WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

1st question not wood but..

Posts

1st question not wood but..

#1

1st question not wood but..

By the light of the Hunter's Moon this is not woodworking but it’s worth a thought or two. It was more interesting than what I had planned.

_____ September/October,2005

The Office of Naval Research announced the christening of the (one word) Electric Ship (one word) on (month) 24, 2005. The ceremony took place at the Naval Surface Warfare Center…Chief of Naval Research…Admiral… delivered the address and…wife of vice president of naval engineering… broke a bottle of champagne across the bow… 133 foot long ship (about 25% estimated size) will serve as a model representing a destroyer size ship…. An underwater discharge waterjet ...allows the vessels to operate in shallow water with increased maneuverability and stealth…and a propulsor…for evaluation…that relies on a permanent magnet motor to drive the propeller.

With the exception of the parenthetical statements this is a published press announcement. So not a secret base.

The question is: Where is this base located for medium to large models and other stealthy ships tested. Hint it is within continental U.S. waters, and I think by location unusual. I get the feeling that the small community of scientists at that base must be similar to Los Alamos during WWII

Re: 1st question not wood but..

#2

Would this be...

A base on the same lake where submarines are still tested?

glc

Re: 1st question not wood but..

#3

Steven Antonucci

Davidson Lab?

Any chance it's my alma mater? Steven Insititute of Technology in Hoboken, NJ? They do all kinds of testing there...

Steve

Re: 1st question not wood but..

#4

Not N.J.

Re: 1st question not wood but..

#5

At the risk...

of answering the question it might be. It was such a surprise to me that this would be the place at that place. Provide me more detail please. My place is for surface ships, but if you have a facility why not use it for subs too?

Re: 1st question not wood but..

#6

Re: At the risk...

Boy I'm also not sure how to answer with out giving it away either but I would think it was the Idaho location and not the Nevada location.

glc

Re: 1st question not wood but..

#7

Gary got it...

Answer: The article is from Ocean News and Technology, September/October 2005

p.50,

Full release is http://www.onr.navy.mil/media/article.asp?ID=97

The ship is being tested, with others, is at Naval Surface Warfare Center (NSWC) Carderock Division, Acoustic Research Detachment in Bayview, Idaho. The facility is on Lake Pend Oreille. IDAHO! The test platforms are from Rolls Royce and General Dynamics and the ship is called the Advanced Electric Ship Demonstrator (AESD). If you wish, the net has info about it along with a picture. Look under under its full name.

I bet in the winter months it gets pretty closed in at that facility as the town is only 300 or so people full time. http://www.globalsecurity.org/military/facility/bayview.htm Brrrrr. Idaho.

Gary, Point me in the direction of Nevada for NAVY research/ships. I don't know about that one. Lake Pyramid or Mead?

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.