Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

splitters what kind do you use and why?

Posts

Re: splitters what kind do you use and why?

#26

Re: splitters what kind do you use and why?

Joanne in Point Pleasant, PA

>On a whim, a few years ago when I took off the stock guard/splitter on my PM contractor saw, I got the little plastic splitter from Micro Jig. The thing works great! I suppose it is similar to the idea of using a washer stuck in the saw insert. I'll try that one of these days.

Re: splitters what kind do you use and why?

#27

Re: Screwdriver on the back side.

mike from american sycamore

>I like IT!!! I had just taken a sip of pop and laughed so hard I all most chocked to death! thanks for a good laugh...

Mike

Re: splitters what kind do you use and why?

#28

Re: Screwdriver on the back side. *LINK*

Fred Davis

>For those of you who use a Unisaw , I made these for mine before I converted the saw to a dedicated rip and put a power stock feeder on it.

They are made from 1/2" Baltic Birch with a splitter insert of wood and on the back four #2 brass RH scres for height adjument.

Since I no longer have a need for the Unisaw to have a Zero clearence insert and they don't fit the PM66 I use daily, your all welcome to these , no charge , postage free.

FredD


http://picasaweb.google.com/FredD17209/ZeroClearen

Re: splitters what kind do you use and why?

#29

I use my own *LINK*

Bricofleur

>I make my own splitters. Tall ones for regular tasks and a short one to use when dadoing. One for regular saw blades and one for thin kerf blades.

Best,

Serge

www.atelierdubricoleur.spaces.live.com


img

Shopmade Tablesaw splitters

Re: splitters what kind do you use and why?

#30

Re: splitters what kind do you use and why?

Mike Fitterling

>BORK from Walnut Acres. It is a aftermarket splitter that is like a riving knife, with the exception that it does not stay level automatically with the top of the blade; instead if you change heights you can adjust the height manually very easily. It does tilt and rise with the blade.


img