Wear your ear protection.
John K Jordan
>
Knowledge You Can Build On — Est. 1998
Wear your ear protection.
John K Jordan
>
Re: That's what he told me
Brian in Brighton
>He told me that. How many he went to, I can't be sure. He did say that his initial goal was to license the technology. When no one would touch it, and he said three told him to put it away, he got some investors and took it to market.
Brian in Brighton
Re: That's what he told me
Sgian Dubh
>Brian, I have a suspicion that he meant he'd only approached the North American brands. Certainly North American brands of table saws, eg, Delta, Powermatic, General, etc, have virtually zero European market share as all of them fail to meet EU safety requirements. A few are imported by amateur woodworkers to work the 'Norm' way, but there aren't any of those brands found in professional workshops.
That's true for all the other woodworking equipment made by those same manufacturers. You'll never see a Delta or a Powermatic surface planer, thicknesser, spindle molder, bandsaw or anything else in European workshops.
We do see Jet machines, but they're all reworked to comply with the EU safety regulations, but Jet headquarters are in Europe anyway, and the same parent company owns Powermatic. Slainte.
Re: That's what he told me
wilbur
>Boy, those are some dedicated amateur woodworkers, importing tools from the U.S.
I once looked into how difficult it would be to import a woodworking machine to the U.S. from Europe. Gave up quickly.
Which begs the question: given the variety of machines available across the pond, why would you want to import a machine to the E.U. or U.K. from the U.S.? It can't be for the safety features. :@)
Re: That's what he told me
Sgian Dubh
>wilbur, it is a fascinating thing for sure. Why would anyone over here want to import US style table saws? The answer I think lies in the popularity of the Norm Abrams show in a small and dedicated section of the amateur woodworking fraternity.
Norm, as far as I know, is completely ignored by all of us professionals. His working methods are pretty much counter to everything we are taught about safe woodworking. The machinery he uses, particularly the saw with its dado blade capability, full length rip fence, lack of guards and its inability to bring the blade to a dead halt in less than ten seconds fails all the important safety requirements. Without major modifications the popular 'cabinet' saws and 'contractor' saws sold to the North American buyer I'd say are unlikely to appear on showroom floors here.
Still, there are those dedicated amateur woodworking fans of American style woodworking, as popularised by Norm, that want the US style machine. They even adopt the American woodworking jargon and talk about things like dados, rabbets, half blind dovetails, jointers and shapers. And there's a company that imports Delta cabinet saws with Biesemeyer like fences and gooses with the motor and stuff so that they work over here.
So, there they are, a dedicated band of Norm fans, happy installing dado blades in American style saws and working the American way. As they're amateurs they can do what they like. But should one ever decide to get a job as a furniture maker in a professional workshop they'd have to ditch all those North American techniques PDQ. Incidentally, dado blades aren't illegal here, but you can't fit one on a bench or table saw. The arbor's are deliberately too short which stops that practice in its tracks. Slainte.
Re: That's what he told me
Denis Ch�nard, Orl�ans, Ont.
>Your assessment of Norm's methods is bang on IMHO. I am appalled by his apparent lack of concern for safety (despite the disclaimer at the beginning of every NYW show), God knows how many work wood the way he does because they think it's safe. That's just too bad, I learned a lot through NYW over the years.
But I fail to see what's wrong with dado blades. I'm a safety nut yet I've never felt in danger using them (not that much, mind you). To me a single blade that sits higher than the work piece is more dangerous. Care to enlighten me on this?
Thnx,
DC
Re: That's what he told me
Sgian Dubh
>Denis, I think the main problem from the Health and Safety Executive's (HSE) point of view were the number of serious and fatal injuries professional woodworkers were incurring in which the dado heads were implicated.
As in the US, where dado blades are still current practice, there's a tendency to use the tool unguarded. This led to the injuries, kickbacks and so on. The regulations do allow a dado blade to be fitted to a bench saw, with the proviso that adequate guarding is also installed. As it's seldom that a saw user sets up proper guarding-- something I can vouch for having worked in the US and seen some of the clownish tricks woodworkers there get up to-- I think the manufacturers read the regulations in their own way.
They simply made the arbors too short to accept a dado blade. They, the manufacturers, also knew how the woodoworking industry employees used dado blades and I guess they didn't want to be held in any way liable-- they saws aren't easily modified to accept the extra guarding the HSE expects.
Anyway, there are plenty of other ways to knock out grooves, housings and the like efficiently and quickly, that are a good deal safer. I've never found a situation where the only suitable tool would be a dado blade in a table saw, but that goes back to the way I was trained. Slainte.