Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E Peacock

28 Mar 2011

Good Morning,

It's been a hectic week for me with family issues, work schedule being what it has suddenly turned into. Maybe I should take up the career of being a caveman instead.

Well, the MIL thought the wooden forks were pretty cool but the design was a bit out of the ordinary. That's what she "thought" until she tried one of them to take some kraut out of a jar and it worked better than a standard kitchen fork. She fell in love with the little kraut fork right then and there.!!!

I have a lot more wooden kitchen utensils to make but I've had so much going on that I haven't had time to get in the shop. I was supposed to go my Joe Measle's house last night to borrow his scroll saw but due to family problems at the time, I never made it to his house.

Tomorrow is the LOML's birthday....so I've got to get busy making plans to celebrate her birthday...so off I go.!!!

So what did YOU do this past weekend?

Best of weeks to you all.!!

Dennis Peacock

Re: WC Weekend Accomplishments.....

#2

Re: WC Weekend Accomplishments.....

Thomas S Stockton

The weather has been pretty nasty for the last couple of weeks. This weekend it snowed some and rained lots, today the sun is out. Saturday we did our weekly shopping in town, on our way back it started to snow some really slushy wet stuff, I turned of the highway onto our road and it didn't seem that slippery. I was going pretty slow and just as i finished asking the wife how far do you think we can make it with out 4wd the truck started to head towards the drainage ditch on the side of the road. Ended up in the ditch and thought for sure I was stuck but put it in 4wd and backed out. I would much rather drive in 8" of fresh snow than a couple of inches of slush anyday.

Sunday I just hung around and read a book it seemed to downpour all day.

Tom

Re: WC Weekend Accomplishments.....

#3

Made it to Frank Miller Lumber....

roger lance

finally got on the road and drove from Grand Rapids, Michigan to Union City, Indiana to buy some QSWO at Frank Miller Lumber....to anyone thinking of making this trip, stay on the interstate as much as possible....the more direct two lane blacktop just travels to too many small towns and past too many police speed checks....after Fort Wayne, its 28 thru Amish country and a stop at the McDonald's in Berne was unique for the hitching post area in the back of the parking lot where you can leave your horse and buggy while you enjoy a Big Mac....FML itself was very impressive....that's a BIG operation and well worth a tour if you've got the time....the staff at the Retail Outlet were very helpful and friendly (and didn't hold it against me being from Michigan)....despite 10 hours of driving round trip, I'll be going back there again.

Re: WC Weekend Accomplishments.....

#4

Jim in Burlington Ont.

Re: Made it to Frank Miller Lumber....

Jim in River Oaks, Ont.

FML is my favorite place to by wood.

I come down I-75 and cut across before I get to Dayton, about 7 hours one way, I over night sometimes on the way back, usually in Perrysburgh Ohio.

Take care,

Jim

Re: WC Weekend Accomplishments.....

#5

Re: Made it to Frank Miller Lumber....

roger lance

Jim....I believe I remember you from either Badger Pond or a few years back on this site....you posted pictures of a great bench you made and I've wanted to return that favor with pictures of a bench I made about the same time (except I'm electronically challenged and don't know how as yet to post pictures....but I've got this new puter and hope to learn soon)....I was struck at the time with the similarity in size etc of the two benches....I was inspired by The Workbench Book and built a mostly Shaker style bench but used a Record 53E and Record metal screw for the vises....I seem to remember you used wood screws and that was really a great look....take care....hope to make that posting relatively soon....and, if you want, post your bench again....its a real treat !!

Re: WC Weekend Accomplishments.....

#6

Re: Made it to Frank Miller Lumber....

Andy Lincoln,in Dearborn MI

Jim,

You are gonna have to give me a heads-up next time you make the trip.I am only about 15 mins away when you cross the border into the states.I'd love to meet face to face and discuss woodworking and hockey over breakfast/lunch/dinner.

Andy

Re: WC Weekend Accomplishments.....

#7

Jim in Burlington Ont.

Re: Made it to Frank Miller Lumber....

Jim in River Oaks, Ont.

Hi Andy,

I would really enjoy that, thank you. I was down last spring, it's almost time to make tracks again.

Take care,

Jim

Re: WC Weekend Accomplishments.....

#8

Jim in Burlington Ont.

Benches... *LINK*

Jim in River Oaks, Ont.

Thanks Roger,

Yes, Badger Pond, it was awhile ago, a great time and place for many of us to become good friends, WC has taken it a step up from then too.

I would dearly love to see your bench as well. You are very kind to remember mine, it was and still is one piece I am most happy with. Of all the tools I use my bench is my favorite, it's been through many many projects since I finished it in 2003 and I enjoy how it's performed, there is nothing I would change about it.

The link below takes you to a shop shot of its build.

Take care,

Jim


My Shaver/Shaker Bench

Re: WC Weekend Accomplishments.....

#9

Re: Made it to Frank Miller Lumber....

Larry in NW OHIO

Jim The next time you go, and you don`t mind, I`d like to meet up with you also. I could meet you in Lima or Findlay, Ohio or somewhere else along 75. I live just a few miles from it. Also if you would want some company I haven`t been to FML for a couple of years. Larry

Re: WC Weekend Accomplishments.....

#10

Jim in Burlington Ont.

Re: Made it to Frank Miller Lumber....

Jim in River Oaks, Ont.

It would be my pleasure Larry,

I like to do that, I like to travel with Jazz the Wonder Dog, so you might have to share a seat. :D


Take care,

Jim

Re: WC Weekend Accomplishments.....

#11

worked and watched it snow

Gary Camp, Bend, Oregon

Thomas, I hear you about the slush vs. snow. At work we got 29" in less than 60 hrs with 12 last night we were up to 170" this morning. Only woodwork I've done at home has been splitting and hauling firewood. Thank goodness it's Friday, I might get to work on the barn some, it's carpentry but at least it's wood. I will be hauling hay too, 4 tons 100 lb bales oh joy.

Re: WC Weekend Accomplishments.....

#12

Re: WC Weekend Accomplishments.....

Jon

Finished a TV stand. I had made the component shelf in 2009, but it placed the TV too high off of the cedar chest it was sitting on. Designed a squat table with drawer, and finally got around to building it last month. Stuck it in place last night.


img

Re: WC Weekend Accomplishments.....

#13

Re: Made it to Frank Miller Lumber....

Larry in NW OHIO

Jim That sounds good, I love pets, he is a pet and not a guard. By the way, if you ever get down this way for some other reason, stop in. Your always welcome.Larry

Re: WC Weekend Accomplishments.....

#14

Worked Wood!

Mark Mandell - Gone Round In Jersey

With Clint Searl's kind offer, I got the maple slab for Memsahib's TV cabinet trimmed [Thanks Clint] in his shop. Also got the cook's tour of his place and the items in his portfolio. If you get a chance to shadow his doorstep, by all means do so.

Then back to my digs. The cabinet was assembled and put in place on Saturday and I then spend the evening with the slab and the Performax completing the thicknessing and sanding. Sunday morning and the first coat of sanding sealer is applied. After the second coat was applied and lightly sanded, the slab went up and was added to the cabinet, followed by trying to remember which wire went where to make sound and pictures.


Upshot is everything works! Have to make some black shelves, and then I'll be waiting until the weather warms enough to do the final finishing with the HVLP and waterbornes. 'Tween now and then I'll be deciding whether to lower the floating slab by a 1/2" to 3/4", and whether to add a 3/4" piece of maple bottom trim.

Re: WC Weekend Accomplishments.....

#15

Re: Worked Wood!

Jon

I appear to be well behind the cresting wave of technology. Nice component rack.

But wait....I did model my small pine stand in SolidWorks and rendered it....that's gotta count for a couple of extra coolness points!


img

Re: WC Weekend Accomplishments.....

#16

Cool

Mark Mandell - Gone Round In Jersey

I'm still stuck on keeping a sharp pencil.

You incorporated what I couldn't, the drawer for media(?). Nice job. SWMBO's just going to have to use the bookcase for her CD's and DVD's. [he said with all the conviction of a smoker quitting for the first time]

Actually the design was a nice break for me as I've been "stuck" doing Stickley take-offs for about 4 years. The slab top element is predicate for the new coffee table. I made the mistake(?) of taking her through the Nakashima studio and gallery in New Hope, PA. "Oh, I'd like one of those, and several of those, and wouldn't THAT look great in the rec-room, and . . . ." :O

Consequently, next Saturday will be spent at Willard Bros. to pick out the slab she wants for the coffee table.

Hey, what are credit limits for anyway? :\ :D

Re: WC Weekend Accomplishments.....

#17

Clint Searl

Re: Worked Wood!

Clint Searl

Thanks for the compliment, Mark; glad I could make a little contribution to your fine work and enjoyed the visit. I like the height of the floater. :)

Clint

Re: WC Weekend Accomplishments.....

#18

PS

Mark Mandell - Gone Round In Jersey

Left off the corner detail pic. Was lucky to be able to align an inclusion in the slab with one of the epoxy-filled voids in the walnut leg.


Re: WC Weekend Accomplishments.....

#19

Re: Cool

Jon

Yes indeed, the drawer is deep enough to stand DVDs and Tapes edgewise so you can read the spines. I'm sure when I get home tonight it will be loaded-up with the collection.

Stickley furniture. Do you use white oak and fume it in ammonia? I seem to remember something like that. Back in the day I worked in a drafting room with a leaky blueprint machine. Now that wakes you up! Took some of the stuff home and used it on brassware that I wanted to antique.

Yes, I do ramble.


img

Re: WC Weekend Accomplishments.....

#20

Re:  Oak

Mark Mandell - Gone Round In Jersey

No. Memsahib prefers cherry.

She burns oak :D

Re: WC Weekend Accomplishments.....

#21

Re: Design

Mark Mandell - Gone Round In Jersey

The black shelves will subtract the present horizontal line elements. That's why I think the bottom trim may be needed. Thing about the slab is that if I lower it, I may have to shorten it by an inch or so to keep the composition on the beveled ends in line with the case. I'll send you a pic when I'm there. Your RAS ain't portable is it? ;)

Re: WC Weekend Accomplishments.....

#22

Re:  Oak

Jon

You are a mortise and tenon guru (or is that glutton). Very nice.

Re: WC Weekend Accomplishments.....

#23

Re: Cool

Larry in NW OHIO

Mark Credit limits are just a target to shoot for. Larry

Re: WC Weekend Accomplishments.....

#24

Target

Mark Mandell - Gone Round In Jersey

I must give her her due, she's way tighter with a buck, paper or plastic, than I am.

So, since all the "brackets" are blown, here's a little WC contest

Given that the coffee table will be from 33 to 36 wide by 53 to 58" long in a slab with natural edges and at least 7/4 thick . . .

How much is that honker gonna cost me? I'm betting she going to see some feathered crotch and I'll be lucky to get out of this little shopping trip under $800. That is, unless they pull out the quilted Bubinga :O :O

Re: WC Weekend Accomplishments.....

#25

Clint Searl

Re: Design

Clint Searl

Sorry, it's stuck to the wall. I kinda like the overhang; it adds interest.

Clint