Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

OT manual vs. automatic transmission

Posts

Re: OT manual vs. automatic transmission

#26

Jason Roehl in Lafayette, IN

Not just about off-the-line...

Jason Roehl in Lafayette, IN

>Today's engines, due to emissions requirements, tend to have their powerbands at a higher RPM range. As a result, (numerically) higher rear-end ratios allow the engine to stay in that ideal powerband in top gear at highway speed when towing heavy loads. Not to mention, the average size of tires has gone up, also requiring the lower ratios (again, numerically higher, like 3.73 or 4.10:1).

Yeah, I'd rather row my own gears, too, but I don't know that I would go out of my way to get a manual if they are rare in the model of vehicle I'm purchasing.

Jason

Re: OT manual vs. automatic transmission

#27

Re: OT manual vs. automatic transmission

David

>My last truck was a 2000 1500 Silverado, long box 4wd. It was the first automatic I'd ever owned. Problem for me was that the manual transmission offered was a car trany/clutch package, not one designed for a truck. As such, the towing and hauling weights decreased significantly.

Now I drive a 2008 Sierra 2500, automatic, gas, long box, extended cab. Didn't even think to ask for a manual transmission, probably because it was hard enough to find the truck from the start. At least in part, the better fuel economy comes from the programmed shift points. GMC has this thing upshifting as quickly as possible. I like the truck, but tend to push the pedal a little harder than I normally would (or simply go slower).