Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

OT- PC locks up

Posts

Re: OT- PC locks up

#26

Re: OT- PC locks up

Philip Duffy

Well, here is the very unhappy ending. HP called to day, from the "escalation dept." -- -whatever that is. The lady from HP stated unconditionally that HP would not fix the PC. Reason; I have only phone support warranty. Never mind that all this started while the PC was still under full warranty- - that seems to be irrelevant in my case. I have to wonder how many people get steamrolled every year by bogus warranty's from HP. NEVER AGAIN WILL AN HP PRODUCT CROSS MY DOOR. I will say thanks to all the good hearted woodturners of the world and the fine suggestions offered. Perhaps one of them will fix my PC which, given the HP attitude is saying a lot. Thanks for listening. Phil

Re: OT- PC locks up

#27

HP

Jerry Nicholson

I have recommended HP desktop and laptop computers to people for several years but I recently decided that HP's quality and customer service has deteriorated to the point that I can no longer do that. Unfortunately, the rest of the pack isn't much better and some are a lot worse. My sister just bought a new Toshiba laptop computer on my recommendation so I will see how that turns out. She has already said that it took her hours to get it set up the way she wanted it. I have been building my own desktop computers for many years, a new one about every 2 to 3 years, and this has worked out to be very satisfactory for me. It's not cheaper than buying one though.

Back when I dealt with HP on a professional basis, I believed that they were the very best. Things have changed.

Jerry

Re: OT- PC locks up

#28

Re: I have to agree with Dan

Bill Howatt

I build my own and I have worked on various other "brand-name" boxes for friends. While I haven't worked on the full spectrum of machines from any vendor, the ones I have worked on like Dell and HP were too proprietary for my desires. If one of my machines has a motherboard failure I could easily replace it at a reasonable cost - not so with the brand-names.

I have also found their BIOS settings to be limited as a rule.

I realize my approach certainly isn't suitable fore everyone.

Bill

Re: OT- PC locks up

#29

Re: HP

Philip Duffy

Sadly, Jerry, it seems you are totally correct. I have yet to write a letter to the Pres. of HP but he will be hearing from me. Thanks for your support. Phil

Re: OT- PC locks up

#30

Re: HP

Larry in NW OHIO

You can write all the letters and I`ll bet you when he reads it, if he even does, he`ll just laugh all the while on he`s way to the bank with his multi million dollar salary. Larry