WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Thursday trivia

Posts

Thursday trivia

#1

Thursday trivia

A couple of questions about the old conestoga wagons:

1) The bottom of a conestoga wagon is not flat. Why not?

2) What was the carrying capacity of the average conestoga wagon?

Re: Thursday trivia

#2

Re: Thursday trivia-WAG's

#1 is probably so it is more stable when floating during river crossings

#2 1000 lbs?

Re: Thursday trivia

#3

no and no ;-)

Re: Thursday trivia

#4

Dale Lenz

Re: Thursday trivia

Your first question has a shifty answer, : ' >. Thanks for the questions

Re: Thursday trivia

#5

I'm with Dale

It's all those stumps, hills and valleys. As to cargo it's about half of the total weight as there was much hanging off the wagon in the way of water, tools, jacks, plus the running gear and wheels were massive.

Re: Thursday trivia

#6

Dale Lenz

Re: #2 question *LINK*

The answer, I think? Is in the link below.


Answer(?)

Re: Thursday trivia

#7

close enough

I got 12-14000 pounds for this one.

Re: Thursday trivia

#8

;-)

Re: Thursday trivia

#9

answer

For #1, the bottom was curved so that when you stacked a load and it shifted, it shifted toward the center rather than off the wagon. The capacity that I found was between 12000 and 14000 pounds. Probably would not want to try to tow a loaded one with a shetland pony ;-)

Re: Thursday trivia

#10

Re: Might...

need a baseball bat with a shetland pony, those things bite! I was thinking about the roads needed for 6-7 tons on relatively narrow wagon wheel. No X county, and for dry weather only, huh?

Thanks again for the education.

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.