Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

New Woodworking Experience

Posts

New Woodworking Experience

#1

New Woodworking Experience

Thomas Skaggs, Foothills of Mount Level

Here's something I have not done in many years.....make something for my own house. Wow, what a novel idea! Seriously, it's been a very long time since I have made something for our own home. When you make furniture for a living you realize that making stuff for yourself is sort of a luxury and rarely have I had any time to do it.

I few months ago my wife and I bought a really unique Mid Century Modern home. The architecture lends very well to my style of furniture design and so I have had a lot of inspiration to make some pieces for the new place.

Business has been slow due to the economy so I have decided to block out some time to make things for our new place. The first piece is a very large dining room table. I call it the "Lodge Table". It is just over 9' Long.


The top is made from two slabs of curly walnut from the same tree. I left them natural edged but bark has been removed. The slabs are massive with lots of color and figure. I filled natural cracks with colored epoxy.


The support for the table is a trestle base. There are hidden supports under the slabs to give additional support and stability. There is a locking "through tenon" for the stretcher that is pegged and features Zebra Wood peg locks.


The slabs are natural edged in the middle. I shifted the alignment of the slabs so they fit nicely. I then connected the slabs with a series of staggered "stitches" of cherry wood slats.


Finally, I made a contemporary chandelier for above the table. It is made with three rectangular platforms of curly cherry. The platforms are connected with 3 arching forms of curly maple. The luminaries are made with hand blown Italian glass shades that I bought at an architectural salvage place. Took me quite a while to wire it all. It is suspended with stainless steel sail rigging.

So there you have it. The first pieces for our new home. I have more in queue. Currently I am making a cabinet piece and soon a master bed. Gosh, making stuff for us? It's actually fun!

Tom

Re: New Woodworking Experience

#2

Clint Searl

Re: New Woodworking Experience

Clint Searl

Beautiful work and I love the creativity. The stitches are cool. Outside-the-box great.

Clint

Re: New Woodworking Experience

#3

Mr. Skaggs, you are a master! Really nice work!

Stuart Hough

Re: New Woodworking Experience

#4

Jim in Burlington Ont.

Re: New Woodworking Experience

Jim in River Oaks, Ont.

Very nice Tom,

take care,

Jim

Re: New Woodworking Experience

#5

Thanks...a hand plane workout....

Thomas Skaggs, Foothills of Mount Level

Thanks! And interestingly enough, natural slabs do not equal less work. In this case they created far more work than had I gone with milled lumber. Takes a lot of work to plane such irregular timbers to be level together and have a smooth top. My machines got lonely a lot during this project.

Tom

Re: New Woodworking Experience

#6

Dale Lenz

Another great Skaggs creation!

Dale Lenz

Love it Tommy, but gotta ask about the stitches: Arn't you trapping the walnut wood? Would need to put a bucket under the table when playing poker, :">.

Really nice looking table, Tommy! Like how the base design goes with the top.

Re: New Woodworking Experience

#7

Re: Another great Skaggs creation!

Thomas Skaggs, Foothills of Mount Level

Thanks Dale,

The most important part od table tops like this is to allow for movement. This top, while attached to the base is done so to allow for movement. The "stitches" tie the two inner edges together but just move right along with the slab.

As for the poker chips....that's what a kitchen table is for. With this table we can brush our crumbs through the middle and let our dog clean up. ;-)

Re: New Woodworking Experience

#8

Jim in Burlington Ont.

Re: Thanks...a hand plane workout....

Jim in River Oaks, Ont.

and here I thought you were a belt sander kind of guy... :D :D :D

Re: New Woodworking Experience

#9

Dale Lenz

Just for clarity

Dale Lenz

I was thinking about where the cherry stitches are going across grain into the walnut, kinda like bread-boarding.

I'll agree, the pets will be hanging out under the table.

Re: New Woodworking Experience

#10

Re: New Woodworking Experience

Todd Nebel

The whole room works, table, light, and the cabinet (I assume you made it too). All are really nice!

Re: New Woodworking Experience

#11

Re: New Woodworking Experience

Jim Dillon

Tom,

The table is stunning and I recognize the wall cabinet from your previous posts; it goes really well with the table (and room). Like the light too and I have several questions. First, how did you handle the lighting? Are the lights 12-volt and connected to transformers hidden in the top, or 110-volt and hardwired to the wall. On my computer screen, it appears the lights are dimmer in the third photo. Are they on a dimmer? If so, the light must produce a gorgeous setting when dimmed. Thanks for the inspiration.

Jim

Re: New Woodworking Experience

#12

Re: New Woodworking Experience

Thomas Skaggs, Foothills of Mount Level

I struggled with the directions I could go with the lighting and decided to keep it simple with medium bulb bases and combinations of 40 watt and 7 watt bulbs. All the wiring was hard wired and soldered in the 3 trays and connected to a cable that could handle the load. It is eventually connected to Romex, fished through a wall to a dimmer. With low light the table and room look very nice.

Thanks for asking.

Tom

Re: New Woodworking Experience

#13

questions....

Bill Tindall

Thanks for the post. What I like best about WC are the projects people post. Its inspiration and motivation and just plain pleasant.

How were the stitches executed? And how is top fastened to legs. I am not a "leg man" but these are noteworthy!

Re: New Woodworking Experience

#14

Re: questions....

FredD

Over the top Thomas, the glass Chandelier is definitely a conversation piece.

I hope you don't have a guest gore themselves on the ends of it ;-))

FredD

Re: New Woodworking Experience

#15

Re: questions....

Thomas Skaggs, Foothills of Mount Level

Thanks Bill,

I cut the slots for the "stiches" with a plunge router and upcut spiral bit. I built a jig with stops to create the start and stop points and with a straight edge as a fence. The two slabs were temporarily secured in final position so that all the stitches would align properly later. The ends of each cut were round. So I squared them off with a chisel.

The top is attached to the upper arms of the trestle with screws through the arms. The holes for the screws are elongated to allow movement. There are 2 hidden stretchers between the tops of the trestles that provide added support to the top.

Tom

Re: New Woodworking Experience

#16

Alan Young

Re: New Woodworking Experience

Alan Young

Dude-The Table is a killer! Sure hope you don't make Donna dust that chandelier.

Carry on my wayward son.

Re: New Woodworking Experience

#17

Re: New Woodworking Experience

Virgil Johnson

Um...those edges of them top slabs ain't milled. Do you have a table saw and jointer? That is generally the third and fourth operation.

All kidding aside nice work.

Re: New Woodworking Experience

#18

Gorgeous! Beautiful! Wish I was there!

Joanne in Point Pleasant

To see it in person! Stunning table, Tommy. Very cool light idea. The tedium of wiring that has paid off. Now all you need are some guests, a fine wine, and a good meal to share in there. Thanks for sharing.

Re: New Woodworking Experience

#19

I really like the stitches...

John in NM

That is a really interesting treatment on the middle live edges, I like it a lot. Great job Tom!

Re: New Woodworking Experience

#20

tense!

Bill Tindall

That's what I would have been on the last router cut.

thanks for answers.

Re: New Woodworking Experience

#21

Jesper, Denmark

Re: New Woodworking Experience

Jesper, Denmark

You are an inspiration, Tommy.

Re: New Woodworking Experience

#22

No kidding

Thomas Skaggs, Foothills of Mount Level

I felt Murphy's Law approaching after each pass. By the last one I was a bundle of nerves.

T.

Re: New Woodworking Experience

#23

Re: New Woodworking Experience

gary peterson

table really stands out in the room, nice blend. Real comfy looking. Some day.....

Re: New Woodworking Experience

#24

Echo all the above comments!

John Pappas

Re: New Woodworking Experience

#25

Another question - stretchers

Henry (Raleigh NC)

Inspiring work - as always

I have a follow up question to your answer to Bill. You wrote "The top is attached .... There are 2 hidden stretchers between the tops of the trestles that provide added support to the top."

How thick is your slab? If it is not 'self supporting', what are the dimensions of the hidden stretcher?

I am building a somewhat similar but of course very different table - almost 10' long, trestle base. The top is reclaimed heartwood pine - 8 boards of 5" each for a total width of 40". I will use a similar cross piece at the top of the trestle to anchor the top, with screws in elongated holes to allow for expansion.

I am wondering whether to use an out of view lengthwise stretcher as you describe. With a 2" thick top the weight is considerable, but it is a also quite self supporting. Anything I consider for a stretcher would need to be as thick or more so than the top itself. I just can't decide whether this is necessary. My gut says no, but I want to be sure about it. What made you decide that you needed this?

Thanks for posting your always inspiring work.

Henry W