Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Shop electrical plug height

Posts

Re: Shop electrical plug height

#26

Actually...

John in NM

"The National Electric Code used to specify no more than 6' between outlets along walls. I'd use that as an absolute bare minimum"

I believe the specification is that no point along the wall shall be more than 6' from an outlet, which makes for a 12' minimum (working from memory here, might need a RAM upgrade :D). Fine for a residence, but a bit scarce for the average shop space.

Re: Shop electrical plug height

#27

Re: Actually...

Barry

One outlet every 12' is really pretty minimal. Not even okay in residential in my opinion, certainly not in a shop. I think a 12' wall ought to have about three 110 outlets and a 220.

Re: Shop electrical plug height

#28

Re: Shop electrical plug height

FredD

A Electrical Engineer who designed Lighting systems once told me , not to have fluorescent and incandescent on in the same area you are working in, because the different flicker rates were hard on your eyes.

I have followed that advice in every shop I have owned.

Fred

Re: Shop electrical plug height

#29

No argument there...

John in NM

Just clarifying the code reference :D

Re: Shop electrical plug height

#30

Jason Roehl in Lafayette, IN

Um...

Jason Roehl in Lafayette, IN

Incandescent lights flicker?

News to me, considering they glow for a significant amount of time after being turned off.

Jason

Re: Shop electrical plug height

#31

Actually they do...

John in NM

At least when powered by AC rather than DC current. Basically the light is turned on and off 120 times a second, giving a flicker rate of 120 Hz (since the incandescent bulb doesn't care if the current is + or -, so there are two "ons" for a 60 Hz AC). The latent glow of incandescent bulbs likely buffers this somewhat, like a capacitor smoothing out rectified AC if you know what that graph looks like - just substitute light intensity for voltage.

I don't know the flicker rate of a fluorescent lamp, presumably higher.

I don't find mixing the light bothers me at all, but sensitivity likely varies a great deal.

Re: Shop electrical plug height

#32

Consider Ceiling Retractible/Pull Down Outlets

George Colonel's Workshop-Havertown PA

Hello Mike,

I,ve had my shop wired every four feet with duplex 117 outlets. 20 amp breakers. About two tools per breaker. I run only one tool at a time, but systems works ok with multiple operations. However repositioning tools due to shop space is handy using pull down power cords. I use one and it reaches all over main shop. A real convenience.

George

Re: Shop electrical plug height

#33

Jason Roehl in Lafayette, IN

Yes and no.

Jason Roehl in Lafayette, IN

Yeah, I did some poking around on the interwebs after I posted that, and what I found was that "flicker" due to AC is imperceptible to the human eye--it takes extremely sensitive, calibrated equipment to even detect it. The only flicker that IS potentially a problem is due to irregular voltage fluctuations from the power company.

Jason

Re: Shop electrical plug height

#34

Re: Actually...

FredD

I meant to say , it is 12' Minimum or at least was, Thousands of Houses wee wired that way on the west coast.] and it came out six foot.

I had the reason right , it was or is because Lamp fixture come with only a six foot power supple cord and rip cord at that.

Beyond that if you had to work with inspectors everyday , you soon learned that some counted a Glass Patio door as wall ans some didn't.

FredD

Re: Shop electrical plug height

#35

Read the warning labels before buying

Bill Houghton, Sebastopol, CA

I've picked up a couple of those coiled-cord retractables, and the label on at least one warned that you need to uncoil the entire cord every time - apparently, the coil is small enough when it's retracted to create a field, when electrons are flowing, that will heat the cord up beyond its rating.

Re: Shop electrical plug height

#36

Re: Shop electrical plug height

Bill Turpin in WNC mountains

The flicker of flourescents can create a strobe effect that will stop the "movement" of a saw blade. I have both inc. and flour. over my three lathes and the tablesaw. I have not experienced any eye problems.

Re: Shop electrical plug height

#37

Patio doors?

John in NM

Good grief :D

Re: Shop electrical plug height

#38

Re: Read the warning labels before buying

George Colonel's Workshop-Havertown PA

Good Afternoon Bill,

I'm out of the shop and caN'T REACH my ceiling unit to check on mine. I've been using it for nearly six years every day. Hardly ever stretch the cord more than 15 feet of the 20-25 feet available. No problems. Good advice though, for sure.

George

Re: Shop electrical plug height

#39

Re: Read the warning labels before buying

Bill Houghton, Sebastopol, CA

Of course, it depends on the amperage of the tool, too - small sanders, for instance, usually draw only a couple of amps, and the resulting field would be weak.

I don't have any direct experience with this being a problem - I simply wanted to mention the possibility. It won't stop me from installing the retractable cords I've got in storage when I get a sufficient round tuit supply :D

Re: Shop electrical plug height

#40

Re: Read the warning labels before buying

Larry in NW OHIO

The thing about coil up cords that coil up into a little container and not the coiled cord, is that they need to be totally pulled out to be in the open air. This is the same as a house sweeper, they are a small wire and that is how they can do it because they will be "open air" wire. Thr heat that is created from the amps that are being pulled, and the heat created on the wire, will dissapate into the open air. Larry