Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

shop-made drum sander drum material?

Posts

Re: shop-made drum sander drum material?

#26

Re: shop-made drum sander drum material?

Ernie Miller

>Look for a farm salvage yard there in Iowa. See of they have rollers for Ag. convayor belts Think Hay bails here. they are about 2' long and 4-6" in diameter. I bwt you could pick one of for a couple twentys or less. Could probably get the pillow bolcks included for you money. if you get one from the drive end it will bave a pulley all ready attached. All you need is a couple wrinches and an afternoon in the Iowa sun.

Re: shop-made drum sander drum material?

#27

Delta or Grizzly? *LINK*

Brad Knabel

>Hi Carol,

I honestly don't know if this would work for you. But Delta lists part #406133620001 at $102.89. This is the drum assembly from their 18/36" drum sander. I found the Grizzly 24" drum (#P1066071 @$168.75) and 16" drum (#P1079071 @100.00) as well. Performax doesn't seem to have their parts available for sale online. (At least not in the 2 or 3 minutes I took to look on their site...) But I'm sure you could call them if you are interested.

The price is a little steep, but if it saves you a few hours of searching and futzing it might be worth a look. I don't know how much more work would be involved in making one of these work, but it's probably a bit less than the pipe you are looking at.

I simply went to Delta's web site and logged into ServiceNet (registration is free). They have complete parts diagrams and pricing. For Grizzly I just went to the product pages for the appropriate sanders. Grizzly has a link right on the product page for parts for some of their products.

Good luck with whatever you choose. I look forward to hearing your progress.

Brad


https://www.dewaltservicenet.com/

Re: shop-made drum sander drum material?

#28

Rick L

Re: What brand stroke sander was it?

Rick L

>There is a bit of a learning curve to them. They really are excellent machines if you can master them. Not necessarily the easiest machine to teach yourself. There's a lot of subltle nuances to it. We used to sand the dovetails on drawers. Flexible j weight belts can sand radiused pieces. You can go much wider than a drum or widebelt. Building a drum sander is going to cost more than buying one. We build machines all the time but it has to be something we can't buy or find used. We recently build a traveling sander sand 5,000 glulam beams. It was easier to make a self propelled sander than to try an feed 1,000 lb beams through a machine.

Re: shop-made drum sander drum material?

#29

Re: shop-made drum sander drum material?

Dave LaPine

>Did you look at "A shop built drum sander" by Ray Lanham in Woodcentral under articles & reviews? It had some good info.

Re: shop-made drum sander drum material?

#30

Re: shop-made drum sander drum material?

ben d.

>A real wad of drum sanders on here tonight so my 2 cents worth and will post a pic. of one I built. I built a 24" drum that will actually sand about 22 1/2 in. Built the drum out of maple blocks glued together with a 7/8 hole through and a 3/4 shaft. Keyed ends on the shaft and drum is 4 1/2" dia. bought 4" aluminum pulleys cut into and recessed the ends of the drum these are held in place by 4 1/4" tie bolts and then turned to 4 1/2" round on the wood lathe. Bought a drum update kit from grizzley that included velcro for the drum and sandpaper to go on that, since it was for a larger drum had to taper the ends different but worked fine and no problem with sander.

Manual feed crank up table and a catcher on the outside of the drum so throw backs are few. works well for my piddling.


img

Re: shop-made drum sander drum material?

#31

Re: shop-made drum sander drum material?

ben d.

>A second picture


img

Re: shop-made drum sander drum material?

#32

Re: What brand stroke sander was it?

Carol from AZ

>Brand? Too Long ago. Can't remember, but it was a monster. Took tons of floor space. It was a 'commercial' model, what ever that means. It was intended to be used in a commercial cabinet shop. I finally did find one to come and get it.

Re: shop-made drum sander drum material?

#33

Re: shop-made drum sander drum material?

Carol from AZ

>Thanks Ben, the pictures are very helpful, and thanks for the Grizzly info. I will check that out.

Re: shop-made drum sander drum material?

#34

Re: shop-made drum sander drum material?

Carol from AZ

>I did. Thank you.

Re: shop-made drum sander drum material?

#35

Performax RAS drum sander *LINK*

Jim

>Performax used to sell a sander that attached to the post on a radial arm saw and used the motor for the power source. I found one at an auction and am using the drum (22" wide)to build a sander. If your patient and attend auctions, this might be asource of a drum. Also, try Googling "drum sander" for more information.


http://www.stockroomsupply.com/

Re: shop-made drum sander drum material?

#36

Re: shop-made drum sander drum material?

Dave LaPine

>Ben- That's pretty neat. What motor is on that?

Re: shop-made drum sander drum material?

#37

Re: shop-made drum sander drum material?

ben d.

>1 hp 3450 rpm w/2" pully on motor and 4" on drum. I think rpm is correct without looking. any cut motor speed in 1/2.