The Duct Tail Joint
Moses Yoder
I recently came to the conclusion that we should throw out everything we have learned about woodworking for the past 6000 years and start over again. We really should burn all the books and start afresh.
I thought about revising all our joints to make them meet modern standards, using modern materials. One joint came to mind which is kind of the epitome of joints and has been around for a long time, the dovetail joint. I decided to consult with my cousin Jed Clampett. He is a very wealthy man now and lives in Beverly Hills so his advice must be worthy of consideration. I asked him about the best way to join two boards together. He responded with great wisdom and said "All you need is some o' that there good duck tape." I asked him how he assembles the board and he said you just set two board together, put one strip of duct tape on the inside, then for good measure put another on the outside.
This immediately made good sense to me. Why build something to last for 15 or 20 generations when I am only going to live another 30 years or so. Why spend 15 minutes hand cutting a dovetail joint when I can execute the Duct Tail joint in 15 seconds? Plus, the Duct Tail joint is easily repaired. If it comes apart, you simply remove the old duct tape and put on new. Makes perfectly logical sense in todays modern world with modern materials. Cousin Jed claims there is a company whose name starts with Ik something or other that uses this joint with great success in most of their furniture and people buy it up like crazy.
So there you have it; the Duct Tail Joint.
Caveat Emptor; I think that is Latin for something like "Throw out everything you know and start over." You might want to look it up at dictionary.com





