Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Shop Vac Questions

Posts

Shop Vac Questions

#1

Shop Vac Questions

Barry Irby

I bought a shop vac at Lowe's before Christmas. I think it is actually a Shop VAC brand and it is about 16 gallons and it was cheap, one of the door buster specials. I have really low expectations, but it was cheap so that's OK.

The problem is the hose. Its about an 1 1/4" and pretty stupidly designed. The fitting that goes into the tank fits inside the hose so that there is a shoulder and pieces of debris keep getting hung up on it, stopping up the hose.

I notice the fitting is a reducer from about two inch down to an 1 1/4". Is there a larger hose that would fit directly on the drum without the reducer?

Re: Shop Vac Questions

#2

Re: Shop Vac Questions

del schisler

go to lowe's or HD and check the replacement hose's. Their should be a 2" that would fit? I have one dont know the brand but the hose is 2". so their should be a 2" hose.

Re: Shop Vac Questions

#3

Re: Mr Nozzle

Chuck Lenz

Check them out, they carry high grade hose and fittings for car washes. fairly resonably priced too. I put one on my WAP vac and consider it a good investment.

Re: Shop Vac Questions

#4

Re: Mr Nozzle

Larry in NW OHIO

Chuck I went to Mr. Nozzel and all they had were places to go everywhere but a Mr. Nozzel site. Do they have a site of their own. They even had a site fpr printer ink. I hate sties like that I have a hard time finding anything especially what I`m looking for. Larry

Re: Shop Vac Questions

#5

Re: Here ya go Larry  *LINK*

Chuck Lenz

Click on the link below.


Mr Nozzle

Re: Shop Vac Questions

#6

JL

Will take a standard Ridgid hose...

JL

I got that one last Xmas also when I couldn't get the Ridgid at Home Depot.

IMO, it is not a good vacuum. I got it for the theatre and it really doesn't fill the bill.

Re: Shop Vac Questions

#7

Re: Shop Vac Questions *LINK*

Brint in Richmond, VA

Hey, Barry --

My ShopVac of 12 years died last month, and I bought two different Ridgid Vacs in a row (different models) from HD on Broad, but ended up returning both of them (the latter, even after I had used it. They said that was no problem -- I cleaned it up nice). I found ShopVac's website and was particularly intrigued by the 955-16 and the 962-16. The webpage for each model has links to where it is sold, and I ended up heading out east on 360 to Manquin to pick one up from True Value 360. Couldn't be happier.

Just FYI - YMMV.


Shop Vac 962-16

Re: Shop Vac Questions

#8

the problem with Shop Vac is....

Joe Shelton

the damned switches. They just won't last if you pick up any fine dust. I've sworn off Shop Vac; right now I'm fairly invested in Ridgid from Home Depot. But those Fein and Festool machines sure look good. If my wife's experience with Miele is an indication, I may drop some coin of one of those pricey Deutsche machine types.

'course, that would interfere some with some of my aspirations WRT Mike Wenzloff. What's a guy to do?

Joe

Re: Shop Vac Questions

#9

Moses Yoder

Re: the problem with Shop Vac is....

Moses Yoder

A little bit of dirt never hurt anyone. In fact, we eat 6 pounds of it every year. Then when we die, they bury us under it. I say go for the saw.