Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

new work: Fallingwater chair

Posts

new work: Fallingwater chair

#1

new work:  Fallingwater chair

Robin Corell in Atascadero CA

Here is a pic of a chair I just finished. the design was inspired by two of my precious designs, A bench I made a couple of years ago inspired the shape of the back as well as the carving, and a pair of stools I made about 4 years ago inspired the shape of the front legs.

I have always liked the tall backed chirs of Frank Lloyd Wright and Charles Rennie Mackintosh. Both of these designers were known for designing nice looking but horibly uncomfortable chairs. I wanted my design to look good and be very comfortable too. I am happy with the results.

The chair will make its debut at the San Francisco American Crafts Council show Aug 13-15.

Robin


Re: new work: Fallingwater chair

#2

Re: new work:  Fallingwater chair

Robin Corell in Atascadero CA


Re: new work: Fallingwater chair

#3

Re: new work:  Fallingwater chair

Robin Corell in Atascadero CA

This one was hard to photograph. From an angle you can see that the back is angled but then the subtle "S" shape of the back gets distorted and looks odd.

Re: new work: Fallingwater chair

#4

David Barnett

FLW-CRM in spirit but you made it yours. Love it.

David Barnett

And I will never ever sit on one like it, although yours looks far sturdier and balanced than its progenitors.

Almost two decades ago when I was far more obsessed with woodworking, hearing that John Tierney was teaching one of his weekend chair seminars, I went upstairs to listen while my glue dried, and seeing he'd brought out one of Powell's incredibly delicate, pristine rosewood-&-calf saddle chairs (which they'd been remaking following the '92 Windsor Castle fire), marched toward it as if I was for all the world going to sit in it. John turned a plastiline grey-green and lost facial control as it disappeard behind me and my knees began to bend before I let him off the hook with a "just kidding, John, just kidding." Oh... at the time I weighed conservatively thirty stone.

If Powell had been there I wouldn't have dared, as John's burden was to have the only sense of humor for the both of them.

That truly is an elegant interpretation. The back angle really works visually and has to be more comfortable, and even though it's solidly built still retains a lightness of line and form. Congrats for getting juried into the SF ACC show (not that you wouldn't, but these days... ?).

Re: new work: Fallingwater chair

#5

By golly, I love it!

Thomas Skaggs, Foothills of Mount Level

Robin,

It's been a while since I've seen something new. Worth the wait...definitely. Tall with elegance. The carving work is really a nice touch. You still have it dude!

Tom

Re: new work: Fallingwater chair

#6

Re: new work:  Fallingwater chair

George Colonel's Workshop-Havertown PA

Good Afternoon Robin,

I can see that you were more than multiply inspired when conceiving that beautiful piece of furniture. Congratulations. What was your wood selection, and how was it textured? I really like the touch.

George

Re: new work: Fallingwater chair

#7

Ellis Walentine

Stunning design!

Ellis Walentine

Very beautiful form and detail, Robin. Thanks for posting!

Ellis

Re: new work: Fallingwater chair

#8

Two thumbs up from me.

Keith Newton----Little Rock, Arkansas

Only thing I would like to have seen different, would have been the water texture on the front as well. It doesn't look like the texture would cause any discomfort.

Congrats on the design.

Re: new work: Fallingwater chair

#9

I'll try an make the show

Neal in San Jose

I'll be the one in a Woodcentral hat, and maybe sweat shirt as well! It will be Sunday (probably), will you be in attendance?

Re: new work: Fallingwater chair

#10

Re: Two thumbs up from me.

Robin Corell in Atascadero CA

I agree with you and it would look nice with carving on both sides. Perhaps I can get someone to commission a set with carving on both sides and we can see how it looks.

Robin

Re: new work: Fallingwater chair

#11

Re: By golly, I love it!

Robin Corell in Atascadero CA

Thanks. Iv'e been doing more sculpture than furniture lately. I'll post some pics when I get around to taking them.

Robin

Re: new work: Fallingwater chair

#12

Re: new work:  Fallingwater chair

Robin Corell in Atascadero CA

Thanks for the kind words. The wood is Claro Walnut(juglans hindsii) and the texture was done with a #6 sweep Addis gouge by hand.

Re: new work: Fallingwater chair

#13

Re: I'll try an make the show

Robin Corell in Atascadero CA

The show hours are Fri 10-8, Sat 10-6, Sun 10-5. I will be in booth #815. Stop by and say hi.

Robin

Re: new work: Fallingwater chair

#14

Wow! That's a beauty....

Barry Irby

I like the concept behind the earlier chairs you mentioned. That the high back forms and imaginary "room" where the conversation is confined, but they were uncomfortable and you have kicked this up several notches.

Did you bend the back or saw it to shape? What size plank did you start with with. This is fabulous.

Re: new work: Fallingwater chair

#15

Simply elegant!

Joanne in Point Pleasant, PA

I love when someone figures out how to make something beautiful, "out-there", and comfortable and practical at the same time! This is inspiring. Thanks for sharing. I was waiting for something to make me want to go out into the hot shop to get back to work on projects. I think I'll head out there in a little bit.

Re: new work: Fallingwater chair

#16

Re: Wow! That's a beauty....

Robin Corell in Atascadero CA

Thanks for the comments. I mentioned some of the work that inspired me to illustrate how work can inpire someone without looking derivative.

The back of the chair was sawn rather than bent, I opted to saw it for simplicity. While it was the simplest method it did require tremendous waste. I needed a 16" wide board to get my eventual 6" wide back slat. I cut and shaped 4 pieces out of 2" thick stock and then turned them 90* and glued them together. This gave me an 8" wide board with the taper at the top and bottom as well as the "bend" at the seat. I then cut and shaped the back. Amazingly this chair required 27bf of lumber.

Robin

Re: new work: Fallingwater chair

#17

Re: Simply elegant!

Robin Corell in Atascadero CA

"I was waiting for something to make me want to go out into the hot shop to get back to work on projects. I think I'll head out there in a little bit."

I think that is the nicest compliment I could ever recieve. thank you.

Robin

Re: new work: Fallingwater chair

#18

Barb Siddiqui

Re: new work:  Fallingwater chair

Barb Siddiqui

Stunning design, Robin. It is interesting how projects meld together in the mind of a designer and culminate in something so wonderful. This chair works from every viewpoint. Thanks for showing us!

Re: new work: Fallingwater chair

#19

Outstanding !

Don Orr