Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Restoring color to Purpleheart

Posts

Restoring color to Purpleheart

#1

Bart Goldberg

Restoring color to Purpleheart

Bart Goldberg

>Hi All,

I'm making some gift boxes using purple heart components and discovered that when I mill purple heart, its deep purple color is not retained, but instead it gets a sort of a light red/orange sort of color. Is there any way to recover the original deep purple color?

Thanks

Bart

Re: Restoring color to Purpleheart

#2

Re: Restoring color to Purpleheart

Robin Corell in Atascadero CA

>the light color is the natural color of the inside of a board. It turns the deep purple color with exposure to the air. a couple of days and it will get there.

Robin

Re: Restoring color to Purpleheart

#3

Re: Restoring color to Purpleheart

Larry in NW Ohio

>Bart The best way I found to do it is to just let the board set in some light, like just your shop light or shade. Do not put it out in the sun. Larry in Ohio

Re: Restoring color to Purpleheart

#4

Re: Restoring color to Purpleheart *LINK*

John K Jordan

>I've found purple heart is kind of brown but will regain color as it oxidizes. However, eventually it will lose the color again. I've always thought we should just dye it and be done.

Jim King, an exotic wood dealer from Peru once said that purple heart is widely used as a junk wood for railroad ties, packing crates, and pallets. Regardless of what we do, it will eventually lose it's color.

You may be interested in the thread below from the Turning board a few years ago.

JKJ


keeping purpleheart purple thread

Re: Restoring color to Purpleheart

#5

A.J. Hamler

An historic purpleheart use

A.J. Hamler

>When they rebuilt the schooner Amistad in the shipyards at Mystic Seaport (Conn.) a few years ago, they used purpleheart for the keel. It took two years to build the ship, which was launched in 2000.

I did a lot of historical roleplaying stuff with the Seaport when I was still in Connecticut, and saw the ship at several stages of its construction. It was pretty cool to see all that purple wood going into the backbone of the ship.

A.J.

Re: Restoring color to Purpleheart

#6

Re: Restoring color to Purpleheart

George@Colonel's Workshop-Havertown PA

>Good Evening John,

That was a very interesting discussion. It feels good to be less ignorant than I was yesterday. Thanks for the link.

George