Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Knife block finish?

Posts

Knife block finish?

#1

JL

Knife block finish?

JL

I've never made a knife block - though I have one that the LOML bought years ago.

As I'll be making a large one - what would be a good finish?

I'll be making it out of cherry or maple.

Re: Knife block finish?

#2

How about ...

Mike Farinella

just a wax and buff?

Re: Knife block finish?

#3

Moses Yoder

Re: Knife block finish?

Moses Yoder

I would shred some beeswax and add mineral oil then melt the whole mess together, allow to harden and then wax your knife block with the mixture.

Re: Knife block finish?

#4

Knife block finish problems

Bill Tindall

I made one and finished it with conversion varnish for durability. It looked especially good for a while but a problem showed up with time. The knife slots are on the end grain which is oriented vertical such that knives "drop" into the slots. This banging of knife bolsters onto the hard end grain finish has over time scarred the finish and it is coming loose in high impact places. While the sides of the block look good, this end doesn't. It may well be that any hard finish would not hold up on this end grain situation. Clearly an oil or wax finish would have performed better on this end grain.

Re: Knife block finish?

#5

Re: How about ...

George Koch

Mineral oil, same as cutting boards.

Re: Knife block finish?

#6

Re: Knife block finish?

roger lance

just made a knife block in hard maple to go with a new cutting board....used mineral oil on both and like the look....Woodcraft sells butcher block oil (mineral oil) and ,to my surprise, mineral oil is available in your local pharmacy in the laxative isle (so you know it's food safe).

Re: Knife block finish?

#7

Clint Searl

Re: Knife block finish?

Clint Searl

Each of my knives has its own scabbard. No finish necessary and no clutter on the counter.

Clint

Re: Knife block finish?

#8

Here's my version, Clint

Tom Pilsbury (Chicago)

Cardboard and duct tape. No finish necessary. :D


Re: Knife block finish?

#9

Re: Here's my version, Clint

Larry in NW OHIO

Good thinking, Tom. This way when you aquire a new knife then you will need to order a new tool to get the cardboard to make new scabards for them. Good Thinking. Larry