23 ga. pinner is having problems

Yonak

Recently it has gotten finicky about operating. I pull the trigger and nothing happens .. just hissing. I tried disconnecting and re-connecting the air supply and changing the air pressure, but sometimes it works and sometimes it doesn't. Has anyone else had this problem and found a solution, or is it time to replace it ? It's not really that old .. probably 3 years, but reasonably heavy usage.

Re: My Grex 23 ga. pinner is having problems

#2

Re: My Grex 23 ga. pinner is having problems

del schisler

Do you put a couple drop's of oil in where the air hose goes on ??? If not this could be the problum. Try that. If not their is a diaphragm that could be bad if air come's out with out the trigger pulled ??

Re: My Grex 23 ga. pinner is having problems

#3

Re: My Grex 23 ga. pinner is having problems

Yonak

Yes, del, I'm diligent about always oiling it after using it. If it's the diaphragm is that repairable ?

Re: My Grex 23 ga. pinner is having problems

#4

Re: My Grex 23 ga. pinner is having problems

Joe Shelton

Yonak, mine is a Senco, not a Grex, but I had the same-sounding problem and it was due to a broken seal at the trigger valve. Many manufacturors supply rebuild kits for such problems. There may be someone on the 'Messages' forum with better insight than mine.

Joe

Re: My Grex 23 ga. pinner is having problems

#5

Uh, sorry. I'm not lost, I'm just

Joe Shelton

temporarily misoriented.

If I'm not back before I get here, somebody pop smoke so I can identify...

Joe

Re: My Grex 23 ga. pinner is having problems

#6

Ellis Walentine

Gotta remember that one, Joe.   


Re: My Grex 23 ga. pinner is having problems

#7

Re: My Grex 23ga. pinner is having problems

Barry Irby

I have a number of nails guns and have had some of them for thirty years. There is a local shop I take them to to have them rebuilt once in a while. Not sure why I don't do it myself. Perhaps the cost was so reasonable I did not want to bother. Either get a rebuild kit and DIY or take it into a local shop.

Re: My Grex 23 ga. pinner is having problems

#8

Re: My Grex 23 ga. pinner is having problems

del schisler

sure go here and see if you can find the model number. Even if you don't get parts from them you will at least know what is inside. Or order the rebuild kit ? good luck

http://www.ereplacementparts.com/search_result.php?osCsid=c1o8auk447p5pc0feddgernu71

Re: My Grex 23 ga. pinner is having problems

#9

Re: My Grex 23 ga. pinner is having problems

Larry in nw ohio

We had this same thing and sometimes if we would disconnect the hose and then hold the trigger in and then reconnect the hose it would take care of it. If that didn`t work we had to rebuild it. Good Luck. Larry

Re: My Grex 23 ga. pinner is having problems

#10

Thanks everyone


Re: My Grex 23 ga. pinner is having problems

#11

Re: My Grex 23 ga. pinner is having problems

Alan

I had something similar happen earlier this year and it was a bad o-ring. I called Grex and their support was awesome. They sent a new o-ring, talked me through the install and it worked great. One thing I learned was that you shouldn't oil it every time you use it. A lot of the time this problem is related to over oiling. Anyway, good luck.

Re: My Grex 23 ga. pinner is having problems

#12

Re: My Grex 23 ga. pinner is having problems

Yonak

Alan, I called Raymond at Grex technical support and I had the same experience you did. He couldn't have been more helpful. He was on the phone with me for probably 25 minutes helping me examine the problem and the gun. He decided it is an "O" ring and he's sending me a replacement, gratis. Terrific customer support.