Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

19 April 2010

Good Morning Everyone,

The garden is tilled and in the processes of being planted. My daughter is taking charge of the garden and running it as if it was her business. This is good because she has people already placing orders for either plants or veggies once they are harvested.

I now have my second chair here for repair and this one isn't falling apart like the first one was....so I'm thinking this one will require a good bit more care and glue only the joints that are currently loose. I'm just not so sure about taking a half rickety chair totally apart and regluing every joint on the chair. I will have to tinker with this one a bit more and see.

I'm OnCall at work this week, as if last week wasn't long enough and hard enough for me at the day job? This one is going to be even more so challenging.

Well, that's it for me. So what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

Carol Reed

This was the weekend I was duly ordained and installed as pastor. It was awesome! And now that the planning and execution of those events are over, I am heading to my lathe for some R&R.

Re: WC Weekend Accomplishments....

#3

Lee Grindinger

Came in for a landing

Lee Grindinger

Ruthie and I left San Antonio, Texas a couple weeks ago drifting towards the Carolinas for our next stop. Ruthie was (supposedly) going to get a contract at Duke University. We visited friends in the northeast as Duke hemmed and hawed, most notably Ellis and Candy, then found out our next 13 weeks will be in California. We turned the boat around and drove to Santa Rosa, then got settled into our new digs this weekend. It's beautiful here! The adventure continues.

Lee

Re: WC Weekend Accomplishments....

#4

Workbench in place, almost done, but working!

wilbur

I got my workbench almost completed this weekend. It's in the place in my workshop that I want it, and I still need to make some parts for it, but I can use the workbench to finish making those parts.



Re: WC Weekend Accomplishments....

#5

Ellis Walentine

Good work, Carol!

Ellis Walentine

You've worked long and hard to get to where you are. Congratulations, and by all means take some R&R time in the shop. Excellent!

Ellis

Re: WC Weekend Accomplishments....

#6

Re: WC Weekend Accomplishments....

Bruce, a MN Galoot

I was able to get the major pieces of my goddaughter's wedding gift entry table glued together. Liquid hide glue sure makes clean-up a breeze. I all came out square, just like planned :D

Sunday was nice enough that my sweetie and I were able to put 110 miles on the Wing - great ride, but we were a little chilled by the time we returned.

All in all, it was a great weekend (not to mention the fact that I didn't have to work)

Re: WC Weekend Accomplishments....

#7

Congratulations! and ya gotta wonder...

Bruce, a MN Galoot

how many duly ordained pastors relax in front of a lathe.

I hope your parishioners realize how lucky they are.

Re: WC Weekend Accomplishments....

#8

Re: Congratulations! and ya gotta wonder...

Carol Reed

I think they do, Bruce, but I am as fortunate as they! I do know a couple of pastors who relax at the lathe, so I have company in that regard.

Thanks for your good wishes.

Re: WC Weekend Accomplishments....

#9

Re: Good work, Carol!

Larry in NW Ohio

Congrats Carol, you certainly deserve it as hard as you worked for it. GOD has picked the right person to do some of his work also best of luck and GOD Bless. Larry

Re: WC Weekend Accomplishments....

#10

Re: WC Weekend Accomplishments....

Mark Mandell - Gone Round In Jersey

Humped the last of the walnut down to the basement shop and got it stacked, stickered, and weighted for the final stage of drying before I can start to play with it. Shop has that lovely walnuty smell even though the MC is only 14%.

Then got the rest of my turning tools set up in the garage so that one day soon I can start spinning some wood. It's been quite a while with no ribbons flying over my right shoulder. I think the first candidate with be the 30+"x5' maple crotch I have sitting outside.

Re: WC Weekend Accomplishments....

#11

Dale Lenz

Re: WC Weekend Accomplishments....

Dale Lenz

After taking Friday off, still got 91 hours this past week, Wew, glad for the rain, hopefully fire-season is history for a while. Went to see my mother and celebrated her 80th B.Day. She was pleased, as I was also. Got back home about 5:30 last night ripped some lumber, about 120 linear feet. My front pockets were full of sawdust, guess I'm going to start wearing my shop apron when I rip on the TS.

Re: WC Weekend Accomplishments....

#12

Re: Came in for a landing

Dick Haley

Lee,

My wife is a nurse ( mostly hearts, surgery, the last few years) with lots of experience in many areas. She has talkd about travel the last couple of years, do you mind sharing if your wife is listed with an agency and if so what agency?

Thanks, if you care to share.

Re: WC Weekend Accomplishments....

#13

Lee Grindinger

Five actually

Lee Grindinger

Ruthie was an ICU nurse, then moved to dialysis. She works with 5 recruiters/companies and we go wherever the best situation seems to be. It's a great life for us but it's not for everybody. If you and your wife are truly interested give my email to her or Ruthie's (ruthgrindinger@gmail.com) and we'll give you whatever information we can.

Lee

Re: WC Weekend Accomplishments....

#14

A 'Hearty' Mazel Tov to you, good Shepherd!

Joanne in Point Pleasant, PA

May your flock prosper and grow and appreciate your warmth, wit, and wisdom.

Re: WC Weekend Accomplishments....

#15

Re: Five actually

Dick Haley

Lee,

Thanks very much for your reply. My wife will be contacting your wife. So much to think about.

Re: WC Weekend Accomplishments....

#16

Alan Young

Congratulations Carol

Alan Young

It has been a long road. You'll do well now helping others down theirs.

-Alan

Re: WC Weekend Accomplishments....

#17

Re: Congratulations! and ya gotta wonder...

FredD

Well Bruce, if Carol gets stumped for Sermon material someday, she could set up the Lathe and do a demo for a change, sure would beat the vast majority of Sermons I suffered through in childhood. ;-))

FredD

Re: WC Weekend Accomplishments....

#18

You must've gone

Bruce, a MN Galoot

to the same church I did. A lathe lesson would have been far preferable.

Re: WC Weekend Accomplishments....

#19

Finally, Finally......sheet goods storage

Terry Alexander

I am fortunate in that I have a 30x40' workshop with 14' high ceilings. For those of you who have followed my "career", we built an efficieny in 1/4 of the shop where we stayed when we went to the farm (from the DFW Metroplex). Then 2 years ago I got layed off from Citigroup and we came here for good.

NEWay.....I have been building our cabinets, vanities, etc and storage of sheet goods is just a pain.

Soooooo............

I built a cabinet (rough measurements) 3' wide, 4' deep and 9' high. Half of the 3' section is divided into a 5' section and a 4' section. I buy a lot of 5' goods and, even though I haven't yet, the other half is the full 9' tall. So, on the left side, bottom half (5'), I can store 5' goods and on the top half (4') I can store half-sheets of plywood. On the right side I can store full 8' and 9' sheet goods. The top of the unit is for 2x4 storage. I already have an above storage area that is 8' off the floor, 8' deep and 16' wide. This is for "junk" boards and "stuff" (pvc, rebar, etc). It is supported from the purlins by chain.

Like I said in the subject line....finally, finally, finally!

Terry Alexander in West Texas

Re: WC Weekend Accomplishments....

#20

Re: Workbench in place, almost done, but working!

charlie belden

Next up - a wall cabinet behind the bench for all those hand tools stuck on plywood?