Powermatic 1800 Bandsaw Review
Thomas Skaggs, Foothills of Mount Level
>I recently had the opportunity to use some business income to address some tool needs in the shop. I had a Laguna 16 HD Bandsaw and while it was adequate most of the time I do, from time to time, have needs of a bandsaw with greater capacity. I wish I had a dollar for every time I needed to resaw a board that was 12 1/2" wide. (The Laguna capacity was 12").
I then came to learn of a brand new bandsaw, just released by Powermatic. The PM 1800 bandsaw was just released a few months ago. It is the first of a brand new line of bandsaws that PM is creating. These new saws are serious machines that have been re-designed top to bottom to address the shortcomings of other machines. And from what I have experienced, they have a winning design.

The PM 1800 Bandsaw is an 18" saw. However, it also has an 18" resaw capacity. It is a large machine and weighs over 800 lbs. It is very robustly built. Everything is beefy on this machine.

The riser is very rugged and the euro guides are very sophisticated in how they adjust. There is a nice height gauge for the riser adjustment wheel. Perhaps one of the coolest features is that big arm and handle. By simply turning it one way or another you can put the blade into tension, into relax or into loose for blade change. Whe you wish to use the machine again just turn the handle and you can place your blade back into whatever tension you want it to be. (very nice) With a different wheel you can dial in whatever tension you wish for any given blade. There is an indicator for tension measurement.

The table is really nicely made. Large, ground smooth and flat. The fence is really huge and is attached to a rectangular tube rail....essentially like a table saw fence system...along with a measurement guide. It glides and locks beautifully. There is a large resaw bar guide that is an optional attachment included with the saw.
Below the table is a beefy trunion system. Unlock the trunion and the wheel allows you to crank the table to your desired angle...again, very cool. There is a foot brake, and 2 dust ports. There is a lighted switch with a huge stop button that's easy to see and hit for safety.

The wheels are computer balanced and huge. The machine has a 5hp motor. Advice...make sure you have a 40 or 50 amp circuit. This baby draws some power when it starts up. But it purs like a kitten when its at speed.
Ok, I'm pretty smitten with this new machine. I've done my best to remove the rose colored glasses and yet I still believe that Powermatic has done a fantastic job with this new saw design. I really haven't found a single thing to fuss about. And near as I can tell, this is my last bandsaw purchase. Admittedly, it's perhaps an overkill machine for most shops. But for those who seek a first class bandsaw with lots of capacity and power I would highly recommend the PM 1800.
Tom



