Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

28 June 2010

Good Morning Everyone,

Well, it's sure been HOT, humid, and yucky here. June has been a hot month and just making us wonder what July and August are going to be like.!

Got a few chairs repaired and they turn out nice once I'm done, but its surely been an education and an experience in learning how to do this without causing damage to a chair during the repair process. At least I can add this experience to my bag of "been there and done that" tools and tricks.

Been working in the garden. We are getting up early on Monday & Tuesday so we can get out there and work the garden before the heat of the day sets in. I just don't handle the heat like I used to.

The LOML Jr finally decided to get her driver's license and she passed the test last week. Now she's officially a licensed driver. I'm happy for her, but she just hasn't been interested in getting her license until now and here she is about to turn 19. We try and let our kids decide when they are ready for things like this, but only after "dad" trains them in driving for about 6 months.

Well, about time to finish my coffee and get out in the garden.

So what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Completed Work

David Yoho

I put the finishing touches on an antique roll-top desk I've been refinishing and repairing for the past month or so. The owner picked it up yesterday and, once again, was quite pleased with the work I did.

This desk was a daily user belonging to his grandfather that showed the many scars of years of use. I repaired several sections of the framing that had loosened over time, fabricated a new top for the upper tambor unit, as well as drawer pulls for the three drawers. The most difficult part was all the sanding required of this oak that seemed to be as hard as rock. To complicate things more, I had to deal with surfaces that someone previously attempted stripping and sanding without knowing what they were doing!

I finished the desk with coats of Watco Oil followed by Johnson's Paste Wax and a buffing. No wax was applied to the veneered panels or the tambour.

Next up will be an antique china or display cabinet with curved glass that I'm making new shelves and a back for and cleaning and polishing the original finish.

Here are some before and after shots -

Before


After


Before


After


Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

John Veerkamp

Like you I've been up and in the garden/yard early each morning. Blue berries are being very productive this year, but are now slowing down. Only 2 quarts Sat Morning. Finished a small walnut bookshelf that has been 6 months in progress. Back to the lathe today.

Re: WC Weekend Accomplishments....

#4

Re: Completed Work

Larry in NW OHIO

David Great job, I hope the owner is satiafied with it. But for me, no offense here, but I really like the before look myself. I think it has character. Just my opinion. Larry

Re: WC Weekend Accomplishments....

#5

Jim DeLaney, Austintown, Ohio

Re: Completed Work

Jim DeLaney, Austintown, Ohio

It appears the right side has been altered - probably for use as a computer hideaway. Did you do the modification, or was it already there?

'Twould have been neat to have made the door look more like a bank of drawer fronts, but that's just me...

Nice restoration job!

Jim D.

Re: WC Weekend Accomplishments....

#6

Re: Completed Work

David Yoho

Jim, I didn't alter anything. If you're referring to the door on the right side, all I did was fix the door frame that was coming apart. I found grooves in the bottom and top inside that indicated there were once vertical dividers in there. The desk had been in storage for many years and the owner had just decided to have it fixed and use it in his home.

David

Re: WC Weekend Accomplishments....

#7

Re: Completed Work

George Colonel's Workshop-Havertown PA

Good Morning David,

I always had a hankering to build one of those roll top desks. Our present home is too small for such a massive piece, unfortunately. I've refinished several and repaired numerous tambours, so I have some appreciation of what you went thru. I think you did a beautiful job.

George

Re: WC Weekend Accomplishments....

#8

My Wife Left Me

George Colonel's Workshop-Havertown PA

Good Morning Dennis,

Saturday was spent mostly watching my wife pack up and organize herself for a week at the Jersey Shore with my #3 daughter, Kathy's twin sister, her daughter, and several girl friends. I dislike going to protracted hen parties and endless "girl talk". I remain home every year. So I have a nice quiet shop to myself for a week, and can pretty much keep to my own schedule and eat what I want. Vacation time is a great time.

I saw a used D-handle P+C 690 series router in Craigslist and bought it for my #2 son, who is just getting started in wood working. I think I will build a box for it this week, and further avoid doing more lathe work on the chess pieces. Have a good week, Dennis.

George

Re: WC Weekend Accomplishments....

#9

Ellis Walentine

Hot and humid here

Ellis Walentine

Hi Dennis,

I mowed the lawn Friday evening after the temperature had dropped to less-than-lethal levels. Saturday I helped my wife and brother-in-law work on the family farm, and capped the afternoon off with a trip to Frank Klausz's shop for the Lie-Nielsen soiree there. Joanne Adler was my charming chauffeur for that occasion, and came back to my place for a nice summer cookout and some music on the porch. She plays a mean mandolin (and guitar).

Sunday, I passed up an invitation from my son-in-law to go to the Phillies-BlueJays game in Philadelphia. I don't do well on hard stadium seats when the heat index is in the three digit range. Wouldn't you know, the Phils won. Go figure.

I also started a little vessel for John Jordan's maple tree project. He's sent pieces of his beloved sugar maple to over a hundred turners, and we're going to compile a photo gallery of the pieces right here on WoodCentral. That should be very interesting.

Cheers,

Ellis

Re: WC Weekend Accomplishments....

#10

Lee Grindinger

Checked out some oak stains and exotic woods

Lee Grindinger

Well..., kinda...,

Sonoma County, Dry Creek area..., Wine Country..,


Underground cellars at Simi Winery...,


Part of the Sebastiani Tasting facility...,


Lunch.., wood fired gourmet pizza, fine wine and a beautiful setting,


And..., the bark of an exotic tree...,


Re: WC Weekend Accomplishments....

#11

Jim DeLaney, Austintown, Ohio

Re: Completed Work

Jim DeLaney, Austintown, Ohio

Interesting. I wonder what was intended to be stored in there?

Most 'double pedestal' rolltops had drawers on both sides.

Re: WC Weekend Accomplishments....

#12

Re: WC Weekend Accomplishments....

Gary Bindel

Friday, I delivered a set of bunk beds for my grandsons and a headboard for my grand daughter in Indianapolis, about a 360 mile trip. Ran into one problem. I couldn't get the headboard out of the basement. Even after removing the railings and turning it every which way, it would fit. I ended up cutting 2 1/2" off of the bottom. Thankfully, it isn't noticable. Ended up feeling frustrated and a bit stupid. But, forgot about it all when I got to the grandkids.

Re: WC Weekend Accomplishments....

#13

Re: Completed Work

David Yoho

Thanks, George. While I really like the refinishing end of things, as you know it isn't always as easy as it appears. This desk had flat veneered panels and several of them were in need of fixing. However, many times what we do is dictated by the depth of the customer's pockets.

I advised a different finish than the oil but in the end he wanted the same thing I'd used on all the other pieces I'd done for him. The look would have been similar but more protective. Knowing I had to keep within a certain price point, I made recommendations but ultimately went with what he wanted.

In the end he has a usable piece of furniture that will last beyond his years and be passed on to yet another generation. I made several repairs that were surprises but they weren't all that difficult. I'm happy with the work I did do and he's happy, so all's good.

David

Re: WC Weekend Accomplishments....

#14

attended SAPFM midyear conference

Bill Tindall

The work shop teachers were Phil Lowe on some advanced joinery, Donald Williams on traditional finishes, especially shellac, David Lunin on turning a Sheraton leg and Fred Wilbur on carving moldings. Under Don's tutelage I got, for the first time, to successfully brush shellac. that was worth the price of admission. As usual, the member's gallery and slide show contained some period reproduction pieces of exceptional awe and complexity. The museum tour at Winterthur was a disappointment for it was no more than the overview tour given to the public. Unlike the previous tours at the Philadelphia museum and MESDA were we could open things, take out drawers and photograph we were limited to viewing in dim light on this occasion.

Re: WC Weekend Accomplishments....

#15

Re: Completed Work

FredD

I am glad that old workhorse of a desk got to your place for a complete physical David.

As always a happy client is money in the bank down the road , good job.

FredD

Re: WC Weekend Accomplishments....

#16

Finally finished assembling the "Pack Rack"

Simon St.Laurent - Dryden, NY

The Rockler clamp rack thing, anyway. I'd started in January, when my basement was freezing, and only just got back to it now. It's not been a great year for time in the shop, clearly.

Re: WC Weekend Accomplishments....

#17

Fiddler's gathering

Ray - Middletown, IN

You and Joanne would have right at home with me Saturday at the Fiddler's Convention in Battleground In. Workshops for most instruments, an open stage, and several Bluegrass bands strutting their stuff.

Ray

Re: WC Weekend Accomplishments....

#18

Re: Completed Work

Joanne in Point Pleasant, PA

Nice job, David! One of my first big woodworking projects was refinishing a big, old mahogany rolltop my Dad had in a basement somewhere. It came out pretty nice. I need to clear some space here and move in from my mother's house. I'll post pics when I do. Or before, if I can find the ones I know I took a while ago. My biggest challenge was that not all the wood was mahogany and I had to play with stains to try to get things to match.

Re: WC Weekend Accomplishments....

#19

Re: Hot and humid here

Joanne in Point Pleasant, PA

I had a great time visiting with Ellis and going to the L-N event at Frank's shop. Frank is always entertaining. I got to see the next rendition of Noden's inlay cutter (pretty ingenius!). And spend some money on a beautiful low-angle plane. But the best part of the day was kicking back at WoodCentral HQ for a great meal, good conversation, scrumptious garden-fresh blueberries, and some singin' and pickin' with Ellis. Ellis and Candy are the most relaxing and gracious hosts I know and very easy to be with. What a fine day! I am definitely ripping out some hosta and planting blueberries!

Re: WC Weekend Accomplishments....

#20

Re: WC Weekend Accomplishments....

Larry Wyatt

I finished up a keepsake box for my MIL for her birthday. More importantly, Cole got his first stationary power tool use in the shop. We built(actually HE built) a rubber band gun. I let him use the band saw and drill press to do the initial shaping. Then it was on to hand tools(planes, scrapers, rasps, files, sandpaper) to finish the contours and make it smooth.


I was one proud papa! He was, of course, instructed in ALL appropriate safety measures.


He quipped, "dad, it's almost like you're my teacher instead of my dad." He was very happy and very proud!! He did all of the work by himself except for me helping with some end grain hand planing. He is, after all, only 9.

Larry Wyatt

aka Cole's Dad

Re: WC Weekend Accomplishments....

#21

Re: WC Weekend Accomplishments....

George Colonel's Workshop-Havertown PA

Its a great age, Larry. Enjoy it.

George

Re: WC Weekend Accomplishments....

#22

Re: WC Weekend Accomplishments....

Larry Wyatt

Hi George:

My mom used to say, "you kids grow up sooooo fast." I had no idea what she meant. Now I do.

Here's a pic of him on a chair I built him out of a 2x4 in the old Badger Pond days. Some of you may remember this. August 2002.


Larry

aka Cole's Dad

Re: WC Weekend Accomplishments....

#23

The beginning of the end, and a beginning

Bill Houghton, Sebastopol, CA

Before you know it, you won't be able to get to your bench because his projects will be covering it. Best you build him his own bench, if you haven't already.

Re: WC Weekend Accomplishments....

#24

Barb Siddiqui

Beautiful David!  Very nicely done.

Barb Siddiqui

Re: WC Weekend Accomplishments....

#25

Re: WC Weekend Accomplishments....

George Colonel's Workshop-Havertown PA

Good Morning Larry,

It makes you wonder where the time flew, doesn't it? do you still have the chair?

George