Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Jig Saw recommendation

Posts

Jig Saw recommendation

#1

Jig Saw recommendation

mamc

Bosch ? Barrel grip or Dewalt jig saw... any thoughts?

I have an old Sears craftsman piece of #$*&^% that supposedly had a rotating counter balanced blade...the only thing it is good for is cutting off the line even if you lock in the blade rotating thingy.

Not an frequently used tool for me, but when you need it you need to cut straight!

Re: Jig Saw recommendation

#2

Re: Jig Saw recommendation

Jim Dillon

I've been very pleased with my Bosch with handle. I've had it for maybe 13 years and it is still going strong. I use it mostly for breaking down thick stock and plywood to a more managable size. I haven't tried the newer Bosch blades as I stocked up during a sale quite a long time ago, but they are supposed to be quite good. Hope this helps.

Jim

Re: Jig Saw recommendation

#3

Bosch Barrel Grip for sure

Lee Schierer McKean, PA

I love my Bosch Barrel grip jig saw. I used it just this past week to cut a straight line using an edge guide to free a corner piece of plywood from a full sheet. The cut quality with the progressor blade was equal to that on my TS. You won't believe the difference between your Craftsman and the Bosch in terms of quality of cut and lack of noise and vibration. Blade changing is also very easy. My only regret is I didn't get one years sooner to replace my old B&D jig saw.

Lee

Re: Jig Saw recommendation

#4

Re: Jig Saw recommendation

Jim Pugh

I suggest you try holding a barrel grip machine before buying it. Some of us don't have large enough hands to grip it comfortably.

Re: Jig Saw recommendation

#5

agree, and... *LINK*

Grant in Iowa

I have the Dewalt, and while it is a fine tool, but I have used a Bosch and would trade mine in a heartbeat for one. I prefer top handle so I have a place for both hands to guide the cut.

Another thing to pick up while you are at it is the set of Bosch assorted blades. I think it runs $34 or so for 30 blades and will give you both a container for the blades, and a nice assortment that will likely last you several years.

Link below


Bosch woodworking jigsaw blade asst

Re: Jig Saw recommendation

#6

Smooth cutting blade

Lee Schierer McKean, PA

I prefer the Bosch T234X Progressor Wood Blade for nearly chip free cuts with a smooth finish in hardwood or plywood.

Lee


img

Re: Jig Saw recommendation

#7

Re: Smooth cutting blade

Joanne in Point Pleasant, PA

That's what I usually use in my Bosch top handle saw. Love that thing! I also use it for doing initial sizing of large boards (especially since I torqed my old circular saw).

Re: Jig Saw recommendation

#8

Re: Bosch Barrel Grip for sure

FredD

The Bosch Barrel grip saw is like the SkilSaw model 77 , the saw of choice in the construction and Cabinetry industry, I am on my second one and give one to the Shop Teacher at Abilene High every year for him to award to his most deserving student that year.

If your hands are normal size or smaller then some , by all means try the top grip model.

FredD

Re: Jig Saw recommendation

#9

Re: Jig Saw recommendation

Barry

I have a Porter-Cable that I have been quite happy with. I can't remember the model, but the base plate is fixed and does not tilt for angle cuts. How many times would you need to make an angle cut with a jigsaw? Really?

Re: Jig Saw recommendation

#10

Re: Jig Saw recommendation

FredD

Probably more often then having to "{glue a Bumper" back on your ride.

FredD