Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Cabinet in the Style of Garry Knox Bennet

Posts

Cabinet in the Style of Garry Knox Bennet

#1

Alan Young

Cabinet in the Style of Garry Knox Bennet

Alan Young

>I was finishing up installing a lighting system on some bookcases when I got some last minute inspiration from the Garry Knox Bennet Nail Cabinet.

I think the value of my bookcase should triple.




Alan

Re: Cabinet in the Style of Garry Knox Bennet

#2

Uhhhhhhhh....................

Dan Donaldson

>Somehow I am not sure that look is going to be too popular ;-)

Re: Cabinet in the Style of Garry Knox Bennet

#3

Alan Young

Maybe you're right...should I use a brass screw ?

Alan Young

>

Re: Cabinet in the Style of Garry Knox Bennet

#4

Re: Uhhhhhhhh....................

Larry in NW Ohio

>Oh I don`t know Alan, and Dan. I did that a couple of times and increased the price only 50%, don`t want to be greedy, of course they haven`t sold yet, but I just think the look hasn`t quite caught on just yet. Larry in Ohio

Re: Cabinet in the Style of Garry Knox Bennet

#5

Steven Antonucci

You need to bend it

steve antonucci

>Won't be worth much if it can still be removed and patched :-)

Steve

Re: Cabinet in the Style of Garry Knox Bennet

#6

Clinch it over,

Ray Thompson - Middletown,IN

>That will hold that pesky panel in.

Ray

Re: Cabinet in the Style of Garry Knox Bennet

#7

Alan Young

Steve & Ray- The problem with bending the screw

Alan Young

>is that it is a black drywall screw. An attempt to bend it could backfire with the screw breaking..That will then look as though I thought I had made a mistake and was trying to fix it. It will therefore lose all rebellious artistic value....

Now if you suggest a way to remove that screw and replace it with type that I could smash over without the screw snapping...well I'm all ears!

Alan

Re: Cabinet in the Style of Garry Knox Bennet

#8

Alan Young

Also...

Alan Young

>The bend in the screw must occur on the exit side or the out side. Otherwise it will just look like I was sloppy and drilled it in at a bad angle.

Alan

Re: Cabinet in the Style of Garry Knox Bennet

#9

Wire to 120v hot via 1 meg ohm resistor,

Eddie Pacheco; San Jose, Ca.

>That way it'll be an attention getter, but not a widow/er maker.

Glad to see that you pro guys sometimes do last minute embelishments to your work...:-)

Re: Cabinet in the Style of Garry Knox Bennet

#10

Alan Young

The key to fine craftmanship is to recognise

Alan Young

>when a chance for inspiration is right there in front you-

"Carpe Mistakume" I always say..

Alan

Re: Cabinet in the Style of Garry Knox Bennet

#11

Glue a contrasting block on it to catch the eye

Wayne Carson "TX"

>

Re: Cabinet in the Style of Garry Knox Bennet

#12

Time for some Bondo.. Cabinetmakers best friend

John Cotten

>Next to a sharp pencil when ordering from you suppliers.

Re: Cabinet in the Style of Garry Knox Bennet

#13

screw avant-garde

Robin Corell in Atascadero Ca

>Just a creative sugestion, but have you thought about instaling more screws from the back on say a 1" grid. One screw could possibly be seen as a mistake, but a pattern created by a hundred screws could never be seen as a slip up.

keep up that avant-garde work, someone has to make.

Robin

Re: Cabinet in the Style of Garry Knox Bennet

#14

Discount

Thomas Skaggs, Foothills of Mount Level

>Knock five bucks off and leave it as is. ;-)

Tom

Re: Cabinet in the Style of Garry Knox Bennet

#15

Get a torch and take out the hardness

Ray Thompson - Middletown,IN

>If you are careful the scorch pattern will be quite attractive and take the eye away from the screw.

Ray

Re: Cabinet in the Style of Garry Knox Bennet

#16

Re: Discount

Barry Irby

>In my work as a Home Inspector people often complain about a "nail Pop", A bulge in the drywall where a fastener if backing out under the drywall compound. My response is often, "Wow, think of all the ones that they got right." I explain that there are hundreds or thousands of nails and screws holding the drywall and this is the only one acting up. Actually pretty good, huhh? Of course they are looking at me as if I might be insane.

So if this is a paying job, point out that there are a hundred screws or nails that are not offending them and offer an appropriate discount.