Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

advice about the motor change

Posts

advice about the motor change

11/17/15, 11:52 AM #1

Christopher
Guest

advice about the motor change

Christopher

Hi folks,

I can not work more, becasue of the problems with motor. It does not work.

I have this one https://www.mrosupply.com/motors/ac-motors/general-purpose-motors/1311213_00118es3ed56cfl_weg/

All technical specifications are the same too.

Who can advice how to test it and repair.

thanks very much

Re: advice about the motor change

11/17/15, 1:53 PM #2

Dave Paine
Member
Offline
682 posts

Registered: 7/30/08

Re: advice about the motor change *LINK*

Dave Paine

You do not provide much information for others to assist.

The motor in the link is a 3 phase motor, so likely you have an inverter or VFD to convert single phase power to 3 phase for the motor.

If you have an inverter does it display and error message?

What testing tools do you have available? Have you tested that power is going to the inverter and from the inverter to the motor?

The site has a number of threads on inverter problems. The link is a recent example.

http://www.woodcentral.com/woodworking/forum/turning.pl/md/read/id/485740/sbj/powermatic-inverter-dead/