serving tray
Wife wanted one for herself. I probably made a dozen of these and gave them all away.
serving tray
Posts
Re: serving tray
#2Re: serving tray
SWMBO rules
Re: serving tray
#3
Tell us more
How big? What species? What kind of lathe is that? Bigger picture?
Ellis Walentine, Host
Re: serving tray
#4Re: Tell us more
The tray is 13.5 in dia. I built the lathe about 20 years ago. I'll get a couple pictures later.
Re: serving tray
#5Re: Tell us more
I turned the spindle with 1 1/2 inch 8 TPI. Bored it to fit a number 3 taper. It runs with a 220 volt DC vari. drive controller. The tailstock is from an old lathe I scrapped. It's about 5 feet between centers and swings 24 inches.