WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Monday, make some cash

Posts

Monday, make some cash

#1

Monday, make some cash

Gary Smyth



Here�s a bit of trivia for those of you who want to make a little cash.

Today�s question. What is this item called?

I found this one on one of those arteeest sites that is promoting gifts for Father�s day. Here ya go. Only $300, the shipping is free, AND comes complete with directions for use and installation. Here is an edited description.

�Reproduction Antique � is made by hand, following the exact look of original � from the early 1800's� 21 inches wide by 42 inches tall, 3 inches deep, 36 holes in vertical or in new form, horizonal format. They are distressed by hand (read keys thrown at them and pounded with chisels and metal) to make it appear well aged and used over time. No two turn out exactly alike, so � will be uniquely yours

We offer three finishes: Oak, Walnut and Kona Brown. You can see these colors in the second photo of our listing. We are happy produce in one of these three colors, or if you have a different color in mind, please let us know and we will gladly make that happen for you.�

Re: Monday, make some cash

#2

Re: Monday, make some cash

Ken Oakley-Sunny St. Cloud, Fla

I have made a few , but never got $300.00 for mine. They are Wine Racks.

Re: Monday, make some cash

#3

This could be a short day.

Gary Smyth

They can do that. As a bonus, they also can be used to hold candles - not included for the $300. There is a specific name I'm looking for for these reproductions that are so faithful to the original (Did they have 2x4s with current dimensions back then?) - notice the extra supports behind the holes. So no gold star yet.

Re: Monday, make some cash

#4

Some sort of riddle

Lee Schierer McKean, PA

:D

Lee

Re: Monday, make some cash

#5

Trick Question

Thomas Skaggs, Foothills of Mount Level

Clever you...we took the bait...wine racks...Ha! Clearly they are Lasagna strainers.

T.

Re: Monday, make some cash

#6

No use prolonging.

Gary Smyth

Answer: Riddling rack. Lee gets the gold star and a necked bottle to start his project.

Note: The arteest selling these mounts his/her creation on the wall in one position, making it more difficult to be an accurate reproduction -- but with already filtered wine it is merely as some have pointed out a expensive rack for holding stuff.

Bottles of new champagne are stored on their sides in deep cellars in Champagne, France. This wine is now stored sur lie, or "on the lees" (the dead yeast cells and sediments trapped in the bottle). This aging process creates champagne's texture and the complexity of its bouquet. The amount of time Champagnes spends sur lie bears a direct correlation to its quality: the longer the aging, the more complex the bubbly.

Riddling racks are critical to the process of making Champagne. After the sparkling wine has aged on the lees or it' s yeast , it is ready to be finished. Remuage or riddling is the process that collects the yeast and sediment in a bottle and concentrate it near the mouth of the bottle.

After initial fermentation in the bottle, the bottles are inclined at a 45-degree angle on a riddling rack, which is made up of two simple rectangular boards hinged at the top. Each side is consists of bored holes, totaling six along ten rows able to hold the neck of a champagne bottle. This means each accurate riddling rack can hold 120 bottles. Some riddling racks can hold more. The riddler puts the neck of a bottle of Champagne in each of the holes. A mark placed on the bottom of each bottle acts as a reference marker, with all markers on all bottles in the rack pointing in the same direction.

Over the next few weeks on a daily basis, the riddler rotates every bottle a few degrees which is an art unto itself. At the same time he raises the bottle's bottom slightly, lowering the neck maybe a centimeter or two each week. After a few weeks bottles that started at a 45-degree angle are now slanted to a 60-degree angle and are neck-down in their holes.

After riddling is complete, the Champagne bottles are then placed in a sub-zero solution for several minutes forming an ice plug made of the spent yeast and sediment in the necks. They are then are disgorged which means to remove the crown caps from the bottles resulting in the pressure within the bottles shooting out (disgorges) the ice plug (with the frozen sediment trapped in it). It is recapped and sent off to be cosumed.

To the furniture guys. Think $300 a pop for this is an opening for you? I'm betting you might be able to toss in a back and a hinge and still do well.


Re: Monday, make some cash

#7

Re: No use prolonging.

Ken Oakley-Sunny St. Cloud, Fla

They look like the ones I made, only I was paid $150 for the ones I made. No Fame, no Fortune.

Re: Monday, make some cash

#8

Double your price and put it up on etsy

Gary Smyth

More than a few out there who will pay. I'll give the "arteest" credit though, he/she found a niche and a site to sell.

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.